IC and IC Sockets
NE555N Timer IC
NE555N Timer IC Features:
- LOW TURN-OFF TIME
- MAXIMUM OPERATING FREQUENCY GREATER THAN 500kHz
- TIMING FROM MICROSECONDS TO HOURS
- OPERATES IN BOTH ASTABLE AND MONOSTABLE MODES
- HIGH OUTPUT CURRENT CAN SOURCE OR SINK 200mA
- ADJUSTABLE DUTY CYCLE
- TTL COMPATIBLE
- TEMPERATURE STABILITY OF 0.005% PER°C
₨10 – ₨30
CompareNE555N Timer IC is a highly stable controller capable of producing accurate time delays or oscillations. In the time delay mode of operation, the time is precisely controlled by one external resistor and capacitor. For a stable operation as an oscillator, the free-running frequency and the duty cycle are both accurately controlled with two external resistors and one capacitor. The circuit may be triggered and reset on falling waveforms, and the output structure can source or sink up to 200mA.
The NE555 monolithic timing circuit is a highly stable controller capable of producing accurate time delays or oscillations. In the time delay mode of operation, the time is precisely controlled by one external resistor and capacitor. For a stable operation as an oscillator, the free-running frequency and the duty cycle are both accurately controlled with two external resistors and one capacitor. The circuit may be triggered and reset on falling waveforms, and the output structure can source or sink up to 200mA.
| Version | Original, China |
|---|
Related products
-
IC and IC Sockets
Socket 8-Pin
Socket 8 Pin Specifications:
- Pin Count: 8
- Mounting Style: Through-hole or Surface Mount Device (SMD), depending on application requirements.
- Material: High-quality, durable materials to ensure mechanical strength and reliability in various operating conditions.
- Contact Material: Phosphor Bronze or Beryllium Copper for excellent electrical conductivity and resistance to corrosion.
- Contact Plating: Gold or Tin plating options to maintain a secure and low-resistance connection.
- Pitch: Standard pitch to accommodate 8-pin IC packages with precision.
- Socket Body: Robust design for mechanical stability and ease of handling during insertion and extraction of ICs.
- Socket Insulation: Insulating material to prevent short circuits and ensure electrical isolation between pins.
- Operating Temperature Range: Suitable for a wide temperature range to meet diverse application requirements.
- Current Rating: Adequate current-carrying capacity to handle the specified ICs.
- RoHS Compliance: Compliant with RoHS (Restriction of Hazardous Substances) directives for environmental safety.
- Package Dimensions: Precise dimensions to accommodate the specified 8-pin IC package size and configuration.
- Insertion and Extraction Force: Optimized for easy insertion and removal of ICs while maintaining a secure connection.
- Durability: Designed for a high number of insertion and extraction cycles to ensure long-term reliability.
- Application: Suitable for use in various electronic circuits, prototyping boards, and test setups where 8-pin ICs are employed.
- Compatibility: Compatible with a range of 8-pin ICs from different manufacturers, offering versatility in circuit designs.
SKU: n/a -
IC and IC Sockets
ZIF Socket 48 Pin for Super Pro
ZIF Socket 48 Pin for Super Pro Specifications:
- Pin Count: 48 pins – Accommodates a wide range of ICs.
- ZIF Design: Zero Insertion Force mechanism for easy and secure handling of integrated circuits.
- Compatibility: Specifically designed for use with Super Pro programmers.
- Material: High-quality materials for durability and longevity.
- Connector Type: DIP (Dual In-line Package) for straightforward integration with programmable devices.
- Pitch: Standard 2.54mm pitch for compatibility with various IC packages.
- Locking Mechanism: Secure locking mechanism to ensure proper connection during programming.
- Operating Temperature Range: Suitable for a broad range of environmental conditions.
- Application: Ideal for programming microcontrollers, EEPROMs, and other programmable devices.
SKU: n/a -
IC and IC Sockets
5815M RDA5815M QFN-20 Signal IC
5815M IC RDA5815M QFN-20 Signal IC Specifications:
- Â Single-chip RF-to-baseband Satellite receiver
- Â CMOS Fully integrated RF front end
- Â Low noise and wide dynamic range zero-IF receiver
- Â Input frequency range: 250 to 2300 MHz
- Â Input signal level: -100 to 5 dBm
- Â More than 85dB gain control range
- Â Fully integrated PLL (dividers, charge pump, phase & frequency detectors, loop filters, etc.)
- Â Integrated RX VCO
- Â Integrated baseband LPF with selectable cut-off Applications frequency from 4MHz to 40MHz with 1MHz step
- Â Integrated LNA with RF AGCÂ Integrated reference oscillator (27MHz is the default)
- Â I2C bus interface
- Â Automatic gain control
-  0.11μm RF CMOS technology
- Â 3V to 3.6V operation
- Â power consumption less than 600mW
- Â Lower profile packages:
-  RDA5815M 5×5 mm QFN32 Pin assignment (32 pin QFN 5×5 mm)
- Â Set-top boxes
- Â Digital video recorders
- Â Digital television
- Â Satellite PC-TV
SKU: n/a -
IC and IC Sockets
Socket 40-Pin
Socket 40 Pin Specifications:
- Pin Count: 40
- Package Compatibility: Designed to accommodate a wide range of 40-pin IC packages, including DIP (Dual Inline Package) and other standard configurations.
- Mounting Style: Suitable for both through-hole mounting for secure PCB attachment.
- Material: High-quality materials selected for durability and resistance to environmental factors.
- Contact Material: Phosphor Bronze or Beryllium Copper, providing excellent electrical conductivity and corrosion resistance.
- Contact Plating: Gold or Tin plating options available to ensure a reliable and low-resistance connection.
- Pitch: Standardized pitch to accommodate 40-pin IC packages with precision.
- Socket Body: Sturdy socket body design to provide mechanical strength and stability during insertion and removal of ICs.
- Socket Insulation: Insulating material prevents short circuits and ensures electrical isolation between pins.
- Operating Temperature Range: Wide temperature range to meet various application requirements.
- Current Rating: Adequate current-carrying capacity to handle the specified 40-pin ICs.
- RoHS Compliance: Compliant with RoHS directives for environmental safety.
- Package Dimensions: Precise dimensions to accommodate the specified 40-pin IC package size and configuration.
- Insertion and Extraction Force: Optimized for easy insertion and removal of 40-pin ICs while maintaining a secure connection.
- Durability: Designed for a high number of insertion and extraction cycles to ensure long-term reliability.
- Application: Ideal for use in prototyping, testing, and development environments where frequent replacement or testing of 40-pin ICs is required.
- Compatibility: Compatible with a variety of 40-pin ICs from different manufacturers, offering versatility in electronic designs.
SKU: n/a
