Arduino Leonardo is Arduino’s first development board to use one microcontroller with built-in USB. Using the ATmega32U4 as its sole microcontroller allows it to be cheaper and simpler. Also, because the 32U4 is handling the USB directly, code libraries are available which allow the board to emulate a computer keyboard, mouse, and more using the USB-HID protocol!
It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
Arduino Leonardo price in Pakistan
Based on 0 reviews
Be the first to review “Arduino Leonardo”
You must be logged in to post a review.
Related products
-
Modules and Motors, Arduino
W5100 Ethernet Network Module Mini For Arduino
W5100 Ethernet Network Module Specifications:
- Controller: Wiznet W5100
- Interface: SPI (Serial Peripheral Interface)
- Ethernet Speeds: 10Base-T and 100Base-TX
- MicroSD Card Slot: Yes
- Power Supply: 3.3V (via Arduino) or external power source
- Power Consumption: Low power consumption for energy-efficient operation
- Dimensions: Compact form factor for space-efficient integration
- Status LEDs: Power, Link, Full Duplex, and Speed
- Operating Temperature: -40°C to 85°C
SKU: n/a -
Sensors, Arduino, Modules and Motors
HC-SR505 Mini Infrared PIR Motion Sensor
HC SR505 Mini Infrared PIR Motion Sensor Specifications:
- Operating Voltage: 4.5V – 20V
- Current Consumption: <50uA (standby), <60mA (active)
- Detection Range: Up to 3 meters
- Detection Angle: 110 degrees
- Delay Time: Adjustable from 5 seconds to 300 seconds
- Trigger Method: Repeatable and Non-repeatable
- Output Signal: TTL-level (3.3V) signal
- Dimensions: 10mm x 8mm x 8mm
- Operating Temperature: -15°C to +70°C
- Housing Material: High-quality, durable plastic
SKU: n/a -
Modules and Motors, Arduino
ZMPT101B 250V AC Voltage Sensor Module For Arduino
Specifications:
- Measure within 250V AC
- Onboard micro-precision voltage transformer
- Analog output corresponding quantity can be adjusted.
- Good consistency, for voltage and power measurement
- Very efficient and accuracy
SKU: n/a -
Modules and Motors, Arduino
TF Card U Disk MP3 Format Decoder Board Module Audio Player
TF Card U Disk Decoder Module Specifications:
- Power Supply: DC 3.7V – 5V
- Audio Output: 3.5mm stereo audio jack
- Supported Audio Formats: MP3, WAV, WMA
- Storage Options: TF Card (microSD), USB flash drive
- Control Interface: Onboard buttons for play/pause, stop, volume adjustment, track selection
- Indicator LEDs: Power, playback, mode
- Dimensions: Compact form factor for easy integration into projects
- Operating Temperature: -10°C to 60°C
- Compatibility: Compatible with a wide range of microcontrollers and development boards
SKU: n/a -
Sensors, Arduino
10KG Scale Load Cell Weighing Sensor +HX711 Weighing Sensors AD Module
10KG Scale Load Cell Weighing Sensor +HX711 Weighing Sensors AD Module Specifications:
- Material: Mixture
- Model Number: Load Cell
- Usage: Pressure Sensor
- Type: Acceleration Sensor
- Technical Parameters
- Range: 1一10kg
- Output sensitivity: 1.0±0.1mV/V
- Zero output: ±0.1mV/V
- Nonlinear: 0.05% F.S
- Lag: 0.05% F.S
- Repeatability: 0.05% F.S
- Creep: 0.05% F.S/3min
- Output impedance: 1000±5% ohms
- Zero temperature drift: 0.05% F.S/10°C
- Temperature sensitivity drift: 0.05% F.S/10°C
- Unit Type: piece
- Package Weight:0.035kg (0.08lb.)
- Package Size:10cm x 10cm x 2cm (3.94in x 3.94in x 0.79in)
SKU: n/a
There are no reviews yet.