Arduino, Modules and Motors
ZMCT103C 5A AC Current Transformer Module
ZMCT103C 5A AC Current Transformer Module Specifications:
- On-board precision micro-current transformer
- On-board high-precision op-amp circuit, to do accurate sampling and appropriate compensation and other functions to signal
- The module can measure AC within 5A, corresponding output analog can be adjusted
- Under ideal conditions, the input voltage VCC is 3-35V, according to the potentiometer (adjust the amplification ratio, amplification range 0-100 times) to adjust the required output voltage, but the output (OUT) of the maximum voltage does not exceed 1 / 2 VCC.
- The output signal is the AC voltage signal, and the output signal voltage does not exceed the maximum 1 / 2VCC.
- PCB board size: 38 (mm) x 18.5 (mm)
₨550
CompareZMCT103C 5A AC Current Transformer Module used for measurement of alternating electric currents. When the current in a circuit is too high to apply directly to measuring instruments,
a current transformer produces a reduced current accurately proportional to the current in the circuit
which can be conveniently connected to measuring and recording instruments. A current transformer isolates the measuring instruments from what may be very high voltage in the monitored circuit.
Based on 0 reviews
Be the first to review “ZMCT103C 5A AC Current Transformer Module”
You must be logged in to post a review.
Related products
-
Modules and Motors, Arduino
W5100 Ethernet Network Module Mini For Arduino
W5100 Ethernet Network Module Specifications:
- Controller: Wiznet W5100
- Interface: SPI (Serial Peripheral Interface)
- Ethernet Speeds: 10Base-T and 100Base-TX
- MicroSD Card Slot: Yes
- Power Supply: 3.3V (via Arduino) or external power source
- Power Consumption: Low power consumption for energy-efficient operation
- Dimensions: Compact form factor for space-efficient integration
- Status LEDs: Power, Link, Full Duplex, and Speed
- Operating Temperature: -40°C to 85°C
SKU: n/a -
Sensors, Arduino, Modules and Motors
801S Vibration Shock Sensor For Arduino
801S Vibration Shock Sensor For Arduino Specifications:
- Operating Voltage: 3.3V – 5V DC
- Current Consumption: <1mA
- Output Type:
- Digital Output: High/Low (TTL)
- Analog Output: 0V to Vcc (0 – 5V)
- Detection Range: Adjustable via sensitivity potentiometer
- Frequency Response: 10Hz – 10kHz
- Dimensions: 32mm x 14mm x 7mm
- Mounting Holes: Two mounting holes for easy integration into various projects.
- Operating Temperature: -10°C to +70°C
- Interface: 3-pin interface (VCC, GND, Signal)
- Compatibility: Compatible with Arduino and other microcontrollers with digital and analog input capabilities.
SKU: n/a -
Arduino
Arduino Uno R3
Arduino Uno R3 board Specifications:
- It is an ATmega328P based Microcontroller
- The Operating Voltage of the Arduino is 5V
- The recommended input voltage ranges from 7V to 12V
- The i/p voltage (limit) is 6V to 20V
- Digital input and output pins 14
- Digital input & output pins (PWM)-6
- Analog i/p pins are 6
- DC Current for each I/O Pin is 20 mA
- DC Current used for 3.3V Pin is 50 mA
- Flash Memory -32 KB, and 0.5 KB memory is used by the boot loader
- SRAM is 2 KB
- EEPROM is 1 KB
- The speed of the CLK is 16 MHz
- In Built LED
- The length and width of the Arduino are 68.6 mm X 53.4 mm
- The weight of the Arduino board is 25 g
SKU: n/a -
Arduino, Modules and Motors
Joystick PS2 Breakout Module
Joystick PS2 Breakout Module Specifications:
- Input Voltage: 5V DC
- Output: Analog voltage signals for X and Y axes
- Compatibility: PS2-style joysticks
- Interface: Breakout board with standard pin headers
- Dimensions: Compact size for easy integration into projects
- Operating Temperature: -20°C to 70°C
- Material: High-quality and durable components
- LED Indicators: Power and status indicators for easy troubleshooting
- Mounting Holes: Integrated mounting holes for secure attachment to surfaces or project enclosures.
SKU: n/a
There are no reviews yet.