W5100 Ethernet Network Module Mini For Arduino
Out of stock
W5100 Ethernet Network Module Specifications:
- Controller: Wiznet W5100
- Interface: SPI (Serial Peripheral Interface)
- Ethernet Speeds: 10Base-T and 100Base-TX
- MicroSD Card Slot: Yes
- Power Supply: 3.3V (via Arduino) or external power source
- Power Consumption: Low power consumption for energy-efficient operation
- Dimensions: Compact form factor for space-efficient integration
- Status LEDs: Power, Link, Full Duplex, and Speed
- Operating Temperature: -40°C to 85°C
₨1,400
Out of stock
CompareThe Mini W5100 Ethernet Network Module Board for Arduino is a compact and powerful networking solution designed for Arduino enthusiasts and electronic hobbyists. This module integrates the Wiznet W5100 chip, providing seamless Ethernet connectivity to Arduino-based projects. With its small form factor, the Mini W5100 module is ideal for space-constrained applications where networking capabilities are essential.
The Mini W5100 Ethernet Network Module Board for Arduino is a compact and powerful networking solution designed for Arduino enthusiasts and electronic hobbyists. This module integrates the Wiznet W5100 chip, providing seamless Ethernet connectivity to Arduino-based projects. With its small form factor, the Mini W5100 module is ideal for space-constrained applications where networking capabilities are essential.
Based on 0 reviews
Be the first to review “W5100 Ethernet Network Module Mini For Arduino”
You must be logged in to post a review.
Related products
-
Modules and Motors, Arduino
Peltier 12707
Specifications:
- Model: TEC1-12707
- Size: 40mm x 40mm x 4mm
- Operates from 0~15.2V DC and 0~5.5A
- Operates Temperature: -30℃ to 70℃
- Max power consumption: 66Watts
- These devices must be used in conjunction with a heat sink to avoid burn-out
- Each device is full inspected and tested
- Fitted with 6-inch insulated leads
SKU: n/a -
Sensors, Arduino
Arduino RPM Sensor For Measuring Rotational Speed
Arduino RPM Rotational Speed Measuring Sensor Specifications:
- Operating Voltage: 5V DC
- Operating Current: <20mA
- Rotational Speed Range: 0 to 30,000 RPM
- Output Signal Types: Analog and Digital (TTL)
- Sensor Type: Non-Contact Magnetic Sensor
- Resolution: 1 RPM
- Interface: Compatible with Arduino (Analog and Digital Pins)
- Dimensions: Compact design for easy integration (specific dimensions may vary)
SKU: n/a -
Arduino, Raspberry Pi
PCA9685 16-Channel 12-bit PWM Servo Driver – I2C interface
16 Channel PWM Servo Driver 12-Bit I2C Interface – PCA9685 uses the I2C method, so only four lines can be connected to the Arduino device:
“Classic” Arduino pin mode:- + 5v -> VCC
- GND -> GND
- Analog 4 -> SDA
- Analog 5 -> SCL
- Old Mega pin way:
- + 5v -> VCC
- GND -> GND
- Digital 20 -> SDA
- Digital 21 -> SCL
SKU: 950 -
Sensors, Arduino
10KG Scale Load Cell Weighing Sensor +HX711 Weighing Sensors AD Module
10KG Scale Load Cell Weighing Sensor +HX711 Weighing Sensors AD Module Specifications:
- Material: Mixture
- Model Number: Load Cell
- Usage: Pressure Sensor
- Type: Acceleration Sensor
- Technical Parameters
- Range: 1一10kg
- Output sensitivity: 1.0±0.1mV/V
- Zero output: ±0.1mV/V
- Nonlinear: 0.05% F.S
- Lag: 0.05% F.S
- Repeatability: 0.05% F.S
- Creep: 0.05% F.S/3min
- Output impedance: 1000±5% ohms
- Zero temperature drift: 0.05% F.S/10°C
- Temperature sensitivity drift: 0.05% F.S/10°C
- Unit Type: piece
- Package Weight:0.035kg (0.08lb.)
- Package Size:10cm x 10cm x 2cm (3.94in x 3.94in x 0.79in)
SKU: n/a -
Mother Board, Arduino
CNC Shield V4 Controller Board For Arduino Nano
CNC Shield V4 Controller Board For Arduino Nano Specifications:
- Board Type: CNC Shield V4
- Microcontroller Compatibility: Arduino Nano
- Motor Driver Compatibility: A4988, DRV8825, and similar stepper motor driver modules
- Axis Control: Up to 4 axes
- Endstop Support: Yes, with connectors for limit switches and homing sensors
- PWM Control: Yes, for spindle speed and laser intensity control
- Power Supply Input: 12-36V DC
- Dimensions: Compact form factor for space-efficient installations
SKU: n/a
There are no reviews yet.