NE5532 is a high-performance operational amplifier combining excellent DC and AC characteristics. They feature very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection. These operational amplifiers are compensated internally for unity-gain operation. These devices have specified maximum limits for equivalent input noise voltage.
IC and IC Sockets
NE5532 SOP-8
NE5532 SOP-8 Features:
- Equivalent Input Noise Voltage:
5 nV/√Hz Typ at 1 kHz - Unity-Gain Bandwidth: 10 MHz Typ
- Common-Mode Rejection Ratio: 100 dB Typ
- High DC Voltage Gain: 100 V/mV Typ
- Peak-to-Peak Output Voltage Swing 26 V Typ With VCC± = ±15 V and RL = 600 Ω
- High Slew Rate: 9 V/μs Typ
Compare
Related products
-
IC and IC Sockets
5815M RDA5815M QFN-20 Signal IC
0 out of 5(0)5815M IC RDA5815M QFN-20 Signal IC Specifications:
- Â Single-chip RF-to-baseband Satellite receiver
- Â CMOS Fully integrated RF front end
- Â Low noise and wide dynamic range zero-IF receiver
- Â Input frequency range: 250 to 2300 MHz
- Â Input signal level: -100 to 5 dBm
- Â More than 85dB gain control range
- Â Fully integrated PLL (dividers, charge pump, phase & frequency detectors, loop filters, etc.)
- Â Integrated RX VCO
- Â Integrated baseband LPF with selectable cut-off Applications frequency from 4MHz to 40MHz with 1MHz step
- Â Integrated LNA with RF AGCÂ Integrated reference oscillator (27MHz is the default)
- Â I2C bus interface
- Â Automatic gain control
-  0.11μm RF CMOS technology
- Â 3V to 3.6V operation
- Â power consumption less than 600mW
- Â Lower profile packages:
-  RDA5815M 5×5 mm QFN32 Pin assignment (32 pin QFN 5×5 mm)
- Â Set-top boxes
- Â Digital video recorders
- Â Digital television
- Â Satellite PC-TV
SKU: n/a₨75₨120 -
IC and IC Sockets
STI3408B S10B Voltage Regulator
0 out of 5(0)STI3408B S10B Voltage Regulator Specifications:
- High Efficiency: Up to 96%
- 1.5MHz Constant Frequency Operation
- 1.2A Output Current
- No Schottky Diode Required
- 2.5V to 6.0V Input Voltage Range
- Output Voltage as Low as 0.6V
- 100% Duty Cycle in Dropout
- Low Quiescent Current: 40µA
- Slope Compensated Current Mode Control for Excellent Line and Load Transient Response
- Short Circuit Protection
- Thermal Fault Protection
- Inrush Current Limit and Soft Start
- Input over-voltage protection(OVP)
- <1µ A Shutdown Current
- Tiny SOT23-5 Package
“>
SKU: n/a -
IC and IC Sockets
LM393 SOP-8 IC
0 out of 5(0)LM393 SOP-8 IC Features:
- Wide Single-Supply Range: 2.0 Vdc to 36 Vdc
- Split-Supply Range: ±1.0 Vdc to ±18 Vdc
- Very Low Current Drain Independent of Supply Voltage: 0.4 mA
- Low Input Bias Current: 25 nA
- Low Input Offset Current: 5.0 nA
- Low Input Offset Voltage: 5.0 mV (max) LM293/393
- Input Common Mode Range to Ground Level
- Differential Input Voltage Range Equal to Power Supply Voltage
- Output Voltage Compatible with DTL, ECL, TTL, MOS, and CMOS Logic Levels
- ESD Clamps on the Inputs Increase the Ruggedness of the Device without Affecting Performance
- NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q100
- Qualified and PPAP Capable
- These Devices are Pb-Free, Halogen Free/BFR Free and RoHS Compliant
SKU: n/a₨12 – ₨25 -
IC and IC Sockets
Round Socket 14-Pin
0 out of 5(0)Round Socket 14 Pin Specifications:
- Pin Count: 14
- Package Type: Round Socket
- Material: High-quality, durable materials selected for their mechanical strength and resistance to environmental factors.
- Contact Material: Phosphor Bronze or Beryllium Copper, chosen for optimal conductivity and corrosion resistance.
- Contact Plating: Gold or Tin plating options to ensure a reliable and low-resistance electrical connection.
- Socket Body: Sturdy and ergonomic design to provide mechanical stability and ease of use.
- Socket Insulation: Insulating material to prevent short circuits and ensure electrical isolation between pins.
- Mounting Style: Designed for through-hole mounting on PCBs, ensuring a secure and stable connection.
- Pitch: Standard pitch to accommodate 14-pin IC packages with precision.
- Operating Temperature Range: Suitable for a broad temperature range to meet various environmental conditions.
- Current Rating: Adequate current-carrying capacity to handle the specified ICs.
- RoHS Compliance: Compliant with RoHS (Restriction of Hazardous Substances) directives for environmental safety.
- Package Dimensions: Precise dimensions to accommodate the specified 14-pin IC package size and configuration.
- Insertion and Extraction Force: Optimized for easy insertion and removal of ICs while maintaining a secure connection.
- Durability: Engineered for a high number of insertion and extraction cycles to ensure long-term reliability.
- Application: Well-suited for use in various electronic devices, prototyping projects, and applications where IC replacement or testing is frequent.
- Compatibility: Versatile design to accommodate a variety of 14-pin ICs from different manufacturers.
SKU: n/a