HW 687 Mini Motor Speed Controller DC 5A PWM
HW 687 Mini Motor Speed Controller Specifications:
Working voltage: DC 5V-25V
Output: 0-5A 90W
PWM duty cycle: 1%-100%
PWM frequency: 20KHz
Material: electronic components
Size: 30.5*26.5*13.5mm
₨150
CompareHW 687 5A Mini DC Motor PWM Speed Controller Features:
Mini-wide voltage DC motor governor, using the latest low-voltage drive technology.
With high voltage and high current self-recovery fuse.
The fuse is automatically cut off over-flow.
The fuse is automatically recovered after power failure for several seconds, almost no need to change fuse.
Adjusting the potentiometer knob can change the duty cycle of the governor and change the speed of the motor.
Suitable for water heater tune thermal, lighting dimmer, small motor speed, etc.
Descriptions:
Can not directly connect to AC.
Fine workmanship, stable performance.
Mini size, very convenient to use.
Mini Motor Speed Controller in Pakistan
DC Motor Speed Controller price in pakistan
Related products
-
-
Modules and Motors
RC522 RFID Card Reader
RC522 RFID Card Reader Features and Benefits
- Highly integrated analog circuitry to demodulate and decode responses
- Buffered output drivers for connecting an antenna with the minimum number of external components
- Supports ISO/IEC 14443 A/MIFARE and NTAG
- The typical operating distance in Read/Write mode is up to 50 mm depending on the antenna size and tuning
- Supports MF1xxS20, MF1xxS70 and MF1xxS50 encryption in Read/Write mode
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd
- Supports MFIN/MFOUT
- Additional internal power supply to the smart card IC connected via MFIN/MFOUT
- Supported host interfaces
- SPI up to 10 Mbit/s
- I 2C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on the pin voltage supply
- FIFO buffer handles 64-byte send-and-receive
- Flexible interrupt modes
- Hard reset with low power function
- Power-down by software mode
- Programmable timer
- Internal oscillator for connection to 27.12 MHz quartz crystal
- 2.5 V to 3.3 V power supply
- CRC coprocessor
- Programmable I/O pins
- Internal self-test
SKU: n/a -
Modules and Motors
GY-271 Magnetometer HMC5883L Module
GY271 Magnetometer HMC5883L Module Features:
- Gold plating PCB, applying machine welding technology, superb technique and reliable quality guarantee!
- Name: HMC5883L Module (Triaxial Magnetic Field Module);
- Type: GY-271;
- Used Chip: HMC5883L;
- Power Supply: 3~5V;
- Communication Mode: Standard IIC communicating protocol;
- Measuring Range: ±1.3-8 Gauss.
SKU: GY271-Magnetometer -
Modules and Motors
L297 & L298 Stepper Motor Driver
L297 L298 Stepper Motor Driver Features
- Easily adjustable motor current (0 to 2A)
- Full and Half stepping modes
- Step, Direction and Enable inputs (5V logic level)
- Synchroniseable when using multiple drivers
- Enable input can be connected to ground to disable the motor
SKU: n/a -
