Tools & Instruments
SUNKKO 709A Battery Spot Welder
SUNKKO 709A Battery Spot Welder Specification:
- 1. Soldering iron part:
- 2. Temperature: 150°C ~ 450°CÂ
- 3. Power:50 WÂ Â Â Â Â Â
- 4. Output Voltage:20 V DC
- 5. Spot-welder part:
- 6. Supply Voltage: AC 220 V ± 20 V/110V
- 7. Power: 3.2 KW (Instantaneous)Â Â Â
- 8. Current: 500 AÂ Â
- 9. Electric leakage Switch Requirement: 60 A or more than 60 AÂ Â
- 10. Time of Double Pulse: 1 ~ 10 ms (adjustable)
- 11. Time of Four Pulses: 2 ~ 20 ms (adjustable)
- 12. Time of Eight Pulses: 8 ~ 80 ms (adjustable)
- 13. Welding Pin Rangee: 5 – 6 mm
- 14. Welding Pressure: 300 – 500 g
- 15. Welding Distance: Adjustable
- 16. Suitable Welding Thickness: 0.03 – 0.3 mm, Max. 0.2mm for welding pen
₨55,000
CompareSUNKKO 709A Battery Spot Welder Details
- The machine is a combination of battery spot welding and circuit board solder, which makesÂ
- your work more convenient.
- Fixed spot-welding head and mobile spot-welding pen are combined together in one machine so that the welding will become flexible.
- Possesses the function of 2,4,6,8 welding pulses selection, make the solder joint reliable.
- Possess welding current rapidd regulator, selecting the current will become quick and efficient.Â
- The anti-static soldering station which controls the temperature accurately ,it is suited for welding any integrated circuit or wiring.
- The removable footswitches can satisfy the reqirement of welding position or sophisticated technology.
- The fixed spot-welding head has pressure regulating device which makes the solder connections more reliable.
709A Battery Spot Welder price in pakistan
Related products
-
Tools & Instruments, Modules and Motors
DSO138 DIY Digital Oscilloscope Kit
DSO138 DIY Digital Oscilloscope Kit Specifications:
- Maximum real-time sampling rate: 1Msps
- Accuracy: 12Bit
- Sampling buffer depth: 1024 bytes
- Analog bandwidth: 0 – 200KHz
- Vertical sensitivity: 10mV / Div – 5V / Div (1 – 2 – 5 progressive manner)adjustable vertical displacement with instructions
- Input impedance: 1M Ohm
- Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
- Coupling modes: DC / AC / GND
- The horizontal time base range: 10 microseconds / Div – 50s / Div (1 – 2 – 5 progressive manner) 1Hz / 3.3V square wave test signal source
SKU: n/a -
Analog and Digital Converters, Tools & Instruments
USB Current Voltage Detector 3V-9V Tester Double USB Row Shows
Analog and Digital Converters, Tools & InstrumentsUSB Current Voltage Detector 3V-9V Tester Double USB Row Shows
USB Detector Current Voltage Specifications:
- Voltage Range: 3V – 9V
- Current Range: Varies based on the specific model (e.g., 0-3A)
- Display: Dual-row LED display for simultaneous monitoring of two USB ports
- Dimensions: Compact and pocket-sized for portability
- Compatibility: Works with a wide range of USB devices, including smartphones, tablets, power banks, and more
- Operating Temperature: Suitable for use in a variety of environments
- Power Source: Draws minimal power from the connected USB ports for self-operation
- Materials: Durable and lightweight materials for long-lasting use
SKU: n/a -
Tools & Instruments
UTD2102cex
Product Features
1. 100MHz bandwidth, 1GSa/s real-time sampling rate
2. 2 channels
3. 25kpts memory depth
4. 20,000wfms/s waveform acquisition rate
5. 2ns/div~50s/div time-base
6. Trigger modes: Edge, Pulse Width, Runt, Over-amplitude, Slope and Video
7. Calibration Signal Output: 10Hz, 100Hz, 1kHz (default), 10kHz and 100kHz
8. Input calibration signal only by pressing a button
9. 10Mpts waveform recording
10. 8-inch TFT LCD, WVGA (800×480)
11. USB OTG and Pass/Fail interfaces
SKU: n/a -
Tools & Instruments
NLBA1 Laptop Battery Analyzer Price in Pakistan
NLBA1 Laptop Battery Analyzer and Repair Tool Specifications:- Reads inner battery information stored inside the battery controller (even if the battery is over-discharged and the chip is not powered. The device generates an output voltage to power up the battery)
- Calculates battery health
- Detects if a chip is locked (battery not working in the laptop) or unlocked
- Detects the chip name
- Automatic pinout detection based on battery part number (more than 1000 battery part numbers in the database)
- Charges the battery with a lot of custom parameters (3.0 A maximum charging current)
- Discharges the battery with a lot of custom parameters (-3.0 A minimum discharging current)
- Track the cells voltage curves on graph during discharging
- Measures the real battery capacity
- Displays the correct voltage for each group of cells connected inside the battery (you will know exactly which cells are under discharged and how good they are)
- Calibrate / auto-cycle with many options (from time to time, laptop batteries need to have a calibration cycle 100%-0%-100% in order to display accurate battery status)
- Checks each Li-ion cell individually and displays which is GOOD, POOR or BA
SKU: n/a -
Tools & Instruments
Push Button with Cap 12x12x7.5mm
- Easy to install, good quality for long time use
- Great replacement for the old or broken buttons cap on the tactile switch
- Fits on a 12 x 12 x 7.3 mm tactile push button switch.
- Contact resistance: 50m Max (initial)
- Insulation resistance: 100 M min DC (250 V)
SKU: n/a
