TLP250 IC DIP8 TLP250S SOP8 Driver
Features:
- Input threshold current: IF = 5mA (max.)
- Supply current: 11mA (max.)
- Supply voltage: 10~35V
- Output current: ±1.5A (max.)
- Switching time: tpHL, tpLH = 0.5μs (max.)
- Isolation voltage: 2500 Vrms (min.)
- UL recognized: UL1577, file no. E67349
- Option (D4) type
- VDE approved: DIN EN 60747-5-2, certificate No. 40011913
- Maximum operating insulation voltage: 1140VPK
- Highest permissible over voltage: 6000VPK
“>
₨90 – ₨245
CompareThe TLP250 IC / TLP250S IC is an 8-pin photocoupler designed exclusively for use in IGBT (isolated-gate bipolar transistor) drive applications. These photocouplers are capable of driving the gates of IGBTs and power MOSFETs.
The pin layout of the TLP250 IC is given below. It is clearly shown in the figure that the LED at the input stage and the photodetector diode at the output stage are used to provide isolation between the input and output.
PIN 1 and 4 are not connected to any point. Hence they are not in use. Pin 2 is the anode point of the input stage light-emitting diode and pin 3 is the cathode point of the input stage. Input is provided to PINs 2 and 3. PIN 8 is for supply connection. PIN 5 is for the ground power supply.
tlp250 ic price in pakistan
tlp250s ic price in pakistan
| Version | TLP250F DIP (New), TLP250F DIP (Refurbished), TLP250S SOP (New), TLP250S SOP (Refurbished) |
|---|
Related products
-
MOSFETs, IGBTs and BJTs
IR2151 IC DIP8 MOSFET Driver
IR2151 IC Features
- Fully operational to +600V
- Tolerant to negative transient voltage
- dV/dt immune
- Undervoltage lockout
- Programmable oscillator frequency
- VOFFSET Duty Cycle IO+/VOUT Deadtime (typ.) 600V max. 1.2 µs
- Matched propagation delay for both channels Low side output in phase with RT
SKU: n/a -
MOSFETs, IGBTs and BJTs
IR2109 IC DIP8 IR2109S SOP8 Driver
Features- Floating channel designed for bootstrap operation
- Fully operational to +600 V
- Tolerant to negative transient voltage
- dV/dt immune
- Gate drive supply range from 10 to 20 V
- Undervoltage lockout for both channels
- 3.3 V, 5 V, and 15 V logic input compatible
- Cross-conduction prevention logic
- Matched propagation delay for both channels
- High side output in phase with IN input
- Logic and power ground + /- 5 V offset
- Internal 540ns dead-time
- Lower di/dt gate driver for better noise immunity
- Shut down input turns off both channels
SKU: n/a -
MOSFETs, IGBTs and BJTs, ICs and Optocouplers
A3120 IC HCPL3120 DIP8 SOP8 Driver
Features:
- 2.0 A Minimum Peak Output Current
- 15 kV/µs Minimum Common Mode Rejection (CMR) at VCM = 1500 V
- 0.5 V Maximum Low-Level Output Voltage (VOL) Eliminates the Need for a Negative Gate Drive
- ICC = 5 mA Maximum Supply Current
- Under Voltage Lock-Out Protection (UVLO) with Hysteresis
- Wide Operating VCC Range: 15 to 30 Volts
- 500 ns Maximum Switching Speeds
- Industrial Temperature Range : -40°C to 100°C
SKU: n/a -
MOSFETs, IGBTs and BJTs
IRF3710 MOSFET 100V
IRF3710 MOSFET Features- Planar cell structure for wide SOA
- Optimized for the broadest availability from distribution partners
- Product qualification according to JEDEC standard
- Silicon optimized for applications switching below <100kHz
- Industry-standard through-hole power package
- High-current carrying capability package (up to 195 A, die-size dependent)
- Capable of being wave-soldered
SKU: n/a -
MOSFETs, IGBTs and BJTs
K75T60 IGBT IKW75N60T 600V 75A
K75T60 IGBT Features and Specifications:
- Very low VCE (sat) 1.5V (typ.)
- Maximum Junction Temperature of 175℃
- Short circuit withstand time 5micro seconds
- Positive temperature coefficient in VCE (sat)
- Very tight parameter distribution
- High ruggedness, temperature-stable behavior
- Very high switching speed
- Low Electro Magnetic Interference
- Very soft and fast recovery anti-parallel Emitter Controlled HE diode
- Pb-free lead plating
- RoHS compliant
SKU: n/a
