{"product_id":"tb6612fng-dual-dc-motor-driver-module","title":"TB6612FNG Dual DC Motor Driver Module","description":"\u003ch2\u003eTB6612FNG Dual DC Motor Driver Module\u003c\/h2\u003e\n\u003cp\u003eThe TB6612FNG dual motor driver module is a compact H-bridge driver board for controlling two brushed DC motors or one small bipolar stepper motor from a microcontroller. It is a useful upgrade from older L298N-style drivers for low-power robotics, Arduino projects, Raspberry Pi motor control, smart cars and embedded prototypes.\u003c\/p\u003e\n\u003cp\u003eThis module is intended for signal-level control and small motors. Check your motor stall current before use, because motor startup\/stall current can be much higher than the normal running current.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual H-bridge output for two bidirectional DC motors or one bipolar stepper motor.\u003c\/li\u003e\n\u003cli\u003eCompatible with 3.3 V and 5 V microcontroller logic.\u003c\/li\u003e\n\u003cli\u003ePWM speed control and direction control inputs for each motor channel.\u003c\/li\u003e\n\u003cli\u003eStandby control pin for low-power operation.\u003c\/li\u003e\n\u003cli\u003eSupports CW, CCW, short brake and stop motor control modes.\u003c\/li\u003e\n\u003cli\u003eCompact module for robotics, smart car, Arduino and Raspberry Pi projects.\u003c\/li\u003e\n\u003cli\u003eMore efficient for small motors than many older Darlington motor driver boards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Details\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDriver IC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTB6612FNG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDriver type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual H-bridge brushed DC motor driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMotor channels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 DC motors or 1 bipolar stepper motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended motor voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 V to 13.5 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLogic voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.7 V to 5.5 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAbout 1 A continuous per channel, up to 3 A peak per channel with proper cooling and short duration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl inputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAIN1, AIN2, BIN1, BIN2, PWMA, PWMB, STBY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePWM support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 100 kHz on compatible boards\/software\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThermal shutdown supported by the TB6612FNG IC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePackage contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x TB6612FNG dual motor driver module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003ch4\u003eCan this drive two DC motors?\u003c\/h4\u003e\n\u003cp\u003eYes, the TB6612FNG is a dual H-bridge driver and can control two small brushed DC motors independently.\u003c\/p\u003e\n\u003ch4\u003eCan it drive a stepper motor?\u003c\/h4\u003e\n\u003cp\u003eYes, it can drive one small bipolar stepper motor when wired and controlled correctly.\u003c\/p\u003e\n\u003ch4\u003eIs it compatible with Arduino?\u003c\/h4\u003e\n\u003cp\u003eYes, it works with Arduino boards using 5 V logic and can also work with 3.3 V controllers when powered correctly.\u003c\/p\u003e\n\u003ch4\u003eCan I use it with Raspberry Pi?\u003c\/h4\u003e\n\u003cp\u003eYes, the 2.7 V to 5.5 V logic range makes it suitable for Raspberry Pi GPIO control, with a separate motor supply and common ground.\u003c\/p\u003e\n\u003ch4\u003eWhat motor voltage should I use?\u003c\/h4\u003e\n\u003cp\u003eThe recommended motor supply range is 4.5 V to 13.5 V DC. Match the supply to your motor rating.\u003c\/p\u003e\n\u003ch4\u003eHow much current can it handle?\u003c\/h4\u003e\n\u003cp\u003eUse about 1 A continuous per channel as a practical limit. Peak current can be higher for short pulses, but overheating can damage the module.\u003c\/p\u003e\n\u003ch4\u003eWhy is the STBY pin important?\u003c\/h4\u003e\n\u003cp\u003eThe standby pin must be driven high for normal operation. If STBY is low, the driver stays disabled.\u003c\/p\u003e\n\u003ch4\u003eIs this better than L298N?\u003c\/h4\u003e\n\u003cp\u003eFor small low-voltage motors, TB6612FNG is usually more efficient and compact. For larger motors, choose a driver rated for your actual current.\u003c\/p\u003e\n\u003ch4\u003eIs it available in Pakistan?\u003c\/h4\u003e\n\u003cp\u003eYes, this TB6612FNG motor driver module is available from Embeded Studio for customers in Pakistan.\u003c\/p\u003e\n\u003ch3\u003eImportant Safety Note\u003c\/h3\u003e\n\u003cp\u003eAlways check motor stall current, wiring polarity, supply voltage and heat buildup before running the module. Do not use this board for high-current motors beyond its rating.\u003c\/p\u003e","brand":"Embeded Studio","offers":[{"title":"Default Title","offer_id":62259084231026,"sku":"ES-TB6612FNG-MOTOR-DRV","price":440.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0940\/7935\/3202\/files\/TB6612FNG.webp?v=1788026287","url":"https:\/\/embededstudio.com\/products\/tb6612fng-dual-dc-motor-driver-module","provider":"Embeded Studio","version":"1.0","type":"link"}