AVRISP MKII Programmer
AVRISP MKII Programmer FEATURES
- Tested and working with AVR Studio 4, AVR Studio 5, Atmel Studio 6, Atmel Studio 7
- Tested and working with Arduino and AVRDUDE after a firmware change
- Tested and working with Windows XP, Windows 7, Windows 10, Debian Linux, Ubuntu 14.04
- Connects to PC via USB type B at 2.0 Full speed
- No need for external power supply as it takes the power supply from USB
- Uses Atmel’s 2×5 pin ICSP and 2×3 pin PDI and TPI connector layout
- Works with 5V and 3.3V targets and can supply target with power (selectable)
- Programs both flash and EEPROM
- Supports fuses and lock bit programming
- Upgradeable for future device support
- Supports target voltages from 1.8V to 5.5V
- Adjustable ISP programming speed (50Hz to 8MHz SCK frequency)
- Dimensions: (45×30) mm ~ (1.7×1.2)” + 20 cm ~ 8″ cable
Compare
AVRISP MKII Programmer supports the programming of Atmel 8-bit AVR microcontrollers with ISP, PDI or TPI interfaces. Using the AVR/ATMEL Studio software, designers can program tinyAVR and megaAVR devices using the ISP Interface, tinyAVR devices using the TPI interface, and AVR XMEGA devices using the PDI Interface. The programmer also works with AVRDUDE.
AVRISP MKII Programmer in Pakistan
Based on 0 reviews
Be the first to review “AVRISP MKII Programmer”
You must be logged in to post a review.
Related products
-
Programmers and Burners
XGecu Pro T48 TL866II 3G Programmer
XGecu Pro T48 TL866-3G Parameters:
- 32-bit MCU with 120MHZ, 4-layer PCB Design, USB2.0 HS 480MHZ
- Volume: 10X6.5X2.8 cm (almost the same as TL866II)
- 16 channel ISP
Total 56-channel dedicated IO
56-channel high-speed high-voltage isolation - VCC voltage 1.8-6.5V 64 levels adjustable, VPP voltage 9V-25V 64 levels adjustable.
- Power consumption: 5V <500MA. Static power consumption: 60mA. Without external power supply interface.
- Self-test function, self-test each pin of VPP/VCC/GND/IO
- Suitable for developers and maintenance personnel, can do small batch production for high capacity chips, support simultaneously working with 4 Programmers on each computer.
- Support operating Systems: Windows XP,2003,2008, Vista Win7 WIN8 WIN10 WIN11
SKU: n/a -
Programmers and Burners
Xeltek Superpro 6100N Universal Device Programmer
Features:
- USB 2.0, Stand-alone memory,
- Compact FLASH Card,
- Power supply: AC Adapter Input AC 100V- 240V; Output 12V/1.5A,
- Dimensions: Main unit 148(L) x 216(W) x 94(H) mm,
- Package: 301(L) x 252(W) x 145(H) mm,
- Weight: Main unit Weight is 3.5 lbs (1.6 Kg),
- Package Weight: 6.2 lbs (2.8Kg)
SKU: n/a -
Programmers and Burners
Genius G540 USB Programmer
- This is Genius G540 USB universal programmer EPROM FLASH MCU GAL PIC BIOS
- SB Universal G540 EPROM FLASH MCU GAL AVR PIC Programmer
- Built-in 40-pin ZIF socket
- Is fully updatable via the software link included in the manual to the software website
- Pin contacting detection: if IC and ZIF pins fail to connect, the operation will be automatically ceased
- LED indicator light
- USB power benefits from low consumption and the unit has over-heat protection
- The sturdy, compact unit is fully portable
- G540 is the newest type of the GENIUS programmer family.
- At the lower price, G540 is still using a USB port for communication to the PC.
SKU: n/a -
Programmers and Burners
CH341A BIOS USB Programmer Mini EEPROM Flash 24 25 Series
CH341A BIOS USB Programmer Mini Features:
- USB interface with CH341A chip
- Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
- 24 or 25 status indicator lamp
- Support USB to TTL conversionSupport 24EEPROM and 25 SPI flash 8pin/ 16pin chip
- Recognize 25 series chip automatically
- Supports download STC series procedure of single chip
- SPI pin to support expanding the utility
- Support expanding the utility by SPI pin
- With SOP8 SOP16 to DIP8 converter board
- Used in wide applications – PC motherboard, LCD monitor, DVD, router program reading and writing
- Supports Windows XP, Vista, Win7 and Win8 (32/64bit) Win10 (32/64bit) system
- Provide 5V-3.3V power supply output
SKU: n/a -
Programmers and Burners
EZP2013 USB High Speed Programmer
EZP2013 USB High Speed Programmer Product Features
1. USB 2.0 interface, the speed is 12Mbps.
2. The speed of reading and writing is very fast.
3. Auto detect chip modles.
4. Auto select power votage.
6. Auto off-line chip copy.
7. Software and firmware update.
8. Surpport 25 FLASH, 24 EEPROM, 25 EEPROM, 93 EEPROM,etc.
9. Small shape.
10.Windows 2000, Windows XP, Windows Vista, Windows 7.SKU: n/a
There are no reviews yet.