Sensors, Modules and Motors
BMP280 Pressure Sensor Module
Specifications:
- Pressure Range: 300 hPa to 1100 hPa
- Pressure Accuracy: ±1.0 hPa
- Temperature Range: -40°C to +85°C
- Temperature Accuracy: ±0.5°C
- Digital Interface: I2C and SPI
- Supply Voltage: 1.8V to 3.6V
- Current Consumption: 2.7 µA at 1 Hz measurement rate
- Resolution: 0.01 hPa (Pressure), 0.01°C (Temperature)
- Dimensions: Compact and space-saving design
- Operating Modes: Normal, Forced, and Sleep mode for optimized power consumption
- Calibration Coefficients: Stored in on-chip memory for precise sensor compensation
Â
₨300
CompareFeatures
- The GY-BMP280 module comes with a BMP280 sensor, which is an environmental sensor with temperature, and barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183.
- This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI.
- This precision sensor is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuracy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter accuracy
- Pin pitch: 2.54mm
- Module size: 11.5mm*15mm
Based on 0 reviews
Be the first to review “BMP280 Pressure Sensor Module”
You must be logged in to post a review.
Related products
-
-
Modules and Motors
RFID Card 13.56MHz
RFID Card 13.56MHz Specifications:
- Frequency: 13.56MHz
- Communication Protocol: ISO 14443A/B, ISO 15693
- Chip Type: Contactless Smart Card IC (Integrated Circuit)
- Memory Capacity: Varies based on chip type and application requirements (e.g., 1KB, 4KB, or more)
- Operating Range: Standard reading distance up to 10 cm, depending on the RFID reader’s power and antenna design.
- Material: PVC or other durable materials
- Dimensions: Standard credit card size (85.6 x 53.98 mm) or customizable based on specific requirements.
- Operating Temperature: -20°C to +70°C
- Data Encryption: Advanced encryption algorithms for enhanced security
- Compatibility: Compatible with a wide range of RFID readers and devices supporting the 13.56MHz frequency.
SKU: n/a -
Modules and Motors
MG996R Servo Motor
MG996R Servo Motor Specifications:
- Weight: 55 g
- Dimensions: Approximately 40.7 x 19.7 x 42.9 mm
- Stall Torque: 9.4 kgf·cm (4.8 V), 11 kgf·cm (6 V)
- Operating Speed: 60° / 0.17s at 4.8V, 60° / 0.14s at 6V
- Operating Voltage: 4.8V – 7.2V
- Current: 500 mA
- Idle Current: 2.5 A (6V)
- Deadband Width: 5 µs
- Stable and shock-resistant dual ball bearing design
- Temperature Range: 0°C – 55°C
SKU: n/a -
-
Modules and Motors
HC06 HC09 Bluetooth Module
HC06 HC09 Bluetooth Module firmware are the modules which are factory set to be Master or Slave modules. Master and slave mode cannot be switched from the factory setting. HC-04 is an industrial grade product, HC-06 is a commercial grade product.
The modules with the HC-09 firmware are replacements for the HC-06 and HC-07 modules.
SKU: n/a
There are no reviews yet.