ADC0832 Converter 8-Bit Analog to Digital
ADC0832 Converter 8-Bit Analog to Digital Features
- NSC MICROWIRE compatible — direct interface to COPS family processors
- Easy interface to all microprocessors, or operates “stand-alone”
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required n 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible
- 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
₨200
CompareADC0832 Converter 8-Bit Analog to Digital is an 8-bit successive approximation A/D converter with serial I/O and configurable input multiplexers with up to 8 channels. The serial I/O is configured to comply with the NSC MICROWIRE™ serial data exchange standard for easy interface to the COPS™ family of processors and can interface with standard shift registers or µPs. The 2-, 4- or 8-channel multiplexers are software configured for single-ended or differential inputs as well as channel assignment. The differential analog voltage input allows increasing the common-mode rejection and offsetting the analog zero input voltage value. In addition, the voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of resolution.
Based on 0 reviews
Be the first to review “ADC0832 Converter 8-Bit Analog to Digital”
You must be logged in to post a review.
Related products
-
Analog and Digital Converters
ADC0831 Converter 8-Bit Analog to Digital
ADC0831 Converter 8-Bit Analog to Digital Features
- NSC MICROWIRE compatible — direct interface to COPS family processors
- Easy interface to all microprocessors, or operates “stand-alone”
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required
- 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible n 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
Specifications
- Resolution 8 Bits
- Total Unadjusted Error ±1⁄2 LSB and ±1 LSB
- Single Supply 5V DC
- Low Power 15 mW
- Conversion Time
SKU: n/a -
Analog and Digital Converters
DAC0800 Converter 8-Bit Analog to Digital
DAC0800 Converter 8-Bit Analog to Digital Features
- Fast Settling Output Current: 100 ns
- Full-Scale Error: ±1 LSB
- Nonlinearity Over Temperature: ±0.1%
- Full-Scale Current Drift: ±10 ppm/°C
- High Output Compliance: −10V to +18V
- Complementary Current Outputs
- Interface Directly with TTL, CMOS, PMOS and Others
- 2 Quadrant Wide Range Multiplying Capability
- Wide Power Supply Range: ±4.5V to ±18V
- Low Power Consumption: 33 mW at ±5V
- Low Cost
SKU: n/a -
-
Analog and Digital Converters
DAC0808 Converter 8-Bit Analog to Digital
DAC0808 Converter 8-Bit Analog to Digital Features:
- Part Number: DAC0808; Resolution: 8; DAC channels: 1; Interface: Parallel; Architecture: Multiplying DAC
- Output type: Unbuffered Current; Output range Max: 4.2(mA/V); Output range (Min): 0 (mA/V); Settling time: 0.15 µs
- Current Output; Relative accuracy: ±0.19% error maximum; Full-scale current match: ±1 LSB typ; Fast settling time: 150 ns typ
- Noninverting digital inputs are TTL and CMOS compatible; High speed multiplying input slew rate: 8 mA/µs; Power supply voltage range: ±4.5V to ±18V; Low power consumption: 33 mW @ ±5V; Operating temperature range: 0 ~ 70°C; Package DIP-16
- Package contains: 1 DAC0808 IC
SKU: n/a -
Analog and Digital Converters
Max487 IC
Max487 IC Key Features
- Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
- 120µA to 500µA Quiescent Current
- Shutdown Current of 0.1µA
- Single 5V Supply Voltage
- Slew-Rate-Limited Drivers (MAX483/MAX487/MAX488 and MAX489)
- Up to 250kbps Data Rate
- Unlimited Drivers: Up to 2.5Mbps Data Rate
- Integrated Protection Enhances System Robustness
- Short Circuit Current Limited Driver
- Integrated Thermal Shutdown
- Receiver Fail-Safe for Input Open Circuit
- Guarantees Logic High
- 1/4 Unit Loading (MAX487/ MAX1487 only) Allows Up to 128 Devices on a Single Bus
- 48kΩ Receiver Input Resistance
SKU: n/a - Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
There are no reviews yet.