IR2104 IC DIP8 IR2104S SOP8 Driver
Features and Specifications
- Floating channel designed for bootstrap operation
- Fully operational to +600V
- Tolerant to negative transient voltage
- dV/dt immune
- Gate drive supply ranges from 10 to 20V
- Undervoltage lockout
- 3.3V, 5V, and 15V input logic compatible
- Cross-conduction prevention logic
- Internally set deadtime
- High-side output in phase with the input
- Shut down input turns off both channels
- Matched propagation delay for both channels
₨200 – ₨240
CompareThe IR2104 IC is a high-speed Half-Bridge gate driver chip that accepts low-power input to output high-power current drives. It can be used to drive high-power switching devices like MOSFETs and IGBTs and both high- and low-side MOSFETs. The IR2104 IC has a typical source current of 0.21A and a sink current of 0.36A. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic.
The IR2104S SOP IC-8 Gate Driver is a high voltage, high-speed power MOSFET and IGBT driver with dependent high and low side referenced output channels. Proprietary HVIC and latch-immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic.
The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high-side configuration which operates from 10 to 600 volts.
IR2104 IC price in pakistan
IR2104s IC price in pakistan
| Version | IR2104, IR2104S SOP |
|---|
Related products
-
MOSFETs, IGBTs and BJTs
IR2101 IC DIP8 IR2101S SOP8 Driver
Features:
- Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dV/dt immune
- Gate drive supply ranges from 10 to 20V
- Undervoltage lockout
- 3.3V, 5V, and 15V logic input compatible
- Matched propagation delay for both channels
- Outputs in phase with inputs (IR2101) or out of phase with inputs (IR2102
SKU: n/a -
MOSFETs, IGBTs and BJTs, ICs and Optocouplers
A3120 IC HCPL3120 DIP8 SOP8 Driver
Features:
- 2.0 A Minimum Peak Output Current
- 15 kV/µs Minimum Common Mode Rejection (CMR) at VCM = 1500 V
- 0.5 V Maximum Low-Level Output Voltage (VOL) Eliminates the Need for a Negative Gate Drive
- ICC = 5 mA Maximum Supply Current
- Under Voltage Lock-Out Protection (UVLO) with Hysteresis
- Wide Operating VCC Range: 15 to 30 Volts
- 500 ns Maximum Switching Speeds
- Industrial Temperature Range : -40°C to 100°C
SKU: n/a -
MOSFETs, IGBTs and BJTs
IR2106 IC DIP8 IR2106S SOP8 Driver
Features- Floating channel designed for bootstrap operation
- Fully operational to +600 V
- Tolerant to negative transient voltage
- dV/dt immune
- Gate drive supply range from 10 to 20 V
- Undervoltage lockout
- 3.3 V, 5 V, and 15 V logic input compatible
- Matched propagation delay for both channels
- Logic and power ground + /- 5 V offset
- Lower di/dt gate driver for better noise immunity
- Outputs in phase with inputs
SKU: n/a -
MOSFETs, IGBTs and BJTs
IR2110 IC DIP14 IR2110S SOP16 Driver
IR2110 IC/IR2110S IC Features- Floating channel designed for bootstrap operation
- Fully operational to +500 V
- Fully operational to +600 V version available (IR2113)
- dV/dt immune
- Gate drive supply ranges from 10 to 20 V
- Undervoltage lockout for both channels
- 3.3 V logic compatible
- Separate logic supply range from 3.3 V to 20 V
- Logic and power ground + /- 5 V offset
- CMOS Schmitt-triggered inputs with pull-down
- Cycle-by-cycle edge-triggered shutdown logic
- Matched propagation delay for both channels
- Outputs in phase with inputs
SKU: n/a -
ICs and Optocouplers, MOSFETs, IGBTs and BJTs
TLP250 IC DIP8 TLP250S SOP8 Driver
Features:
- Input threshold current: IF = 5mA (max.)
- Supply current: 11mA (max.)
- Supply voltage: 10~35V
- Output current: ±1.5A (max.)
- Switching time: tpHL, tpLH = 0.5μs (max.)
- Isolation voltage: 2500 Vrms (min.)
- UL recognized: UL1577, file no. E67349
- Option (D4) type
- VDE approved: DIN EN 60747-5-2, certificate No. 40011913
- Maximum operating insulation voltage: 1140VPK
- Highest permissible over voltage: 6000VPK
“>
SKU: n/a
