board
Showing all 14 results
-
Project Boards
Breadboard
Features:
- A breadboard is a solder-less device for temporary prototypes with electronics and test circuit designs.
- Most electronic components in electronic circuits can be interconnected by inserting their leads or terminals into the holes and then making connections through wires where appropriate.
- Breadboards are one of the most fundamental pieces when learning how to build circuits.
SKU: n/a -
Breakout Boards, Arduino
CJMCU-9548 TCA9548A 1-8 I2C Development Board For Arduino
CJMCU-9548 TCA9548A Development Board For Arduino Specifications:
- I2C Multiplexer: TCA9548A
- Number of Channels: 8
- I2C Compatibility: 3.3V and 5V
- Voltage Supply: 2.7V to 5.5V
- Address Configuration: On-board jumpers
- LED Indicators: Yes, one per channel
- Terminal Blocks: Screw terminals for easy connection
- Dimensions: (L x W x H) 50mm x 30mm x 10mm
- Mounting Holes: Yes, standard Arduino spacing
- Operating Temperature: -40°C to 85°C
- Compatibility: Arduino Uno, Arduino Mega, and other Arduino-compatible boards
SKU: n/a -
Modules and Motors
L293D Motor Control Shield 4-Channel Stepper Motor Driver Board
Specifications:
- Model Number: L293D Type Drive IC
- Supply Voltage: 1.5V-6V
- Dissipation Power: 1W-6W
- Operating Temperature: -40C ~ 125C
- Lead-Free Status: Lead-free / RoHS Compliant
- Maximum Operating Temperature: -40C ~ 125C
- Size:6.8cm x 5.5cm x 2cm – 2.68inch x 2.17inch x 0.79inch.
SKU: n/a -
Modules and Motors, Other Electronics
PAM8610 Amplifier Board Dual Channel XH-M181
PAM8610 Amplifier Board Specifications:
- Class D work
- Chip Type PAM8610
- Power range DC6-15V
- Recommended voltage DC12V 2A
- Dimensions 28 * 22 * 2.5
- Output power 10W * 2 (8 ohms) 15 * 2 (4 ohms)
- Frequency response 20HZ-15KHZ
- Channel type two-channel
- SNR 90db
- Weight 3g
SKU: n/a -
STM Boards
STM32F1 Discovery Board STM32VL
STM32F1 Discovery Board Features:
- STM32F100RBT6B microcontroller, 128 KB Flash memory, 8 KB RAM in 64-pin LQFP
- On-board ST-LINK with selection mode switch to use the kit as a stand-alone ST-LINK (with SWD connector)
- Designed to be powered by USB or an external supply of 5 V or 3.3 V
- Can supply target application with 3 V and 5 V
SKU: n/a -
STM Boards
STM32F3 Discovery Board
- STM32F303VCT6 microcontroller featuring 256‑Kbyte Flash memory and 48‑Kbyte RAM in an LQFP100 package
- USB FS
- ST MEMS motion sensor, 3-axis digital output gyroscope
- ST MEMS system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor
- Ten LEDs:
- LD1 (red) for 3.3 V power on
- LD2 (red/green) for USB communication
- Eight user LEDs: LD3/10 (red), LD4/9 (blue), LD5/8 (orange) and LD6/7 (green)
- 1 user and reset push-buttons
- Board connectors:
- USB FS Mini-B connector
- ST-LINK Mini-B USB connector
- Extension header for all LQFP100 I/Os for quick connection to prototype board and easy probing
SKU: n/a -
STM Boards
STM32F429 Discovery Board
STM32F429 Discovery Board Features
- STM32F429ZIT6 microcontroller featuring 2 Mbytes of Flash memory, 256 Kbytes of RAM in an LQFP144 package
- On-board ST-LINK/V2 on STM32F429I-DISCO (old order code) or ST-LINK/V2-B on STM32F429I-DISC1 (new order code)
- mbed™ -enabled (see http://mbed.org) with the new order code only
- USB functions:
- Debug port
- Virtual COM port (with new order code only)
- Mass storage (with new order code only)
- STM32F4 Discovery – Arm Cortex M4 Processor kit in Pakistan
- Board power supply: through the USB bus or from an external 3 V or 5 V supply voltage
- 2.4″ QVGA TFT LCD
- 64-Mbit SDRAM
- L3GD20, ST-MEMS motion sensor 3-axis digital output gyroscope
SKU: n/a -
STM Boards
STM32F7 Discovery Board
STM32F7 Discovery Board Features
- STM32F746NGH6 Arm® Cortex® core-based microcontroller with 1 Mbyte of Flash memory and 340 Kbytes of RAM, in BGA216 package
- 4.3” RGB 480×272 color LCD-TFT with capacitive touchscreen
- Ethernet compliant with IEEE-802.3-2002
- USB OTG HS
- USB OTG FS
- SAI audio codec
- Two ST-MEMS digital microphones
- 128-Mbit Quad-SPI Flash memory
SKU: n/a -
STM Boards
STM32FO Discovery Board
STM32FO Discovery Board Features
- STM32F051R8T6 microcontroller featuring 64 KB Flash, 8 KB RAM in an LQFP64 package
- On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
- Board power supply: through USB bus or from an external 5 V supply voltage
- External application power supply: 3 V and 5 V
- Extension header for all LQFP64 I/Os for quick connection to prototyping board and easy probing
SKU: n/a -
STM Boards
STM8S Discovery Board
STM8S Discovery Board Features:
- STM8S105C6T6 microcontroller, 32KB flash, 2KB RAM, 1KB EEPROM
- Powered by USB cable between PC and STM8S-DISCOVERY
- Selectable power of 5V or 3.3V
- Touch sensing button, user LED, SWIM debug support
- Extension header for all I/Os
- Wrapping area for users own application
- Embedded ST-Link
- USB interface for programming and debugging
- USB interface for programming and debugging
- SWIM debug suppor
SKU: n/a -
Modules and Motors, Arduino
TF Card U Disk MP3 Format Decoder Board Module Audio Player
TF Card U Disk Decoder Module Specifications:
- Power Supply: DC 3.7V – 5V
- Audio Output: 3.5mm stereo audio jack
- Supported Audio Formats: MP3, WAV, WMA
- Storage Options: TF Card (microSD), USB flash drive
- Control Interface: Onboard buttons for play/pause, stop, volume adjustment, track selection
- Indicator LEDs: Power, playback, mode
- Dimensions: Compact form factor for easy integration into projects
- Operating Temperature: -10°C to 60°C
- Compatibility: Compatible with a wide range of microcontrollers and development boards
SKU: n/a -
Modules and Motors
WTV020SD-16P MP3 Music Module for Arduino
WTV020SD 16P MP3 Music Module Specifications:
- Voltage Input: 3.3V – 5V
- Current Consumption: <50mA
- Audio Output: 16-bit DAC
- Supported Audio Format: MP3
- Storage: MicroSD card slot (supports up to 32GB)
- Control Interface: UART (Universal Asynchronous Receiver-Transmitter)
- GPIO Pins: Yes, for external triggers
- Volume Control: Yes, Adjustable
- Dimensions: (L x W x H) 29mm x 21mm x 4mm
- Weight: <5g
SKU: n/a
