Modules and Motors
Multi Servo Motor Tester CCPM ESC
Servo Motor Tester CCPM ESC Specifications:
- Input Voltage: 4.8V-6.0V (Supports both 4-cell and 5-cell NiMH or NiCd battery packs)
- Servo Channels: 3 channels for independent servo testing
- ESC Compatibility: Supports a wide range of ESCs for electric motors
- Pulse Width Range: 700μs – 2300μs
- LCD Display: Backlit, easy-to-read display for real-time feedback
- Dimensions: Compact design, dimensions vary based on the specific model
- Weight: Lightweight for portability and convenience
- Safety Features: Overcurrent protection for enhanced safety during testing
₨350
CompareThe Servo Motor Tester CCPM ESC is a versatile and essential tool for enthusiasts, hobbyists, and professionals working with remote-controlled vehicles and robotic systems. Designed to facilitate precise calibration and testing of servo motors and electronic speed controllers (ESCs), this compact device ensures optimal performance and reliability for your mechanical and electronic components.
Based on 0 reviews
Be the first to review “Multi Servo Motor Tester CCPM ESC”
You must be logged in to post a review.
Related products
-
Modules and Motors
ESP-01 ESP8266 WiFi Module
ESP 01 WiFi Module ESP8266 Features
- 802.11 b/g/n protocol
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, and power management units
- +19.5dBm output power in 802.11b mode
- Integrated temperature sensor
- Supports antenna diversity
- Power down leakage current of < 10uA
- Integrated low power 32-bit CPU could be used as application processor
- SDIO 2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4s guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: ESP-01-ESP8266-WiFi-Module -
-
Modules and Motors
MAX6675 Module K-Type Thermocouple
MAX6675 Module Specifications:
- Thermocouple temperature range: 0 to 450oC
- Module sensor temperature range (oC): 0 to 1024
- Temperature resolution (oc): 0.25
- Module supply voltage: 3 to 5.5V
- Module current: 50mA
- Module interface: Serial (SO, SCK, CS) 16-bit SPI compatible.
- Thermocouple accuracy (0-700oC): 8 LSBs
- Thermocouple disconnect detection.
SKU: n/a -
Modules and Motors
Bluetooth Module BLE-CC-2541
Features
- RF
- 2.4-GHz Bluetooth low energy Compliant and Proprietary RF System-on-Chip
- Supports 250-kbps, 500-kbps, 1-Mbps, 2-Mbps Data Rates
- Excellent Link Budget, Enabling Long-Range Applications Without External Front End
- Programmable Output Power up to 0 dBm
- Excellent Receiver Sensitivity (–94 dBm at 1 Mbps), Selectivity,
and Blocking Performance - Suitable for Systems Targeting Compliance With Worldwide Radio
Frequency Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe),
FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
- Layout
- Few External Components
- Reference Design Provided
- 6-mm × 6-mm QFN-40 Package
- Pin-Compatible With CC2540 (When Not Using USB or I2C)
- Low Power
- Active-Mode RX Down to: 17.9 mA
- Active-Mode TX (0 dBm): 18.2 mA
- Power Mode 1 (4-µs Wake-Up): 270 µA
- Power Mode 2 (Sleep Timer On): 1 µA
- Power Mode 3 (External Interrupts): 0.5 µA
- Wide Supply-Voltage Range (2 V–3.6 V)
- TPS62730 Compatible Low Power in Active Mode
- RX Down to: 14.7 mA (3-V supply)
- TX (0 dBm): 14.3 mA (3-V supply)
- Microcontroller
- High-Performance and Low-Power 8051 Microcontroller Core
With Code Prefetch - In-System-Programmable Flash, 128- or 256-KB
- 8-KB RAM With Retention in All Power Modes
- Hardware Debug Support
- Extensive Baseband Automation, Including Auto-Acknowledgment
and Address Decoding - Retention of All Relevant Registers in All Power Modes
- High-Performance and Low-Power 8051 Microcontroller Core
- Peripherals
- Powerful Five-Channel DMA
- General-Purpose Timers (One 16-Bit, Two 8-Bit)
- IR Generation Circuitry
- 32-kHz Sleep Timer With Capture
- Accurate Digital RSSI Support
- Battery Monitor and Temperature Sensor
- 12-Bit ADC With Eight Channels and Configurable Resolution
- AES Security Coprocessor
- Two Powerful USARTs With Support for Several Serial Protocols
- 23 General-Purpose I/O Pins
(21 × 4 mA, 2 × 20 mA) - I2C interface
- 2 I/O Pins Have LED Driving Capabilities
- Watchdog Timer
- Integrated High-PerformanceComparator
- Development Tools
- CC2541 Evaluation Module Kit (CC2541EMK)
- CC2541 Mini Development Kit (CC2541DK-MINI)
- SmartRF™ Software
- IAR Embedded Workbench™ Available
SKU: n/a - RF
-
There are no reviews yet.