ADC0804 Converter 8-Bit Analog to Digital
ADC0804 Converter 8-Bit Analog to Digital Features
- 0V to 5V analog input voltage range with a single 5V supply
- Compatible with microcontrollers, access time is 135 ns
- Easy interface to all microprocessors
- Logic inputs and outputs meet both MOS and TTL voltage level specifications
- Works with 2.5V (LM336) voltage reference
- On-chip clock generator
- No zero adjust required
- 0.3[Prime] standard width 20-pin DIP package
- Operates ratio metrically or with 5 VDC, 2.5 VDC, or analog span-adjusted voltage reference
- Differential analog voltage inputs
₨1,270
CompareADC0804 is a very commonly used 8-bit analog-to-digital converter. It works with 0V to 5V analog input voltage. It has a single analog input and 8-digital outputs. Conversion time is another major factor in judging an ADC, in ADC0804 conversion time varies depending on the clocking signals applied to CLK R and CLK IN pins, but it cannot be faster than 110 μs.
We already know that analogue-to-digital (ADCs) converters are the most widely used devices for information securing to translate the analog signals to digital numbers so microcontrollers can read them easily. There are many ADC converters like ADC0801, ADC0802, ADC0803, ADC0804 and ADC080.
“>
Based on 0 reviews
Be the first to review “ADC0804 Converter 8-Bit Analog to Digital”
You must be logged in to post a review.
Related products
-
Analog and Digital Converters
MAX488 IC
MAX488 IC Key Features
- Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
- 120µA to 500µA Quiescent Current
- Shutdown Current of 0.1µA
- Single 5V Supply Voltage
- Slew-Rate-Limited Drivers (MAX483/MAX487/MAX488 and MAX489)
- Up to 250kbps Data Rate
- Unlimited Drivers: Up to 2.5Mbps Data Rate
- Integrated Protection Enhances System Robustness
- Short Circuit Current Limited Driver
- Integrated Thermal Shutdown
- Receiver Fail-Safe for Input Open Circuit
- Guarantees Logic High
- 1/4 Unit Loading (MAX487/ MAX1487 only) Allows Up to 128 Devices on a Single Bus
- 48kΩ Receiver Input Resistance
SKU: n/a - Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
-
Analog and Digital Converters
DC 4.5-40V To 5V 2A USB Charger DC-DC Step-down Buck Converter Voltmeter Module
Analog and Digital ConvertersDC 4.5-40V To 5V 2A USB Charger DC-DC Step-down Buck Converter Voltmeter Module
DC 4.5-40V USB Charger Converter Voltmeter Module Specifications:
- Input Voltage Range: 4.5V – 40V
- Output Voltage: 5V
- Output Current: Up to 2A
- Conversion Efficiency: >90%
- Display Accuracy: ±0.1V
- Operating Temperature: -40°C to +85°C
- Dimensions: (L x W x H) 60mm x 21mm x 14mm
- Weight: 15g
- Protection: Overcurrent, Overvoltage, Short Circuit
- Connector Type: Screw terminals for input and output
- Display Type: LED Voltmeter
SKU: n/a -
Analog and Digital Converters
Max232 IC
Max232 IC Features
- RS-232 Bus-Terminal ESD Protection Exceeds
±15 kV Using Human-Body Model (HBM) - Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU V.28 Standards
- Operates With 3-V to 5.5-V VCC Supply
- Operates up to 250 kbit/s
- Two Drivers and Two Receivers
- Low Supply Current: 300 µA Typical
- External Capacitors: 4 × 0.1 µF
- Accepts 5-V Logic Input With 3.3-V Supply
- Alternative High-Speed Terminal-Compatible Devices (1 Mbit/s)
- SN65C3232 (–40°C to 85°C)
- SN75C3232 (0°C to 70°C)
SKU: Max232-Converter - RS-232 Bus-Terminal ESD Protection Exceeds
-
Analog and Digital Converters
DAC0800 Converter 8-Bit Analog to Digital
DAC0800 Converter 8-Bit Analog to Digital Features
- Fast Settling Output Current: 100 ns
- Full-Scale Error: ±1 LSB
- Nonlinearity Over Temperature: ±0.1%
- Full-Scale Current Drift: ±10 ppm/°C
- High Output Compliance: −10V to +18V
- Complementary Current Outputs
- Interface Directly with TTL, CMOS, PMOS and Others
- 2 Quadrant Wide Range Multiplying Capability
- Wide Power Supply Range: ±4.5V to ±18V
- Low Power Consumption: 33 mW at ±5V
- Low Cost
SKU: n/a -
Analog and Digital Converters
RS232 To RS485 Serial Communication Data Converter
RS232 To RS485 Converter Specifications:
- Protocol Support:
- RS232 (Recommended Standard 232)
- RS485 (Recommended Standard 485)
- Voltage Range:
- Input: 5V to 24V DC
- Output: 5V to 24V DC
- Data Rate:
- Supports configurable data rates up to [specified maximum rate] bps (bits per second).
- Operating Temperature:
- Suitable for operation in a temperature range of [specified range] degrees Celsius.
- Dimensions:
- Compact design with dimensions of [specified dimensions] for easy integration into various setups.
- Connectors:
- RS232: [Type of connector]
- RS485: [Type of connector]
- Indicators:
- Power LED: [Indicator description]
- TX LED: [Indicator description]
- RX LED: [Indicator description]
- Protection:
- Built-in surge protection to safeguard connected devices.
- Mounting:
- DIN rail mountable for easy and secure installation.
SKU: n/a - Protocol Support:
There are no reviews yet.