EGS002 Pure Sine Wave Inverter SPWM Driver Board 5V
EGS002 Pure Sine Wave Inverter SPWM Driver Board Specifications:
- 5V power supply
- 4 pins of pure sine wave output frequency set:
- Integrated and bipolar modulation
- Along with lineage control, pin 4 time:
- External 12 MHz crystal oscillator
- PWM carrier frequency is equal to 23.4KHz
- Has voltage, current and temperature feedback
- Overvoltage, under voltage, overcurrent, overheating protection circuit
- Has serial communication to adjust the output voltage, frequency and other parameters
“>
₨800 – ₨1,250
CompareEGS002 Inverter Driver Board 5V is a sine wave inverter controller that can be used to have a pure sine wave inverter without the need for programming. In this circuit, ASIC EG8010 is used as a control chip and IR2113S is used as a MOSFET driver. This board can control voltage, current, temperature, fan speed and LED display. Also, by connecting to an LCD, we will be able to monitor the output voltage, current, temperature and frequency. Using jumpers, we can limit or expand the functions of the board. EGS002 Inverter Driver Board
“>
| Version | Without LCD, With LCD |
|---|
Related products
-
-
Modules and Motors
RFID Card 125KHz
RFID Card 125KHz Specifications:
- Frequency: 125KHz
- Material: PVC or PET, ensuring durability
- Dimensions: Standard credit card size (85.6 x 54 mm)
- Operating Temperature: -20°C to +50°C (-4°F to +122°F)
- Read Range: Dependent on the RFID reader used, typically ranges from a few centimetres to several meters
- Data Storage: Typically has a fixed unique identifier (UID) programmed during manufacturing
- Printable Area: Standard ISO CR80 printing area (84.6 x 53.98 mm)
- Compatibility: Compatible with 125KHz RFID readers adhering to industry standards
“>
SKU: n/a -
Modules and Motors
MAX6675 Module K-Type Thermocouple
MAX6675 Module Specifications:
- Thermocouple temperature range: 0 to 450oC
- Module sensor temperature range (oC): 0 to 1024
- Temperature resolution (oc): 0.25
- Module supply voltage: 3 to 5.5V
- Module current: 50mA
- Module interface: Serial (SO, SCK, CS) 16-bit SPI compatible.
- Thermocouple accuracy (0-700oC): 8 LSBs
- Thermocouple disconnect detection.
SKU: n/a -
Modules and Motors
ACS712 Arduino Current Sensor
ACS712 Arduino Current Sensor Voltage Output
- 1/2 VCC when no load or it is 2.5V since we use 5V as VCC.
- 5A type generate 185mV every amp current
- 20A type generate 100mV every amp current
- 30A type generate 66mV every amp current
SKU: acs712-current-sensor -
Modules and Motors
RFID Card 13.56MHz
RFID Card 13.56MHz Specifications:
- Frequency: 13.56MHz
- Communication Protocol: ISO 14443A/B, ISO 15693
- Chip Type: Contactless Smart Card IC (Integrated Circuit)
- Memory Capacity: Varies based on chip type and application requirements (e.g., 1KB, 4KB, or more)
- Operating Range: Standard reading distance up to 10 cm, depending on the RFID reader’s power and antenna design.
- Material: PVC or other durable materials
- Dimensions: Standard credit card size (85.6 x 53.98 mm) or customizable based on specific requirements.
- Operating Temperature: -20°C to +70°C
- Data Encryption: Advanced encryption algorithms for enhanced security
- Compatibility: Compatible with a wide range of RFID readers and devices supporting the 13.56MHz frequency.
SKU: n/a
