Arduino Nano Sensor Shield I/O Expansion Board
Arduino Nano Sensor Shield I/O Expansion Board Specifications:
- Dimensions: Compatible with the Arduino NANO form factor.
- Operating Voltage: 5V DC
- Input Voltage (recommended): 7-12V
- Digital Pins: 14 (including 6 PWM outputs)
- Analog Pins: 8
- I2C Ports: 1
- SPI Ports: 1
- UART Ports: 1
- Current per I/O Pin: 20mA
- Flash Memory: 32KB (of which 2KB used by bootloader)
- SRAM: 2KB
- EEPROM: 1KB
- Clock Speed: 16MHz
3.3V output
₨500
CompareThe Arduino Nano Sensor Shield is a versatile and compact expansion board designed to enhance the capabilities of the Arduino NANO microcontroller. This shield extends the functionality of the Arduino NANO by providing additional input/output options and connectivity, making it ideal for a wide range of projects, from prototyping to more advanced applications.
Based on 0 reviews
Be the first to review “Arduino Nano Sensor Shield I/O Expansion Board”
You must be logged in to post a review.
Related products
-
Arduino
Arduino Pro Mini 328 3.3V/8MHz
Arduino Pro Mini 328 Specifications:
- ATmega328 running at 8MHz with external resonator (0.5% tolerance)
- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
- 0.8mm Thin PCB
- USB connection off board
- Weighs less than 2 grams!
- Supports auto-reset
- 3.3V regulator
- Max 150mA output
- Over current protected
- DC input 3.3V up to 12V
- On board Power and Status LEDs
- Analog Pins: 8
- Digital I/Os: 14
- 0.7×1.3″ (18x33mm)
SKU: n/a -
Arduino, Modules and Motors
ZMCT103C 5A AC Current Transformer Module
ZMCT103C 5A AC Current Transformer Module Specifications:
- On-board precision micro-current transformer
- On-board high-precision op-amp circuit, to do accurate sampling and appropriate compensation and other functions to signal
- The module can measure AC within 5A, corresponding output analog can be adjusted
- Under ideal conditions, the input voltage VCC is 3-35V, according to the potentiometer (adjust the amplification ratio, amplification range 0-100 times) to adjust the required output voltage, but the output (OUT) of the maximum voltage does not exceed 1 / 2 VCC.
- The output signal is the AC voltage signal, and the output signal voltage does not exceed the maximum 1 / 2VCC.
- PCB board size: 38 (mm) x 18.5 (mm)
SKU: n/a -
Arduino
Arduino Uno R3
Arduino Uno R3 board Specifications:
- It is an ATmega328P based Microcontroller
- The Operating Voltage of the Arduino is 5V
- The recommended input voltage ranges from 7V to 12V
- The i/p voltage (limit) is 6V to 20V
- Digital input and output pins 14
- Digital input & output pins (PWM)-6
- Analog i/p pins are 6
- DC Current for each I/O Pin is 20 mA
- DC Current used for 3.3V Pin is 50 mA
- Flash Memory -32 KB, and 0.5 KB memory is used by the boot loader
- SRAM is 2 KB
- EEPROM is 1 KB
- The speed of the CLK is 16 MHz
- In Built LED
- The length and width of the Arduino are 68.6 mm X 53.4 mm
- The weight of the Arduino board is 25 g
SKU: n/a -
Arduino, Raspberry Pi
PCA9685 16-Channel 12-bit PWM Servo Driver – I2C interface
16 Channel PWM Servo Driver 12-Bit I2C Interface – PCA9685 uses the I2C method, so only four lines can be connected to the Arduino device:
“Classic” Arduino pin mode:- + 5v -> VCC
- GND -> GND
- Analog 4 -> SDA
- Analog 5 -> SCL
- Old Mega pin way:
- + 5v -> VCC
- GND -> GND
- Digital 20 -> SDA
- Digital 21 -> SCL
SKU: 950
There are no reviews yet.