CJMCU-9548 TCA9548A 1-8 I2C Development Board For Arduino
CJMCU-9548 TCA9548A Development Board For Arduino Specifications:
- I2C Multiplexer: TCA9548A
- Number of Channels: 8
- I2C Compatibility: 3.3V and 5V
- Voltage Supply: 2.7V to 5.5V
- Address Configuration: On-board jumpers
- LED Indicators: Yes, one per channel
- Terminal Blocks: Screw terminals for easy connection
- Dimensions: (L x W x H) 50mm x 30mm x 10mm
- Mounting Holes: Yes, standard Arduino spacing
- Operating Temperature: -40°C to 85°C
- Compatibility: Arduino Uno, Arduino Mega, and other Arduino-compatible boards
₨570
CompareCJMCU-9548 TCA9548A Development Board is a versatile and efficient solution for expanding I2C communication channels on Arduino platforms. This board is equipped with the TCA9548A I2C multiplexer, allowing you to connect multiple I2C devices to a single Arduino microcontroller without compromising performance. With its user-friendly design and seamless compatibility with the Arduino ecosystem, this development board simplifies complex I2C setups and enables streamlined communication with a variety of sensors, displays, and other I2C-enabled devices.
Based on 0 reviews
Be the first to review “CJMCU-9548 TCA9548A 1-8 I2C Development Board For Arduino”
You must be logged in to post a review.
Related products
-
Arduino
OV7670 Camera Module for Arduino
OV7670 Camera Module for Arduino Specifications:
-
- Image Sensor: Omnivision OV7670
- Resolution: VGA (640×480 pixels)
- Frame Rate: Adjustable, up to 30 frames per second
- Interface: I2C
- Supply Voltage: 3.3V (Typical), 5V-tolerant I/O
- Operating Temperature: -30°C to 70°C
- Dimensions: Compact form factor for easy integration into various projects
- Lens Compatibility: Standard M12 lens mount for flexibility in lens selection
- Signal Processing: Onboard signal processing for reduced microcontroller workload
- Compatibility: Designed for use with Arduino microcontrollers
SKU: n/a -
-
Sensors, Arduino
ACS712 5A Range Current Sensor
ACS712 5A Range Current Sensor Specifications:
- Current Range: 0A to 5A
- Supply Voltage: 4.5V to 5.5V
- Sensitivity: 185mV/A
- Output Voltage at No Current: VCC/2
- Output Voltage at Full Current: VCC/2 ± (5%)
- Operating Temperature Range: -40°C to 85°C
- Output Voltage Offset: 2.5V (typical)
- Output Noise: 5 mV (rms, typical)
- Response Time: 5 μs (typical)
- Isolation Voltage: 2.1 kV RMS
- Dimensions: Compact form factor for easy integration
- Mounting Holes: Facilitates secure installation in various environments.
Â
SKU: n/a -
Sensors, Arduino
10KG Scale Load Cell Weighing Sensor +HX711 Weighing Sensors AD Module
10KG Scale Load Cell Weighing Sensor +HX711 Weighing Sensors AD Module Specifications:
- Material: Mixture
- Model Number: Load Cell
- Usage: Pressure Sensor
- Type: Acceleration Sensor
- Technical Parameters
- Range: 1一10kg
- Output sensitivity: 1.0±0.1mV/V
- Zero output: ±0.1mV/V
- Nonlinear: 0.05% F.S
- Lag: 0.05% F.S
- Repeatability: 0.05% F.S
- Creep: 0.05% F.S/3min
- Output impedance: 1000±5% ohms
- Zero temperature drift: 0.05% F.S/10°C
- Temperature sensitivity drift: 0.05% F.S/10°C
- Unit Type: piece
- Package Weight:0.035kg (0.08lb.)
- Package Size:10cm x 10cm x 2cm (3.94in x 3.94in x 0.79in)
SKU: n/a -
Modules and Motors, Arduino
W5100 Ethernet Network Module Mini For Arduino
W5100 Ethernet Network Module Specifications:
- Controller: Wiznet W5100
- Interface: SPI (Serial Peripheral Interface)
- Ethernet Speeds: 10Base-T and 100Base-TX
- MicroSD Card Slot: Yes
- Power Supply: 3.3V (via Arduino) or external power source
- Power Consumption: Low power consumption for energy-efficient operation
- Dimensions: Compact form factor for space-efficient integration
- Status LEDs: Power, Link, Full Duplex, and Speed
- Operating Temperature: -40°C to 85°C
SKU: n/a
There are no reviews yet.