Zigbee Boards
Showing all 4 results
-
Zigbee Boards
XBEE Arduino Shield
XBEE Arduino Shield Features:
- Mounts directly onto your Arduino
- DIN and DOUT pins of XBee can be connected to either the UART pins or any digital pin on the Arduino (D2 and D3 default)
- 3.3V power regulation and MOSFET level shifting on-board
- 9×11 grid of 0.1″ spaced prototyping holes
- The reset button brought out to shield
- Power, DIN, DOUT, RSSI and DIO5 indicator LEDs
SKU: n/a -
Zigbee Boards
XBEE Breakout Board Zigbee
XBEE Breakout Board Zigbee Features
- Industry’s fastest path to embedded cellular connectivity
- Smallest end-device certified embedded cellular modem on the market
- Pre-certified, Verizon end-device certified, and pre-provisioned on the cellular network</li></li>
- Authentic 20-pin XBee Through-Hole form factor
- Standard XBee AT and API interfaces
- 3.3 V power for battery-powered applications
- OTA firmware updates
- SSL/TLS for secure communications
- Configure locally with XCTU or remotely with Digi Remote Manager
SKU: n/a -
Zigbee Boards
XBEE Module Zigbee (S1/S2)
XBEE Module Features & Specifications:
- Indoor Range up to 100 ft. (30 m) & Outdoor RF line-of-sight Range up to 300 ft. (100 m)
- Interface: Serial(UART) at 1200-115200 bps
- Supply Voltage: 2.8 – 3.4 V
- Transmit Current (typical) 45mA (@ 3.3 V)
- Idle / Receive Current (typical) 50mA (@ 3.3 V)
- Operating Frequency: ISM 2.4 GHz
- Antenna: Whip antenna
- Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
- Number of Channels: (software selectable) 16 Direct Sequence Channels
- Addressing Options: PAN ID, Channel and Addresses
- ADC and I/O line support
- AT and API Command Modes for configuring module parameters
- Extensive command set
- Small form factor
SKU: n/a - Indoor Range up to 100 ft. (30 m) & Outdoor RF line-of-sight Range up to 300 ft. (100 m)
-
Zigbee Boards
ZigBee Dongle
ZigBee Dongle Features & Specifications
- Texas Instrument CC2530 SoC
- USB 2.0
- FTDI Virtual COM Port
- ZigBee Profile: Home Automation 1.2
- OTA Programming
- LED Indicator
- Frequencies: 2.4GHz
- Output Power: 17 dBm
- RX Sensitivity: -101 dBm
- Data Rate: 250 kbit/s
- Range: 200 meters (outdoor)
- Operating Humidity: up to 90% non-condensing
- Operating Temperature: -10° to 50°C
- Dimension: 89 x 27.8 x 12.7 mm
SKU: zigbee-dongle