LM35 Waterproof Temperature Sensor
LM35 Waterproof Temperature Sensor Specifications:
- Directly Celsius temperature calibration;
- Linear :+ 10.0mV / ℃;
- Ensure the accuracy : 0.5 ℃ (at + 25 ℃ when);
- Temperature range : 0 ℃ ~ 100 ℃
- Direct output voltage signal;
- Internally precision fine-tuning;
- Wide supply voltage:4 ~ 30V;
- Operating current: Less than 60μA;
- Low self-heating, in still air 0.1 ℃;
- Only non-linear value ± 1/4 ℃ of;
- Low-impedance output, 0.1Ω at 1mA load
₨300
CompareLM35 Waterproof Temperature Sensor probe lets you precisely measure temperatures in wet environments. The LM35 are precision integrated-circuit temperature sensors, with an output voltage linearly proportional to the Centigrade temperature.
LM35 is a precession Integrated circuit Temperature sensor, whose output voltage varies, based on the temperature around it. It is a small and cheap IC which can be used to measure temperatures anywhere between -55°C to 150°C. It can easily be interfaced with any Microcontroller that has ADC function or any development platform like Arduino.
Dimensions: The probe is 6mm in diameter and roughly 30mm long. The overall length (including wire) is 6 feet.
Based on 0 reviews
Be the first to review “LM35 Waterproof Temperature Sensor”
You must be logged in to post a review.
Related products
-
Sensors
Water Quality Sensor pH Sensor
Water Quality Sensor Features
Use the pH Sensor just as you would a traditional pH meter with the additional advantages of automated data collection, graphing, and data analysis. Typical activities using our pH sensor include:
- Acid-base titrations
- Studies of household acids and bases
- Monitoring pH change during chemical reactions or in an aquarium as a result of photosynthesis
- Investigations of acid rain and buffering
- Analysis of water quality in streams and lakes
SKU: n/a -
Sensors
DHT21 Sensor Temperature and Humidity Module
DHT21 Sensor Specification:Â
- Model: AM2301
- Power supply: 3.3-5V DC
- Output signal: digital signal via single-bus
- Sensing element: Polymer humidity capacitor
- Measuring range: humidity 0-100%RH; temperature -40~80Celsius
- Accuracy: humidity +-3%RH(Max +-5%RH); temperature <+-1Celsius
- Resolution or sensitivity: humidity 0.1%RH; temperature 0.1Celsius
- Repeatability: humidity +-1%RH; temperature +-0.2Celsius
- Humidity hysteresis: +-0.3%RH
- Long-term Stability: +-0.5%RH/year
- Sensing period: Average: 2s
- Dimensions size 59*27*13.5mm
SKU: dht21-sensor -
Sensors
TCRT5000 Line Following Sensor Module
Features:Â
- Supply Voltage: 3.3V~5V DC
- Detection distance: 1mm – 8mm
- Digital Outputs HIGH when an object is detected
- On-board indicator LED to show the results
- On-board potentiometer to adjust the sensitivity
- On-board LM393 chip
- Usually used for line following robot
SKU: n/a
There are no reviews yet.