Servo
Showing all 7 results
-
Modules and Motors
MG946R Servo Motor
MG946R Servo Motor Features:
- Power: 4.8V – 6V DC max (5V works well)
- Average Speed: 60 degrees in 0.20 sec (@ 4.8V), 60 degrees in 0.16 sec (@ 6.0V)
- Weight: 62.41g
- Torque: At 4.8V: 8.5 kg-cm / 120 oz-in, and at 6V: 10 kg-cm / 140 oz-in.
- Size mm: (L x W x H) 40.7 x 19.7 x 42.9
SKU: n/a -
Modules and Motors
MG995 Metal Gear High Torque Servo
MG995 Metal Gear High Torque Servo Specifications:
- Operating Voltage: 4.8V – 7.2V
- Torque: 10kg/cm (4.8V), 13kg/cm (6V), 15kg/cm (7.2V)
- Speed: 0.20 sec/60° (4.8V), 0.16 sec/60° (6V), 0.14 sec/60° (7.2V)
- Operating Temperature Range: -10°C to 50°C
- Weight: 55g
- Dimensions: 40.7 x 19.7 x 42.9 mm
- Rotation: 360 degrees continuous
- Gear Material: Metal
- Bearing Type: Dual Ball Bearing
- Connector Type: Universal
- Compatibility: Standard servo pulse width (1,000μs to 2,000μs)
SKU: n/a -
Modules and Motors
MG996R Servo Motor
MG996R Servo Motor Specifications:
- Weight: 55 g
- Dimensions: Approximately 40.7 x 19.7 x 42.9 mm
- Stall Torque: 9.4 kgf·cm (4.8 V), 11 kgf·cm (6 V)
- Operating Speed: 60° / 0.17s at 4.8V, 60° / 0.14s at 6V
- Operating Voltage: 4.8V – 7.2V
- Current: 500 mA
- Idle Current: 2.5 A (6V)
- Deadband Width: 5 µs
- Stable and shock-resistant dual ball bearing design
- Temperature Range: 0°C – 55°C
SKU: n/a -
Modules and Motors
Multi Servo Motor Tester CCPM ESC
Servo Motor Tester CCPM ESC Specifications:
- Input Voltage: 4.8V-6.0V (Supports both 4-cell and 5-cell NiMH or NiCd battery packs)
- Servo Channels: 3 channels for independent servo testing
- ESC Compatibility: Supports a wide range of ESCs for electric motors
- Pulse Width Range: 700μs – 2300μs
- LCD Display: Backlit, easy-to-read display for real-time feedback
- Dimensions: Compact design, dimensions vary based on the specific model
- Weight: Lightweight for portability and convenience
- Safety Features: Overcurrent protection for enhanced safety during testing
SKU: n/a -
Modules and Motors
PCA9685 16 Channel 12-bit PWM I2C Servo Driver Shield for Arduino
PCA9685 PWM Servo Driver Shield Specifications
- It is controlled via I2C, with internal clock.
- It can be controlled by the Arduino 5V 3.3V or offering the safety 6V output (ideal for controlling LED white or blue with + 3.4V)
- Frequency: 40 to 1000Hz
- PWM provides 16 channels
- Supply Voltage: 2.3 V to 5.5 V
- Temperature: -40 °C to +85 °C
SKU: n/a -
Arduino, Raspberry Pi
PCA9685 16-Channel 12-bit PWM Servo Driver – I2C interface
16 Channel PWM Servo Driver 12-Bit I2C Interface – PCA9685 uses the I2C method, so only four lines can be connected to the Arduino device:
“Classic” Arduino pin mode:- + 5v -> VCC
- GND -> GND
- Analog 4 -> SDA
- Analog 5 -> SCL
- Old Mega pin way:
- + 5v -> VCC
- GND -> GND
- Digital 20 -> SDA
- Digital 21 -> SCL
SKU: 950
