Peltier 12707
Specifications:
- Model: TEC1-12707
- Size: 40mm x 40mm x 4mm
- Operates from 0~15.2V DC and 0~5.5A
- Operates Temperature: -30℃ to 70℃
- Max power consumption: 66Watts
- These devices must be used in conjunction with a heat sink to avoid burn-out
- Each device is full inspected and tested
- Fitted with 6-inch insulated leads
₨320
ComparePeltier 12707 Product Description:
Utilized in high-end consumer, commercial, and military-grade applications for extreme performance and maximum energy efficiency, TEC1 Peltier Modules provide unmatched temperature differentials (DTmax) in cooling or heating applications.
Hebei TEC1-12707 Peltier Modules from electron.com measure 40x40x3.5mm and offer 68˚C Delta T max (DTmax) at a maximum operating temperature of 138˚C.
Capable of performing to exacting specifications, cooling or heating with precision in extreme environments, TEC1 Peltier Modules from electron.com have rapidly become an industry standard for numerous exacting thermoelectrics.
Based on 0 reviews
Be the first to review “Peltier 12707”
You must be logged in to post a review.
Related products
-
Arduino, Modules and Motors
ZMCT103C 5A AC Current Transformer Module
ZMCT103C 5A AC Current Transformer Module Specifications:
- On-board precision micro-current transformer
- On-board high-precision op-amp circuit, to do accurate sampling and appropriate compensation and other functions to signal
- The module can measure AC within 5A, corresponding output analog can be adjusted
- Under ideal conditions, the input voltage VCC is 3-35V, according to the potentiometer (adjust the amplification ratio, amplification range 0-100 times) to adjust the required output voltage, but the output (OUT) of the maximum voltage does not exceed 1 / 2 VCC.
- The output signal is the AC voltage signal, and the output signal voltage does not exceed the maximum 1 / 2VCC.
- PCB board size: 38 (mm) x 18.5 (mm)
SKU: n/a -
Arduino, Raspberry Pi
PCA9685 16-Channel 12-bit PWM Servo Driver – I2C interface
16 Channel PWM Servo Driver 12-Bit I2C Interface – PCA9685 uses the I2C method, so only four lines can be connected to the Arduino device:
“Classic” Arduino pin mode:- + 5v -> VCC
- GND -> GND
- Analog 4 -> SDA
- Analog 5 -> SCL
- Old Mega pin way:
- + 5v -> VCC
- GND -> GND
- Digital 20 -> SDA
- Digital 21 -> SCL
SKU: 950 -
Sensors, Arduino, Modules and Motors
HC-SR505 Mini Infrared PIR Motion Sensor
HC SR505 Mini Infrared PIR Motion Sensor Specifications:
- Operating Voltage: 4.5V – 20V
- Current Consumption: <50uA (standby), <60mA (active)
- Detection Range: Up to 3 meters
- Detection Angle: 110 degrees
- Delay Time: Adjustable from 5 seconds to 300 seconds
- Trigger Method: Repeatable and Non-repeatable
- Output Signal: TTL-level (3.3V) signal
- Dimensions: 10mm x 8mm x 8mm
- Operating Temperature: -15°C to +70°C
- Housing Material: High-quality, durable plastic
SKU: n/a -
Mother Board, Arduino
CNC Shield V4 Controller Board For Arduino Nano
CNC Shield V4 Controller Board For Arduino Nano Specifications:
- Board Type: CNC Shield V4
- Microcontroller Compatibility: Arduino Nano
- Motor Driver Compatibility: A4988, DRV8825, and similar stepper motor driver modules
- Axis Control: Up to 4 axes
- Endstop Support: Yes, with connectors for limit switches and homing sensors
- PWM Control: Yes, for spindle speed and laser intensity control
- Power Supply Input: 12-36V DC
- Dimensions: Compact form factor for space-efficient installations
SKU: n/a -
Sensors, Arduino
Arduino RPM Sensor For Measuring Rotational Speed
Arduino RPM Rotational Speed Measuring Sensor Specifications:
- Operating Voltage: 5V DC
- Operating Current: <20mA
- Rotational Speed Range: 0 to 30,000 RPM
- Output Signal Types: Analog and Digital (TTL)
- Sensor Type: Non-Contact Magnetic Sensor
- Resolution: 1 RPM
- Interface: Compatible with Arduino (Analog and Digital Pins)
- Dimensions: Compact design for easy integration (specific dimensions may vary)
SKU: n/a
There are no reviews yet.