-4%
Modules and Motors
TB6600 Stepper Motor Driver Controller 4A 9~42V 32 Micro-Step CNC 1 Axis
Signal Input Terminal
- CP +: pulse signal input positive terminal.
- CP-: pulse signal input negative terminal.
- DIR +: the motor reverse control of the positive terminal.
- DIR-: the motor reverse control of the negative terminal.
- EN +: motor off control of the positive terminal.
- EN-: motor off control of the negative terminal.
Motor winding connection:
- A +: A + phase motor winding connection.
- A-: A- phase motor winding connection.
- B +: B + phase motor winding connection.
- B-: B- phase motor winding connection.
Operating voltage connection:
- VCC: DC power positive (Note: 10V <VCC <42V).
- GND: DC power supply negative.
₨1,350 ₨1,400
TB6600 Stepper Motor Driver Controller 4A 9~42V 32 Micro-Step CNC 1 Axis has an Input signal interface that has two configurations: the user may need to use a common anode connection or a common cathode connection.
TB6600 Stepper Motor Driver Controller Features:
This drive is an upgraded version of TB6600, heightening segments to 32 segments, for high-use segments. Applicable stepper motor: 42,57,86 type 2-phase 4-phase (4-wire line 6 line 8)
1,9V-42V DC power supply;
2, H-bridge bipolar constant phase flow drive;
3, the maximum output current of 4.0A eight optional;
4, the largest segment of the six segments 32 modes are available;
5, the input signal is high-speed optical isolation;
6, the standard common anode single-pulse interface;
7, holding off function;
8, semi-enclosed housing to accommodate more demanding environments;
9, provide energy current semi-automatic locking function;
10, built-in temperature protection and overcurrent protection.
Based on 0 reviews
Be the first to review “TB6600 Stepper Motor Driver Controller 4A 9~42V 32 Micro-Step CNC 1 Axis”
You must be logged in to post a review.
Related products
-
-
Modules and Motors
MAX6675 Module K-Type Thermocouple
MAX6675 Module Specifications:
- Thermocouple temperature range: 0 to 450oC
- Module sensor temperature range (oC): 0 to 1024
- Temperature resolution (oc): 0.25
- Module supply voltage: 3 to 5.5V
- Module current: 50mA
- Module interface: Serial (SO, SCK, CS) 16-bit SPI compatible.
- Thermocouple accuracy (0-700oC): 8 LSBs
- Thermocouple disconnect detection.
SKU: n/a -
-
Modules and Motors
HC06 HC09 Bluetooth Module
HC06 HC09 Bluetooth Module firmware are the modules which are factory set to be Master or Slave modules. Master and slave mode cannot be switched from the factory setting. HC-04 is an industrial grade product, HC-06 is a commercial grade product.
The modules with the HC-09 firmware are replacements for the HC-06 and HC-07 modules.
SKU: n/a -
There are no reviews yet.