ESP32 S3 Microcontroller Module
Key features include:
- Adopts ESP32-S3-WROOM-1 series module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz
- Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, options For 8MB/16MB memory
- Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance.
- Type-C connector, easier to use
- Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface
₨1,500
CompareESP32 S3 Microcontroller Module is equipped with a dual-core Xtensa 32-bit LX7 processor with 240MHz running frequency, built-in 512 KB SRAM (TCM) and 8MB PSRAM; Onboard CH343 and CH334 chips for USB and UART development via USB-C port. Compatible with the pinout of ESP32-S3-DevKitC-1 development board, more convenient to use and expand a variety of peripheral modules.
You can choose ESP-IDF, Arduino, MicroPython, or other development environments in software so that you can easily and quickly get started and apply it to the product.
This product is a compact-size microcontroller development board with multiple digital interfaces.
Adopts ESP32-S3-WROOM-1 series module, which is equipped with a dual-core Xtensa 32-bit LX7 processor with 240MHz running frequency, built-in 512 KB SRAM (TCM) and 8MB PSRAM; Onboard CH343 and CH334 chips for USB and UART development via USB-C port. Compatible with the pinout of ESP32-S3-DevKitC-1 development board, more convenient to use and expand a variety of peripheral modules.
You can choose ESP-IDF, Arduino, MicroPython, or other development environments in software so that you can easily and quickly get started and apply it to the product.
Related products
-
Micro Controllers
ATMega8 Microcontroller AVR
Applications
There are hundreds of applications for ATMEGA8.
- Industrial control systems.
- SMPS and Power Regulation Systems.
- Analog signal measuring and manipulations.
- Embedded systems like coffee machines, and vending machines.
- Motor control systems.
- Display units.
- Peripheral Interface system.
SKU: n/a -
Micro Controllers
ATMega32 Microcontroller AVR
ATMega32 Microcontroller AVR Specifications:
- Digital I/O pins:Â ATmega32 has 32 pins (4portsx8pins) configurable as Digital I/O pins.
- Timers:Â 3 Inbuilt timer/counters, two 8 bit (timer0, timer2) and one 16 bit (timer1).
- Communication Options:Â ATmega32 has three data transfer modules embedded in it. They are:
- Two Wire Interface
- USART
- Serial Peripheral Interface
“>
SKU: n/a -
Micro Controllers
PIC16F877 Microcontroller 16F877
PIC16F877 Microcontroller Features & Specifications:
- It is a 40-pin microcontroller and uses RISC architecture.
- It includes five Ports Port A, Port B, Port C, Port D & Port E.
- This microcontroller includes 3-timers where 2- 2-timers are 8-bit Timers and one is 16-bit.
- This microcontroller supports various communication protocols such as serial, I2C, and parallel.
- This PIC microcontroller supports both timer & hardware pin interrupts.
- It includes 35 smaller instruction sets.
- Its operating frequency is up to 20MHz.
- The operating voltage ranges from 4.2V to 5.5 volts.
SKU: n/a -
Micro Controllers
PIC18F46K22 Microcontroller 18F46K22
PIC18F46K22 Microcontroller Features
- C Compiler Optimized Architecture:
- Optional extended instruction set designed to optimize re-entrant code
- Up to 1024 Bytes Data EEPROM
- Up to 64 Kbytes Linear Program Memory Addressing
- Up to 3896 Bytes Linear Data Memory Addressing
- Up to 16 MIPS Operation
- 16-bit Wide Instructions, 8-bit Wide Data Path
- Priority Levels for Interrupts
- 31-Level, Software Accessible Hardware Stack
- 8 x 8 Single-Cycle Hardware Multiplier
SKU: n/a -
Micro Controllers
ATMega16 Microcontroller AVR
ATMEGA16 Microcontroller Specifications:
- Maximum voltage on any pin except RESET : -0.5V to ( Vcc + 0.5)V
- Maximum voltage on RESET pin: -0.5V to +13.0V
- Maximum DC allowed through any I/O pin: 40mA
- Maximum DC through Vcc and GND pins: 200mA
- Storage temperature:-65ºC to +150ºC
SKU: n/a
