IC and IC Sockets
LM2903CP DIP-8
Features:
- Improved specifications
- Maximum rating: up to 38 V
- ESD rating (HBM): 2k V
- Low input offset: 0.37 mV
- Low input bias current: 3.5 nA
- Low supply-current: 200 µA per comparator
- Faster response time of 1 µsec
- Extended temperature range for LM393B
- Available in tiny 2 x 2mm WSON package
- Common-mode input voltage range includes ground
- Differential input voltage range equal to maximum-rated supply voltage: ±38 V
- The low output saturation voltage
- Output compatible with TTL, MOS, and CMOS
Compare
LM2903CP is the next-generation version of the industry-standard LM393 and LM2903 comparator family. These next-generation B-version comparators feature lower offset voltage, higher supply voltage capability, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance and input ruggedness through dedicated ESD clamps. The LM393B and LM2903B can drop-in replace the LM293, LM393 and LM2903, for both “A” and “V” grades.
All devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Quiescent current is independent of the supply voltage.
Related products
-
IC and IC Sockets
STI3411A S15B Voltage Regulator
STI3411A S15B Voltage Regulator Specifications:
- High Efficiency: Up to 96%
- 1.0MHz Constant Frequency Operation
- 2A Output Current
- No Schottky Diode Required
- 2.3V to 6V Input Voltage Range
- Output Voltage as Low as 0.6V
- PFM Mode for High Efficiency in Light Load
- 100% Duty Cycle in Dropout Operation
-  Low Quiescent Current: 40μA
- Â Short Circuit Protection
- Â Thermal Fault Protection
- Â Inrush Current Limit and Soft Start
- Â Input overvoltage protection(OVP)
-  <1μA Shutdown Current
- Â SOT23-5 package
“>
SKU: n/a -
IC and IC Sockets
Socket 8-Pin
Socket 8 Pin Specifications:
- Pin Count: 8
- Mounting Style: Through-hole or Surface Mount Device (SMD), depending on application requirements.
- Material: High-quality, durable materials to ensure mechanical strength and reliability in various operating conditions.
- Contact Material: Phosphor Bronze or Beryllium Copper for excellent electrical conductivity and resistance to corrosion.
- Contact Plating: Gold or Tin plating options to maintain a secure and low-resistance connection.
- Pitch: Standard pitch to accommodate 8-pin IC packages with precision.
- Socket Body: Robust design for mechanical stability and ease of handling during insertion and extraction of ICs.
- Socket Insulation: Insulating material to prevent short circuits and ensure electrical isolation between pins.
- Operating Temperature Range: Suitable for a wide temperature range to meet diverse application requirements.
- Current Rating: Adequate current-carrying capacity to handle the specified ICs.
- RoHS Compliance: Compliant with RoHS (Restriction of Hazardous Substances) directives for environmental safety.
- Package Dimensions: Precise dimensions to accommodate the specified 8-pin IC package size and configuration.
- Insertion and Extraction Force: Optimized for easy insertion and removal of ICs while maintaining a secure connection.
- Durability: Designed for a high number of insertion and extraction cycles to ensure long-term reliability.
- Application: Suitable for use in various electronic circuits, prototyping boards, and test setups where 8-pin ICs are employed.
- Compatibility: Compatible with a range of 8-pin ICs from different manufacturers, offering versatility in circuit designs.
SKU: n/a -
IC and IC Sockets
74HC273 SMD SOP-20 IC
74HC273 SMD SOP-20 IC Features:
- Wide Operating Voltage Range of 2 V to 6 V
- Outputs Can Drive Up to 10 LSTTL Loads
- Low Power Consumption, 80-µA Maximum ICC
- Typical tpd = 12 ns
- ±4-mA Output Drive at 5 V
- Low Input Current of 1-µA Maximum
- Contain Eight Flip-Flops With Single-Rail Outputs
- Direct Clear Input
SKU: n/a -
IC and IC Sockets
Socket 16-Pin
Socket 16 Pin Specifications:
- Pin Count: 16
- Package Compatibility: Designed to accommodate a variety of 16-pin IC packages, ensuring broad applicability.
- Mounting Style: Available in different configurations, including through-hole and surface mount options, to suit diverse PCB layouts.
- Material: High-quality materials chosen for durability, electrical conductivity, and resistance to environmental factors.
- Contact Material: Phosphor Bronze or Beryllium Copper, selected for optimal electrical performance and corrosion resistance.
- Contact Plating: Gold or Tin plating options to ensure a reliable and low-resistance electrical interface.
- Pitch: Standard pitch to accommodate 16-pin IC packages with precision.
- Socket Body: Robust design for mechanical strength and stability, ensuring a secure connection.
- Socket Insulation: Insulating material to prevent short circuits and ensure electrical isolation between pins.
- Operating Temperature Range: Wide temperature tolerance to meet the demands of various operating environments.
- Current Rating: Adequate current-carrying capacity to handle the specified 16-pin ICs safely.
- RoHS Compliance: Compliant with RoHS (Restriction of Hazardous Substances) directives for environmental safety.
- Package Dimensions: Precise dimensions to accommodate the specified 16-pin IC package size and configuration.
- Insertion and Extraction Force: Optimized for easy insertion and removal of 16-pin ICs while maintaining a secure connection.
- Durability: Designed for a high number of insertion and extraction cycles, ensuring long-term reliability.
- Application: Ideal for use in a wide range of electronic applications, including prototyping, testing, and development projects where frequent replacement or testing of 16-pin ICs is required.
- Compatibility: Compatible with various 16-pin ICs from different manufacturers, providing flexibility in design and component selection.
SKU: n/a
