IC and IC Sockets
TL072CP DIP-8
TL072CP Features:
- High slew rate: 20 V/µs (TL07xH, typ)
- Low offset voltage: 1 mV (TL07xH, typ)
- Low offset voltage drift: 2 µV/°C
- Low power consumption: 940 µA/ch (TL07xH, typ)
- Wide common-mode and differential voltage ranges
- Common-mode input voltage range includes V CC+
- Low input bias and offset currents
- Low noise: V n = 18 nV/√ Hz (typ) at f = 1 kHz
- Output short-circuit protection
- Low total harmonic distortion: 0.003% (typ)
- Wide supply voltage: ±2.25 V to ±20 V, 4.5 V to 40 V
Compare
TL072CP is the next-generation version of the industry-standard TL07x (TL071, TL072, and TL074) devices. These devices provide outstanding value for cost-sensitive applications, with features including low offset (1 mV, typical), high slew rate (20 V/µs), and common-mode input to the positive supply. High ESD (1.5 kV, HBM), integrated EMI and RF filters, and operation across the full –40°C to 125°C enable the TL07xH devices to be used in the most rugged and demanding applications.
Related products
-
IC and IC Sockets
LM358 SOP-8 SMD IC
LM358 SOP-8 Features:
- Wide Power Supply Range:
- – Single Supply: 3V to 32V
- –Dual Supplies: ±1.5V to ±16V
- Very Low Supply Current Drain (500μA)—Essentially Independent of Supply Voltage
- Low Input Offset Voltage: 2mV
- Large DC Voltage Gain: 100 dB
- Large Output Voltage Swing
- Input Common-Mode Voltage Range Includes Ground.
SKU: n/a -
IC and IC Sockets
ZIF Socket 48 Pin for Super Pro
ZIF Socket 48 Pin for Super Pro Specifications:
- Pin Count: 48 pins – Accommodates a wide range of ICs.
- ZIF Design: Zero Insertion Force mechanism for easy and secure handling of integrated circuits.
- Compatibility: Specifically designed for use with Super Pro programmers.
- Material: High-quality materials for durability and longevity.
- Connector Type: DIP (Dual In-line Package) for straightforward integration with programmable devices.
- Pitch: Standard 2.54mm pitch for compatibility with various IC packages.
- Locking Mechanism: Secure locking mechanism to ensure proper connection during programming.
- Operating Temperature Range: Suitable for a broad range of environmental conditions.
- Application: Ideal for programming microcontrollers, EEPROMs, and other programmable devices.
SKU: n/a -
IC and IC Sockets
5815M RDA5815M QFN-20 Signal IC
5815M IC RDA5815M QFN-20 Signal IC Specifications:
- Â Single-chip RF-to-baseband Satellite receiver
- Â CMOS Fully integrated RF front end
- Â Low noise and wide dynamic range zero-IF receiver
- Â Input frequency range: 250 to 2300 MHz
- Â Input signal level: -100 to 5 dBm
- Â More than 85dB gain control range
- Â Fully integrated PLL (dividers, charge pump, phase & frequency detectors, loop filters, etc.)
- Â Integrated RX VCO
- Â Integrated baseband LPF with selectable cut-off Applications frequency from 4MHz to 40MHz with 1MHz step
- Â Integrated LNA with RF AGCÂ Integrated reference oscillator (27MHz is the default)
- Â I2C bus interface
- Â Automatic gain control
-  0.11μm RF CMOS technology
- Â 3V to 3.6V operation
- Â power consumption less than 600mW
- Â Lower profile packages:
-  RDA5815M 5×5 mm QFN32 Pin assignment (32 pin QFN 5×5 mm)
- Â Set-top boxes
- Â Digital video recorders
- Â Digital television
- Â Satellite PC-TV
SKU: n/a -
IC and IC Sockets
74HC273 SMD SOP-20 IC
74HC273 SMD SOP-20 IC Features:
- Wide Operating Voltage Range of 2 V to 6 V
- Outputs Can Drive Up to 10 LSTTL Loads
- Low Power Consumption, 80-µA Maximum ICC
- Typical tpd = 12 ns
- ±4-mA Output Drive at 5 V
- Low Input Current of 1-µA Maximum
- Contain Eight Flip-Flops With Single-Rail Outputs
- Direct Clear Input
SKU: n/a
