MQ-5 LPG Gas Sensor
MQ5 LPG Gas Sensor Features:
- Good sensitivity to Combustible gas in a wide range
- High sensitivity to Methane, Butane and Propane
- Long life and low cost
- Simple drive circuit
Specifications:
- Detection Range: 100 – 10,000 ppm iso-butane propane
- Fast Response Time: <10s
- Heater Voltage: 5.0V
- Dimensions: 18mm Diameter, 17mm High excluding pins, Pins – 6mm High
₨225
CompareMQ5 LPG Gas Sensor is useful for gas leakage detection (in the home and industry). It is suitable for detecting H2, LPG, CH4, CO, and Alcohol. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.
MQ5 LPG Gas Sensor is useful for gas leakage detection (in the home and industry). It is suitable for detecting H2, LPG, CH4, CO, and Alcohol. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.
Based on 0 reviews
Be the first to review “MQ-5 LPG Gas Sensor”
You must be logged in to post a review.
Related products
-
Sensors
DS18B20 Temperature Sensor
DS18B20 Temperature Sensor Key Features
- Unique 1-Wire® Interface Requires Only One Port Pin for Communication
- Reduce Component Count with Integrated Temperature Sensor and EEPROM
- Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
- ±0.5°C Accuracy from -10°C to +85°C
- Programmable Resolution from 9 Bits to 12 Bits
- No External Components Required
- Parasitic Power Mode Requires Only 2 Pins for Operation (DQ and GND)
- Simplifies Distributed Temperature-Sensing Applications with Multidrop Capability
- Each Device Has a Unique 64-bit Serial Code Stored in an On-Board ROM
- Flexible User-Definable Nonvolatile (NV) Alarm Settings with Alarm Search Command Identifies Devices with Temperatures Outside Programmed Limits
- Available in 8-Pin SO (150 mils), 8-Pin µSOP, and 3-Pin TO-92 Packages
SKU: n/a -
Sensors
TCRT5000 Line Following Sensor Module
Features:
- Supply Voltage: 3.3V~5V DC
- Detection distance: 1mm – 8mm
- Digital Outputs HIGH when an object is detected
- On-board indicator LED to show the results
- On-board potentiometer to adjust the sensitivity
- On-board LM393 chip
- Usually used for line following robot
SKU: n/a -
Sensors
Water Level Sensor
Water Level Sensor Applications
- Flood and spill alarms.
- Rain barrel monitoring.
- Reservoir monitoring.
- Environmental monitoring.
- Water conservation applications.
- Mechanical float replacement.
- Electronic toilets.
- Aquaponics.
- Monitoring of Aquariums.
- Sensor for Internet of Things.
SKU: n/a
There are no reviews yet.