-20%
Sensors
Light Detection Sensor Module 4-Pin
Specifications:
- Operating Voltage: 3.3V – 5V DC
- Output Type: Analog voltage
- Detection Range: 0 – 1000 Lux
- Response Time: <20ms
- Dimensions: 20mm x 15mm x 5mm
- Operating Temperature: -20°C to 85°C
- Output Pin Configuration: VCC, GND, Signal, NC (No Connection)
- Photodiode Type: Silicon NPN phototransistor
- Signal Output Voltage Range: 0V to VCC
- Applications: Automatic lighting, brightness control, smart appliances, robotics, environmental monitoring.
₨80 ₨100
The Light Detection Sensor Module 4-PIN is a versatile and efficient electronic component designed for detecting ambient light levels. This compact module is equipped with advanced photodiode technology and offers precise light sensitivity, making it an essential tool for a wide range of applications. Whether used in automatic lighting systems, smart appliances, or robotics, this sensor module ensures accurate and reliable light detection, enhancing the overall functionality of electronic projects.
Related products
-
Sensors, Arduino, Modules and Motors
DC Voltage Sensor Module for Arduino 0-25V
DC Voltage Sensor Module Arduino Specifications:
- Voltage Range: 0 to 25V DC
- Input Voltage: 5V DC (supplied by Arduino)
- Output Type: Analog Voltage
- Accuracy: ±1%
- Operating Temperature: -10°C to +70°C
- LED Indicator: Yes
- Reverse Polarity Protection: Yes
- Dimensions: (L x W x H) 2.5 cm x 1.5 cm x 0.8 cm
- Weight: 5 grams
- Interface: 3-pin header for easy connection to Arduino
SKU: n/a -
Modules and Motors, Arduino, Raspberry Pi
TM1637 LED Display Module Tube For Arduino Raspberry PI
TM1637 LED Display Module Specifications:
- Using CMOS technology
- Display mode (6-Digit 8 Segment), support a total of positive digital tube output
- Key scan (8X2bit), enhanced anti-jamming key recognition circuit
- Gray scale adjustment circuit (duty cycle 8 adjustable)
- Two-wire serial interface (CLK, DIO)
SKU: n/a -
Arduino, Raspberry Pi
PCA9685 16-Channel 12-bit PWM Servo Driver – I2C interface
16 Channel PWM Servo Driver 12-Bit I2C Interface – PCA9685 uses the I2C method, so only four lines can be connected to the Arduino device:
“Classic” Arduino pin mode:- + 5v -> VCC
- GND -> GND
- Analog 4 -> SDA
- Analog 5 -> SCL
- Old Mega pin way:
- + 5v -> VCC
- GND -> GND
- Digital 20 -> SDA
- Digital 21 -> SCL
SKU: 950 -
Modules and Motors
Bluetooth Module BLE-CC-2541
Features
- RF
- 2.4-GHz Bluetooth low energy Compliant and Proprietary RF System-on-Chip
- Supports 250-kbps, 500-kbps, 1-Mbps, 2-Mbps Data Rates
- Excellent Link Budget, Enabling Long-Range Applications Without External Front End
- Programmable Output Power up to 0 dBm
- Excellent Receiver Sensitivity (–94 dBm at 1 Mbps), Selectivity,
and Blocking Performance - Suitable for Systems Targeting Compliance With Worldwide Radio
Frequency Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe),
FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
- Layout
- Few External Components
- Reference Design Provided
- 6-mm × 6-mm QFN-40 Package
- Pin-Compatible With CC2540 (When Not Using USB or I2C)
- Low Power
- Active-Mode RX Down to: 17.9 mA
- Active-Mode TX (0 dBm): 18.2 mA
- Power Mode 1 (4-µs Wake-Up): 270 µA
- Power Mode 2 (Sleep Timer On): 1 µA
- Power Mode 3 (External Interrupts): 0.5 µA
- Wide Supply-Voltage Range (2 V–3.6 V)
- TPS62730 Compatible Low Power in Active Mode
- RX Down to: 14.7 mA (3-V supply)
- TX (0 dBm): 14.3 mA (3-V supply)
- Microcontroller
- High-Performance and Low-Power 8051 Microcontroller Core
With Code Prefetch - In-System-Programmable Flash, 128- or 256-KB
- 8-KB RAM With Retention in All Power Modes
- Hardware Debug Support
- Extensive Baseband Automation, Including Auto-Acknowledgment
and Address Decoding - Retention of All Relevant Registers in All Power Modes
- High-Performance and Low-Power 8051 Microcontroller Core
- Peripherals
- Powerful Five-Channel DMA
- General-Purpose Timers (One 16-Bit, Two 8-Bit)
- IR Generation Circuitry
- 32-kHz Sleep Timer With Capture
- Accurate Digital RSSI Support
- Battery Monitor and Temperature Sensor
- 12-Bit ADC With Eight Channels and Configurable Resolution
- AES Security Coprocessor
- Two Powerful USARTs With Support for Several Serial Protocols
- 23 General-Purpose I/O Pins
(21 × 4 mA, 2 × 20 mA) - I2C interface
- 2 I/O Pins Have LED Driving Capabilities
- Watchdog Timer
- Integrated High-PerformanceComparator
- Development Tools
- CC2541 Evaluation Module Kit (CC2541EMK)
- CC2541 Mini Development Kit (CC2541DK-MINI)
- SmartRF™ Software
- IAR Embedded Workbench™ Available
SKU: n/a - RF
-
There are no reviews yet.