IC and IC Sockets
74HC4067D SOP-24 IC
74HC4067D SOP-24 IC Features
- Wide supply voltage range from 2.0 V to 10.0 V
- Input levels S0, S1, S2, S3 and E inputs:
- For 74HC4067: CMOS level
- CMOS low power dissipation
- High noise immunity
- Low ON resistance:
- 80 Ω (typical) at VCC = 4.5 V
- 70 Ω (typical) at VCC = 6.0 V
- 60 Ω (typical) at VCC = 9.0 V
- Complies with JEDEC standards:
- JESD8C (2.7 V to 3.6 V)
- JESD7A (2.0 V to 6.0 V)
- Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
₨125
Compare74HC4067D SOP-24 IC is a single-pole 16-throw analog switch (SP16T) suitable for use in analog or digital 16:1 multiplexer/demultiplexer applications. The switch features four digital select inputs (S0, S1, S2 and S3), sixteen independent inputs/outputs (Yn), a common input/output (Z) and a digital enable input (E). When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
The 74HC4067; 74HCT4067 is a single-pole 16-throw analog switch (SP16T) suitable for use in analog or digital 16:1 multiplexer/demultiplexer applications. The switch features four digital select inputs (S0, S1, S2 and S3), sixteen independent inputs/outputs (Yn), a common input/output (Z) and a digital enable input (E). When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Related products
-
IC and IC Sockets
74HC273 SMD SOP-20 IC
74HC273 SMD SOP-20 IC Features:
- Wide Operating Voltage Range of 2 V to 6 V
- Outputs Can Drive Up to 10 LSTTL Loads
- Low Power Consumption, 80-µA Maximum ICC
- Typical tpd = 12 ns
- ±4-mA Output Drive at 5 V
- Low Input Current of 1-µA Maximum
- Contain Eight Flip-Flops With Single-Rail Outputs
- Direct Clear Input
SKU: n/a -
IC and IC Sockets
STI3408B S10B Voltage Regulator
STI3408B S10B Voltage Regulator Specifications:
- High Efficiency: Up to 96%
- 1.5MHz Constant Frequency Operation
- 1.2A Output Current
- No Schottky Diode Required
- 2.5V to 6.0V Input Voltage Range
- Output Voltage as Low as 0.6V
- 100% Duty Cycle in Dropout
- Low Quiescent Current: 40µA
- Slope Compensated Current Mode Control for Excellent Line and Load Transient Response
- Short Circuit Protection
- Thermal Fault Protection
- Inrush Current Limit and Soft Start
- Input over-voltage protection(OVP)
- <1µ A Shutdown Current
- Tiny SOT23-5 Package
“>
SKU: n/a -
IC and IC Sockets
NE555N Timer IC
NE555N Timer IC Features:
- LOW TURN-OFF TIME
- MAXIMUM OPERATING FREQUENCY GREATER THAN 500kHz
- TIMING FROM MICROSECONDS TO HOURS
- OPERATES IN BOTH ASTABLE AND MONOSTABLE MODES
- HIGH OUTPUT CURRENT CAN SOURCE OR SINK 200mA
- ADJUSTABLE DUTY CYCLE
- TTL COMPATIBLE
- TEMPERATURE STABILITY OF 0.005% PER°C
SKU: n/a -
IC and IC Sockets
Socket 8-Pin
Socket 8 Pin Specifications:
- Pin Count: 8
- Mounting Style: Through-hole or Surface Mount Device (SMD), depending on application requirements.
- Material: High-quality, durable materials to ensure mechanical strength and reliability in various operating conditions.
- Contact Material: Phosphor Bronze or Beryllium Copper for excellent electrical conductivity and resistance to corrosion.
- Contact Plating: Gold or Tin plating options to maintain a secure and low-resistance connection.
- Pitch: Standard pitch to accommodate 8-pin IC packages with precision.
- Socket Body: Robust design for mechanical stability and ease of handling during insertion and extraction of ICs.
- Socket Insulation: Insulating material to prevent short circuits and ensure electrical isolation between pins.
- Operating Temperature Range: Suitable for a wide temperature range to meet diverse application requirements.
- Current Rating: Adequate current-carrying capacity to handle the specified ICs.
- RoHS Compliance: Compliant with RoHS (Restriction of Hazardous Substances) directives for environmental safety.
- Package Dimensions: Precise dimensions to accommodate the specified 8-pin IC package size and configuration.
- Insertion and Extraction Force: Optimized for easy insertion and removal of ICs while maintaining a secure connection.
- Durability: Designed for a high number of insertion and extraction cycles to ensure long-term reliability.
- Application: Suitable for use in various electronic circuits, prototyping boards, and test setups where 8-pin ICs are employed.
- Compatibility: Compatible with a range of 8-pin ICs from different manufacturers, offering versatility in circuit designs.
SKU: n/a -
IC and IC Sockets
Socket 16-Pin
Socket 16 Pin Specifications:
- Pin Count: 16
- Package Compatibility: Designed to accommodate a variety of 16-pin IC packages, ensuring broad applicability.
- Mounting Style: Available in different configurations, including through-hole and surface mount options, to suit diverse PCB layouts.
- Material: High-quality materials chosen for durability, electrical conductivity, and resistance to environmental factors.
- Contact Material: Phosphor Bronze or Beryllium Copper, selected for optimal electrical performance and corrosion resistance.
- Contact Plating: Gold or Tin plating options to ensure a reliable and low-resistance electrical interface.
- Pitch: Standard pitch to accommodate 16-pin IC packages with precision.
- Socket Body: Robust design for mechanical strength and stability, ensuring a secure connection.
- Socket Insulation: Insulating material to prevent short circuits and ensure electrical isolation between pins.
- Operating Temperature Range: Wide temperature tolerance to meet the demands of various operating environments.
- Current Rating: Adequate current-carrying capacity to handle the specified 16-pin ICs safely.
- RoHS Compliance: Compliant with RoHS (Restriction of Hazardous Substances) directives for environmental safety.
- Package Dimensions: Precise dimensions to accommodate the specified 16-pin IC package size and configuration.
- Insertion and Extraction Force: Optimized for easy insertion and removal of 16-pin ICs while maintaining a secure connection.
- Durability: Designed for a high number of insertion and extraction cycles, ensuring long-term reliability.
- Application: Ideal for use in a wide range of electronic applications, including prototyping, testing, and development projects where frequent replacement or testing of 16-pin ICs is required.
- Compatibility: Compatible with various 16-pin ICs from different manufacturers, providing flexibility in design and component selection.
SKU: n/a
