Amplifier
Showing all 5 results
-
Analog and Digital Converters
ADS1115 16-Bit ADC 4 Channel Module with Programmable Gain Amplifier
ADS1115 Module 16-bit ADC 4 Channel Specifications:
- WIDE SUPPLY RANGE: 2.0V to 5.5V
- LOW CURRENT CONSUMPTION: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
- PROGRAMMABLE DATA RATE: 8SPS to 860SPS
- INTERNAL LOW-DRIFT VOLTAGE REFERENCE
- INTERNAL OSCILLATOR
- INTERNAL PGA
- I2C INTERFACE: Pin-Selectable Addresses
- FOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS
- PROGRAMMABLE COMPARATOR
- This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers
SKU: n/a -
Modules and Motors, Other Electronics
PAM8610 Amplifier Board Dual Channel XH-M181
PAM8610 Amplifier Board Specifications:
- Class D work
- Chip Type PAM8610
- Power range DC6-15V
- Recommended voltage DC12V 2A
- Dimensions 28 * 22 * 2.5
- Output power 10W * 2 (8 ohms) 15 * 2 (4 ohms)
- Frequency response 20HZ-15KHZ
- Channel type two-channel
- SNR 90db
- Weight 3g
SKU: n/a -
Modules and Motors
TDA7297 Audio Amplifier Module
TDA7297 Audio Amplifier Module Specifications:
- Output Power: 15W + 15W (RMS)
- Supply Voltage: 6V – 18V DC
- Input Impedance: 22k ohms
- Signal-to-Noise Ratio (SNR): > 85 dB
- Total Harmonic Distortion (THD): < 0.05%
- Frequency Response: 20Hz – 20kHz
- Efficiency: > 90%
- Dimensions: 65mm x 56mm x 20mm (L x W x H)
- The Blue LED indicator light will be on when amplifier power on.
SKU: n/a -
Modules and Motors
TDA8954TH Amplifier Board Dual Channel XH-M252
TDA8954TH Amplifier Board Specifications:
- Product Model: XH-M252
- Amplifier chip: TDA8954TH
- Input voltage: recommended AC dual 24V (up to 30V)
- Amplifier power: 2x420W
- Number of channels: left and right stereo
- Output impedance: 2-8Ohm
- Appearance size: 107*93*30mm
SKU: n/a -
Modules and Motors
WTV020SD-16P MP3 Music Module for Arduino
WTV020SD 16P MP3 Music Module Specifications:
- Voltage Input: 3.3V – 5V
- Current Consumption: <50mA
- Audio Output: 16-bit DAC
- Supported Audio Format: MP3
- Storage: MicroSD card slot (supports up to 32GB)
- Control Interface: UART (Universal Asynchronous Receiver-Transmitter)
- GPIO Pins: Yes, for external triggers
- Volume Control: Yes, Adjustable
- Dimensions: (L x W x H) 29mm x 21mm x 4mm
- Weight: <5g
SKU: n/a
