PAM8610 Amplifier Board Dual Channel XH-M181
Out of stock
PAM8610 Amplifier Board Specifications:
- Class D work
- Chip Type PAM8610
- Power range DC6-15V
- Recommended voltage DC12V 2A
- Dimensions 28 * 22 * 2.5
- Output power 10W * 2 (8 ohms) 15 * 2 (4 ohms)
- Frequency response 20HZ-15KHZ
- Channel type two-channel
- SNR 90db
- Weight 3g
₨200 ₨220
Out of stock
CompareThe PAM8610 amplifier board module is a 2×15W, two-channel, stereo based Class – D type Amplifier module. It can be used in any DIY or audio-related projects for cost and board space-saving purposes.
This amplifier module uses a PAM8610 driver with DC Volume Control which offers low THD+N (0.1%), low EMI, and good PSRP that is very useful for high-quality sound reproduction. The 32 steps DC volume control has a +32dB to -75dB range. The PAM8610 runs on a 7V to 15V supply. It is more efficient in terms of power than the other competitors ‘ ICs.
PAM8610 Amplifier Board price in pakistan
Based on 0 reviews
Be the first to review “PAM8610 Amplifier Board Dual Channel XH-M181”
You must be logged in to post a review.
Related products
-
Modules and Motors
RC522 RFID Card Reader
RC522 RFID Card Reader Features and Benefits
- Highly integrated analog circuitry to demodulate and decode responses
- Buffered output drivers for connecting an antenna with the minimum number of external components
- Supports ISO/IEC 14443 A/MIFARE and NTAG
- The typical operating distance in Read/Write mode is up to 50 mm depending on the antenna size and tuning
- Supports MF1xxS20, MF1xxS70 and MF1xxS50 encryption in Read/Write mode
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd
- Supports MFIN/MFOUT
- Additional internal power supply to the smart card IC connected via MFIN/MFOUT
- Supported host interfaces
- SPI up to 10 Mbit/s
- I 2C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on the pin voltage supply
- FIFO buffer handles 64-byte send-and-receive
- Flexible interrupt modes
- Hard reset with low power function
- Power-down by software mode
- Programmable timer
- Internal oscillator for connection to 27.12 MHz quartz crystal
- 2.5 V to 3.3 V power supply
- CRC coprocessor
- Programmable I/O pins
- Internal self-test
SKU: n/a -
-
-
Modules and Motors
PL2303 USB To TTL RS232 Converter Adapter Module
PL2303 USB To TTL Converter RS232 Specifications:
- Chipset: PL2303
- Interface: USB 2.0
- Voltage Levels: 3.3V or 5V selectable
- Indicators: Power and data transmission LEDs
- Compatibility: Windows, Linux, macOS
- Dimensions: Compact form factor for easy integration
- Driver Support: Included for easy installation
- Applications: Programming, debugging, and interfacing with microcontrollers and Arduino boards
SKU: n/a -
There are no reviews yet.