XBEE Module Zigbee (S1/S2)
XBEE Module Features & Specifications:
- Indoor Range up to 100 ft. (30 m) &Â Outdoor RF line-
of- sight Range up to 300 ft. (100 m)
- Interface: Serial(UART) at 1200-
115200 bps
- Supply Voltage: 2.8 – 3.4 V
- Transmit Current (typical) 45mA (@ 3.3 V)
- Idle / Receive Current (typical) 50mA (@ 3.3 V)
- Operating Frequency:Â ISM 2.4 GHz
- Antenna: Whip antenna
- Supported Network Topologies: Point-
to- point, Point- to- multipoint & Peer- to- peer
- Number of Channels: (software selectable) 16 Direct Sequence Channels
- Addressing Options: PAN ID, Channel and Addresses
- ADC and I/O line support
- AT and API Command Modes for configuring module parameters
- Extensive command set
- Small form factor
₨2,850
CompareThe XBEE Module (S1 / S2) is a very popular ISM 2.4GHz product from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple-to-use serial command set.
S1 series modules work on  802.15.4 protocol & S2 series work on ZIGBEE protocol. You cannot mix S1 with S2.
XBee modules can give a communication range of 30 meters indoors or 100 meters outdoors. This module is ideal for  PC to Robot communication or  MCU to control other devices wirelessly.
This ZigBee wireless device can be directly connected to the serial port (at 3.3V level) of your microcontroller. By using a logic-level translator it can also be interfaced to 5V logic (TTL) devices having a serial interface. This module supports data rates of up to 115kbps. It has an indoor range of 30 meters and an outdoor RF line-
xbee Module price in pakistan
Based on 0 reviews
Be the first to review “XBEE Module Zigbee (S1/S2)”
You must be logged in to post a review.
Related products
-
Arduino
Arduino TFT Display 3.2 Inch LCD
Arduino TFT Display 3.2 Inch LCD Features:
- Support Arduino Mega2560 Directly inserted
- With a Full-angle IPS TFT panel
- OnBorad level conversion chip for 5V/3.3V MCU
- Compatible with 3.3/5 V operation voltage level
- Compatible with Arduino-Series Development Board.
- (Please notice: This Screen is not a touch screen)
- Provided 12-examples with Arduino,3-examples with STM32
- With an SD Card Socket
- With SPI FLASH circuit
Specifications:
- Driver IC: ILI9481
- Screen Size: 3.2 inch
- Display Size : 67.68(W) * 45.12(L) (mm)
- Backlight Type: Highlighting White 6 LED
- Screen Resolution: 480 * 320 Pixel (HVGA)
- Power Consumption : 80~110(mA)
- Screen Type: TFT (IPS Whole Perspective)
- Power : 5V / 3.3V
- Touch Function: None
- Data Bus: 16 Channels Parallel Bus
- Module Interface : 36Pin (Compatible with Arduino Mega2560)
- Size : 89.92(W) * 54.25(L) (mm)
SKU: n/a -
Arduino
Arduino Uno R3
Arduino Uno R3 board Specifications:
- It is an ATmega328P based Microcontroller
- The Operating Voltage of the Arduino is 5V
- The recommended input voltage ranges from 7V to 12V
- The i/p voltage (limit) is 6V to 20V
- Digital input and output pins 14
- Digital input & output pins (PWM)-6
- Analog i/p pins are 6
- DC Current for each I/O Pin is 20 mA
- DC Current used for 3.3V Pin is 50 mA
- Flash Memory -32 KB, and 0.5 KB memory is used by the boot loader
- SRAM is 2 KB
- EEPROM is 1 KB
- The speed of the CLK is 16 MHz
- In Built LED
- The length and width of the Arduino are 68.6 mm X 53.4 mm
- The weight of the Arduino board is 25 g
SKU: n/a -
Breakout Boards, Arduino
CJMCU-9548 TCA9548A 1-8 I2C Development Board For Arduino
CJMCU-9548 TCA9548A Development Board For Arduino Specifications:
- I2C Multiplexer: TCA9548A
- Number of Channels: 8
- I2C Compatibility: 3.3V and 5V
- Voltage Supply: 2.7V to 5.5V
- Address Configuration: On-board jumpers
- LED Indicators: Yes, one per channel
- Terminal Blocks: Screw terminals for easy connection
- Dimensions: (L x W x H) 50mm x 30mm x 10mm
- Mounting Holes: Yes, standard Arduino spacing
- Operating Temperature: -40°C to 85°C
- Compatibility: Arduino Uno, Arduino Mega, and other Arduino-compatible boards
SKU: n/a -
Arduino, Modules and Motors
Joystick PS2 Breakout Module
Joystick PS2 Breakout Module Specifications:
- Input Voltage: 5V DC
- Output: Analog voltage signals for X and Y axes
- Compatibility: PS2-style joysticks
- Interface: Breakout board with standard pin headers
- Dimensions: Compact size for easy integration into projects
- Operating Temperature: -20°C to 70°C
- Material: High-quality and durable components
- LED Indicators: Power and status indicators for easy troubleshooting
- Mounting Holes: Integrated mounting holes for secure attachment to surfaces or project enclosures.
SKU: n/a -
Arduino
OV7670 Camera Module for Arduino
OV7670 Camera Module for Arduino Specifications:
-
- Image Sensor: Omnivision OV7670
- Resolution: VGA (640×480 pixels)
- Frame Rate: Adjustable, up to 30 frames per second
- Interface: I2C
- Supply Voltage: 3.3V (Typical), 5V-tolerant I/O
- Operating Temperature: -30°C to 70°C
- Dimensions: Compact form factor for easy integration into various projects
- Lens Compatibility: Standard M12 lens mount for flexibility in lens selection
- Signal Processing: Onboard signal processing for reduced microcontroller workload
- Compatibility: Designed for use with Arduino microcontrollers
SKU: n/a -
There are no reviews yet.