CAN-BUS Shield Arduino Uno
CAN BUS Shield Arduino Uno Specifications:
-
- Controller: MCP2515 CAN controller with SPI interface.
- Compatibility: Arduino Uno.
- CAN Protocol: Supports CAN 2.0B specification.
- Power Supply: 5V DC.
- Power Consumption: Low power consumption for efficient operation.
- Operating Voltage Range: Wide operating voltage range for flexibility (e.g., 3.3V to 5V).
- Indicator LEDs: Power and status LEDs for visual feedback.
- Dimensions: Compact form factor for easy integration into Arduino Uno projects.
- Operating Temperature: Suitable for a wide range of operating temperatures.
- Mounting Holes: Integrated mounting holes for secure attachment to Arduino Uno.
₨3,500
CompareThe CAN BUS Shield Arduino Uno is a powerful and versatile accessory designed to enable seamless communication between Arduino Uno microcontrollers and Controller Area Network (CAN) networks. This shield facilitates the integration of Arduino Uno boards into vehicles, industrial automation systems, and various other applications where CAN communication is crucial. With its compact design and user-friendly interface, the CAN-BUS Shield enhances the capabilities of Arduino Uno, making it an ideal choice for automotive enthusiasts, engineers, and hobbyists.
Based on 0 reviews
Be the first to review “CAN-BUS Shield Arduino Uno”
You must be logged in to post a review.
Related products
-
Arduino, Raspberry Pi
PCA9685 16-Channel 12-bit PWM Servo Driver – I2C interface
16 Channel PWM Servo Driver 12-Bit I2C Interface – PCA9685 uses the I2C method, so only four lines can be connected to the Arduino device:
“Classic” Arduino pin mode:- + 5v -> VCC
- GND -> GND
- Analog 4 -> SDA
- Analog 5 -> SCL
- Old Mega pin way:
- + 5v -> VCC
- GND -> GND
- Digital 20 -> SDA
- Digital 21 -> SCL
SKU: 950 -
Modules and Motors, Arduino
Peltier 12707
Specifications:
- Model: TEC1-12707
- Size: 40mm x 40mm x 4mm
- Operates from 0~15.2V DC and 0~5.5A
- Operates Temperature: -30℃ to 70℃
- Max power consumption: 66Watts
- These devices must be used in conjunction with a heat sink to avoid burn-out
- Each device is full inspected and tested
- Fitted with 6-inch insulated leads
SKU: n/a -
Breakout Boards, Arduino
CJMCU-9548 TCA9548A 1-8 I2C Development Board For Arduino
CJMCU-9548 TCA9548A Development Board For Arduino Specifications:
- I2C Multiplexer: TCA9548A
- Number of Channels: 8
- I2C Compatibility: 3.3V and 5V
- Voltage Supply: 2.7V to 5.5V
- Address Configuration: On-board jumpers
- LED Indicators: Yes, one per channel
- Terminal Blocks: Screw terminals for easy connection
- Dimensions: (L x W x H) 50mm x 30mm x 10mm
- Mounting Holes: Yes, standard Arduino spacing
- Operating Temperature: -40°C to 85°C
- Compatibility: Arduino Uno, Arduino Mega, and other Arduino-compatible boards
SKU: n/a -
Sensors, Arduino
ACS712 5A Range Current Sensor
ACS712 5A Range Current Sensor Specifications:
- Current Range: 0A to 5A
- Supply Voltage: 4.5V to 5.5V
- Sensitivity: 185mV/A
- Output Voltage at No Current: VCC/2
- Output Voltage at Full Current: VCC/2 ± (5%)
- Operating Temperature Range: -40°C to 85°C
- Output Voltage Offset: 2.5V (typical)
- Output Noise: 5 mV (rms, typical)
- Response Time: 5 μs (typical)
- Isolation Voltage: 2.1 kV RMS
- Dimensions: Compact form factor for easy integration
- Mounting Holes: Facilitates secure installation in various environments.
SKU: n/a -
Sensors, Arduino, Modules and Motors
HC-SR505 Mini Infrared PIR Motion Sensor
HC SR505 Mini Infrared PIR Motion Sensor Specifications:
- Operating Voltage: 4.5V – 20V
- Current Consumption: <50uA (standby), <60mA (active)
- Detection Range: Up to 3 meters
- Detection Angle: 110 degrees
- Delay Time: Adjustable from 5 seconds to 300 seconds
- Trigger Method: Repeatable and Non-repeatable
- Output Signal: TTL-level (3.3V) signal
- Dimensions: 10mm x 8mm x 8mm
- Operating Temperature: -15°C to +70°C
- Housing Material: High-quality, durable plastic
SKU: n/a
There are no reviews yet.