IR21365S IC SOP28 MOSFET Driver
IR21365S IC Features
- Floating channel designed for bootstrap operation
- Fully operational to +600V
- Tolerant to negative transient voltage
- – dV/dt immune
- Gate drive supply range from (IR21363/IR21365/ IR21366/IR21367)
- Undervoltage lockout for all channel
- ls 28-Lead SOIC
- Over-current shutdown turns off all six drivers
- Independent 3 half-bridge drivers 28-Lead
- PDIP Matched propagation delay for all channels
- Cross-conduction prevention logic
- 44-Lead PLCC w/o 12 leads
- Lowside outputs out of phase with inputs.
₨550
CompareThe IR21365S IC is a high voltage, high-speed power MOSFET and IGBT driver with three independent high and low side referenced output channels for 3-phase applications. Proprietary HVIC technology enables ruggedized monolithic construction.
Logic inputs are compatible with CMOS or LSTTL outputs, down to 3.3V logic. A current trip function which terminates all six outputs can be derived from an external current sense resistor. An enable function is available to terminate all six outputs simultaneously.
An open-drain FAULT signal is provided to indicate that an overcurrent or undervoltage shutdown has occurred. Overcurrent fault conditions are cleared automatically after a delay programmed externally via an RC network connected to the RCIN input.
Related products
-
MOSFETs, IGBTs and BJTs
IR2186S IC SOP8 MOSFET Driver
IR2186S IC Features
- Floating channel designed for bootstrap operation
- Fully operational to +600 V
- Tolerant to negative transient voltage
- dV/dt immune
- Gate drive supply ranges from 10 V to 20 V
- Undervoltage lockout for both channels
- 3.3 V and 5 V logic compatible
- Matched propagation delay for both channels
- Logic and power ground +/- 5 V offset
- Lower di/dt gate driver for better noise immunity
- Output source/sink current 4 A / 4 A
- RoHS compliant
SKU: n/a -
MOSFETs, IGBTs and BJTs
IR2109 IC DIP8 IR2109S SOP8 Driver
Features- Floating channel designed for bootstrap operation
- Fully operational to +600 V
- Tolerant to negative transient voltage
- dV/dt immune
- Gate drive supply range from 10 to 20 V
- Undervoltage lockout for both channels
- 3.3 V, 5 V, and 15 V logic input compatible
- Cross-conduction prevention logic
- Matched propagation delay for both channels
- High side output in phase with IN input
- Logic and power ground + /- 5 V offset
- Internal 540ns dead-time
- Lower di/dt gate driver for better noise immunity
- Shut down input turns off both channels
SKU: n/a -
MOSFETs, IGBTs and BJTs
K75T60 IGBT IKW75N60T 600V 75A
K75T60 IGBT Features and Specifications:
- Very low VCE (sat) 1.5V (typ.)
- Maximum Junction Temperature of 175℃
- Short circuit withstand time 5micro seconds
- Positive temperature coefficient in VCE (sat)
- Very tight parameter distribution
- High ruggedness, temperature-stable behavior
- Very high switching speed
- Low Electro Magnetic Interference
- Very soft and fast recovery anti-parallel Emitter Controlled HE diode
- Pb-free lead plating
- RoHS compliant
SKU: n/a -
ICs and Optocouplers, MOSFETs, IGBTs and BJTs
TLP250 IC DIP8 TLP250S SOP8 Driver
Features:
- Input threshold current: IF = 5mA (max.)
- Supply current: 11mA (max.)
- Supply voltage: 10~35V
- Output current: ±1.5A (max.)
- Switching time: tpHL, tpLH = 0.5μs (max.)
- Isolation voltage: 2500 Vrms (min.)
- UL recognized: UL1577, file no. E67349
- Option (D4) type
- VDE approved: DIN EN 60747-5-2, certificate No. 40011913
- Maximum operating insulation voltage: 1140VPK
- Highest permissible over voltage: 6000VPK
“>
SKU: n/a -
MOSFETs, IGBTs and BJTs
IR2101 IC DIP8 IR2101S SOP8 Driver
Features:
- Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dV/dt immune
- Gate drive supply ranges from 10 to 20V
- Undervoltage lockout
- 3.3V, 5V, and 15V logic input compatible
- Matched propagation delay for both channels
- Outputs in phase with inputs (IR2101) or out of phase with inputs (IR2102
SKU: n/a
