Raspberry Pi Heatsink
Raspberry Pi Heatsink Features and Specifications:
- Reduces the risk of hardware failure due to overheating
- Low profile, will fit into most cases.
- Simple, Passive cooling. No need for noisy fans.
- Perfectly sized for the RPi’s CPU
- Size 13mm x 13mm x 6mm (H x W x D)
- Thermal resistance of 27°C/W
- Self-adhesive thermal layer for easy application
₨150
CompareWe don’t have formal specs for this heat sink, but when we ran ‘stress -c 4’ on the Pi 3 to run all 4 CPUs, a heat-sink-less Pi quickly dropped down to 0.96 GHz to maintain thermal equilibrium. With this heat sink installed, it could run at 1.16GHz (so, 20% higher performance)
Note that you do not need a heatsink for the Pi 3, it will automatically adjust its speed to avoid overheating! It can also, of course, be used for other processors and chips
Raspberry Pi Heatsink Specs
- Size 13mm x 13mm x 6mm (H x W x D)
- Thermal resistance of 27°C/W
- Self-adhesive thermal layer for easy application
Based on 0 reviews
Be the first to review “Raspberry Pi Heatsink”
You must be logged in to post a review.
Related products
-
Raspberry Pi
Raspberry Pi Zero 2 W
Raspberry Pi Zero 2 W Specification
- 1GHz quad-core 64-bit Arm Cortex-A53 CPU
- 512MB SDRAM
- 2.4GHz 802.11 b/g/n wireless LAN
- Bluetooth 4.2, Bluetooth Low Energy (BLE), onboard antenna
- Mini HDMI® port and micro USB On-The-Go (OTG) port
- microSD card slot
- CSI-2 camera connector
- HAT-compatible 40-pin header footprint (unpopulated)
- H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30)
- OpenGL ES 1.1, 2.0 graphics
- Micro USB power
- Composite video and reset pins via solder test points
- 65mm x 30mm
SKU: n/a -
-
Raspberry Pi
Raspberry Pi Pico
Raspberry Pi Pico Specifications:
- RP2040 microcontroller chip
- Dual-core ARM Cortex-M0+ processor, flexible clock running up to 133 MHz
- 264 KB on-chip SRAM and 2 MB on-board Flash memory
- The castellated module allows soldering directly to carrier boards
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- USB 1.1 host and device support
- 26 GPIO ports
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × PWM channels (controllable)
- Accurate on-chip clock and timer
- Temperature sensor
- Accelerated integer and floating-point libraries on-chip
- 8 × programmable I/O (PIO) state machines for custom peripheral support
- Programming C/C++, MicroPython
- Dimensions: 21 × 51.3 × 3.9 mm
- Weight: 3 g
- Material: silicon
SKU: n/a -
Arduino, Raspberry Pi
PCA9685 16-Channel 12-bit PWM Servo Driver – I2C interface
16 Channel PWM Servo Driver 12-Bit I2C Interface – PCA9685 uses the I2C method, so only four lines can be connected to the Arduino device:
“Classic” Arduino pin mode:- + 5v -> VCC
- GND -> GND
- Analog 4 -> SDA
- Analog 5 -> SCL
- Old Mega pin way:
- + 5v -> VCC
- GND -> GND
- Digital 20 -> SDA
- Digital 21 -> SCL
SKU: 950 -
Raspberry Pi
Raspberry Pi Pico W
Raspberry Pi Pico W Features
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- Onboard Infineon CYW43439 wireless chip, supports 2.4GHz Wi-Fi
- 264KB of SRAM, and 2MB of onboard Flash memory
- Castellated module allows soldering directly to carrier boards
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: n/a
There are no reviews yet.