Shop
Showing 61–75 of 663 results
-
-
-
Modules and Motors
4 Channel Solid State Relay Module SSR
5V solid state relays per channel 250V 2A, output with resistive fuse 250V 2A
4 channel 2 AMP Solid State Relay board Good for lighting- holiday displays etc
The input control signal voltage: (0-0.5V LOW solid state relay OFF) (2.5-20V high solid state relays ON)
Rated output load: 2A at 100 to 240VAC (50/60Hz)
Load voltage range: 75 to 264VAC (50/60Hz)
Load current: 0. 1 to 2 AMP
Power supply: 5VDC / 160mA (all channel ON)
Load type: General purpose
Isolation: Phototriac
Zero cross: YesSKU: n/a -
Pin Headers
40 Pin Female Header
This Break away female header connector is a Single-row, 40-pin (1×40), straight female header strip designed to match 0.1″(2.54 mm) male headers.These 0.1″ straight female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. The standard spacing is the same as on most solderless breadboards.
SKU: n/a -
Tools & Instruments
40 Watt Soldering Iron
40 Watt Soldering Iron Product Features
- Weller Consumer Soldering Iron Kits w/3 LEDs
- Three LED lights for limited application shadowing
- Round Co-molded soft grip handle design for easy tip positioning
- Triangular handle area for maximum tip control
- Stainless steel heater construction
- UL listed – cUL version available
- Excellent quality consumer iron
- IMPORTANT: Use only original Weller tips
SKU: n/a -
Sensors
41F Hall Effect Sensor SS41F
41F Hall Effect Sensor Features:
- A small, leaded, flat TO-92-style package allows for a compact PCB layout
- Wide operating voltage range of 4.5 Vdc to 24 Vdc allows these sensors to be used in a variety of applications
- Current consumption of only 5 mA max. at 4.5 Vdc for energy efficiency
- Bipolar magnetics for ring magnet applications with alternating North and South poles
- Robust design: Will operate up to 150 °C [302 °F]
- RoHS-compliant materials meet Directive 2002/95/EC
SKU: n/a -
Modules and Motors
433Mhz RF Transmitter and Receiver Module
<strong>Materials:
at first let’s take a look for what we need :
1) Â 2 Arduino Board “I used Uno”
2) RF 315MHz or 433MHz transmitter-receiver module .
3) jumper wire .
4) BreadBoard .
5)External Power supply (9V Battery *2) “Optional”
SKU: n/a -
Sensors
49E Hall Effect Sensor AH49E
49E Hall Effect Sensor AH49E Features
- Miniature Construction
- Power Consumption of 3.5mA at VCC=5V for
- Energy Efficiency
- Single Current Sourcing Output · Linear Output for Circuit Design Flexibility
- Low Noise Output Virtually Eliminates the Need for Filtering
- A Stable and Accurate Output · Temperature Range of -40oC to 85oC · Responds to Either Positive or Negative Gauss
SKU: n/a -
-
Tools & Instruments
4×4 Matrix Array 16 Key Membrane Switch Keypad
Features:
- Ultra-thin design & adhesive backing provides easy integration to any project
- Easy communication with any microcontroller
- 8 pins 2.54mm pitch connector
- Sticker can peel off for adhesive mounting
- Used widely in industrial and home electronic equipments, instrument, etc
SKU: n/a -
LCDs
5 Inch Nextion LCD NX8048T050 TFT HMI Intelligent Touch Display
5 Inch Nextion LCD NX8048T050 Specifications:
- Compatible with Raspberry Pi A+, B+ and Raspberry Pi 2, Arduino
- 800 x 480 Resolution
- RGB 65K true-to-life colours
- TFT Screen with integrated 4-wire Resistive Touch Panel For Raspberry Pi and Arduino
- Easy 4-pin interface to any TTL Serial Host For Arduino
- 16M Flash memory for User Application Code and Date
- Onboard micro-SD card for firmware upgrade
- Visual Area:108mm(L)×64.8mm(W)
- Adjustable Brightness:0~230 nit, the interval of adjustment is 1%
- 5V410mA power consumption
- CE/EMC, RoHS certified
SKU: n/a -
