PCF8574 Module IO Expansion Board for I2C Bus
Features
• Low standby-current consumption of 10μA max
• I2C to parallel-port expander
• Open-drain interrupt output
• Compatible with most microcontrollers
• Latched outputs with high-current drive capability
for directly driving LEDs
• Latch-up performance exceeds 100mA per JESD
78, Class II
₨180
ComparePCF8574 Module IO Expansion Board for I2C Bus is designed for 2.5V to 6V VCC operation.
The PCF8574 device provides general-purpose remote I/O expansion for most microcontroller families by way of the I2C interface [serial clock (SCL), serial
data (SDA)].
The device features an 8-bit quasi-bidirectional I/O port (P0–P7), including latched outputs with high-current drive capability for directly driving LEDs. Each
quasi-bidirectional I/O can be used as an input or output without the use of a data-direction control signal. At power on, the I/Os are high. In this mode, only a current source to VCC is active.
PCF8574 Module Price in Pakistan
PCF8574 expansion board Price in Pakistan
Related products
-
-
Modules and Motors
ACS712 Arduino Current Sensor
ACS712 Arduino Current Sensor Voltage Output
- 1/2 VCC when no load or it is 2.5V since we use 5V as VCC.
- 5A type generate 185mV every amp current
- 20A type generate 100mV every amp current
- 30A type generate 66mV every amp current
SKU: acs712-current-sensor -
-
Modules and Motors
L297 & L298 Stepper Motor Driver
L297 L298 Stepper Motor Driver Features
- Easily adjustable motor current (0 to 2A)
- Full and Half stepping modes
- Step, Direction and Enable inputs (5V logic level)
- Synchroniseable when using multiple drivers
- Enable input can be connected to ground to disable the motor
SKU: n/a -
Modules and Motors
RFID Card 13.56MHz
RFID Card 13.56MHz Specifications:
- Frequency: 13.56MHz
- Communication Protocol: ISO 14443A/B, ISO 15693
- Chip Type: Contactless Smart Card IC (Integrated Circuit)
- Memory Capacity: Varies based on chip type and application requirements (e.g., 1KB, 4KB, or more)
- Operating Range: Standard reading distance up to 10 cm, depending on the RFID reader’s power and antenna design.
- Material: PVC or other durable materials
- Dimensions: Standard credit card size (85.6 x 53.98 mm) or customizable based on specific requirements.
- Operating Temperature: -20°C to +70°C
- Data Encryption: Advanced encryption algorithms for enhanced security
- Compatibility: Compatible with a wide range of RFID readers and devices supporting the 13.56MHz frequency.
SKU: n/a
