Shop
Showing 151–165 of 663 results
-
Programmers and Burners
AVRISP MKII Programmer
AVRISP MKII Programmer FEATURES
- Tested and working with AVR Studio 4, AVR Studio 5, Atmel Studio 6, Atmel Studio 7
- Tested and working with Arduino and AVRDUDE after a firmware change
- Tested and working with Windows XP, Windows 7, Windows 10, Debian Linux, Ubuntu 14.04
- Connects to PC via USB type B at 2.0 Full speed
- No need for external power supply as it takes the power supply from USB
- Uses Atmel’s 2×5 pin ICSP and 2×3 pin PDI and TPI connector layout
- Works with 5V and 3.3V targets and can supply target with power (selectable)
- Programs both flash and EEPROM
- Supports fuses and lock bit programming
- Upgradeable for future device support
- Supports target voltages from 1.8V to 5.5V
- Adjustable ISP programming speed (50Hz to 8MHz SCK frequency)
- Dimensions: (45×30) mm ~ (1.7×1.2)” + 20 cm ~ 8″ cable
SKU: n/a -
Transistors
BC557 PNP Transistor
BC557 PNP Transistor is a transistor hence the collector and emitter will be closed (Forward biased) when the base pin is held at ground and will be opened (Reverse biased) when a signal is provided to the base pin. This is where a PNP transistor differs from an NPN transistor, a Logic state (blue colour) is used to toggle between Ground and Signal Voltage (Emitter-Base Voltage VBE)
SKU: n/a -
Other Electronics
Beagle Bone Board – Black
Features
- AM3358 1GHz ARM® Cortex-A8 Processor
- 4GB 8-bit eMMC Onboard Flash
- 3D Graphics Accelerator
- NEON Floating-Point Accelerator
- 2x PRU 32-bit Microcontroller
- Connectivity:
- USB Client for power and communications
- USB Host
- Ethernet
- Micro HDMI
- 2x 46-pin Headers
- Software Compatibility
- Angstrom Linux
- Android
- Ubuntu
- Cloud9 IDE on Node.js with BoneScript
- and More…
SKU: n/a -
Modules and Motors
BH1750 Light Sensor
BH1750 Light Sensor Features
- Illuminate to Digital Converter
- Wide range and High resolution. ( 1 – 65535 lx )
- Low Current by power down function
- 50Hz / 60Hz Light noise reject-function
- I2C bus Interface ( f / s Mode Support )
- No need for any external parts
- It is possible to select 2 types of I2C slave-address.
- It is possible to detect min. 0.11 lx, max. 100000 lx by using this function.
SKU: n/a -
Modules and Motors
Bluetooth Module BLE-CC-2541
Features
- RF
- 2.4-GHz Bluetooth low energy Compliant and Proprietary RF System-on-Chip
- Supports 250-kbps, 500-kbps, 1-Mbps, 2-Mbps Data Rates
- Excellent Link Budget, Enabling Long-Range Applications Without External Front End
- Programmable Output Power up to 0 dBm
- Excellent Receiver Sensitivity (–94 dBm at 1 Mbps), Selectivity,
and Blocking Performance - Suitable for Systems Targeting Compliance With Worldwide Radio
Frequency Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe),
FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
- Layout
- Few External Components
- Reference Design Provided
- 6-mm × 6-mm QFN-40 Package
- Pin-Compatible With CC2540 (When Not Using USB or I2C)
- Low Power
- Active-Mode RX Down to: 17.9 mA
- Active-Mode TX (0 dBm): 18.2 mA
- Power Mode 1 (4-µs Wake-Up): 270 µA
- Power Mode 2 (Sleep Timer On): 1 µA
- Power Mode 3 (External Interrupts): 0.5 µA
- Wide Supply-Voltage Range (2 V–3.6 V)
- TPS62730 Compatible Low Power in Active Mode
- RX Down to: 14.7 mA (3-V supply)
- TX (0 dBm): 14.3 mA (3-V supply)
- Microcontroller
- High-Performance and Low-Power 8051 Microcontroller Core
With Code Prefetch - In-System-Programmable Flash, 128- or 256-KB
- 8-KB RAM With Retention in All Power Modes
- Hardware Debug Support
- Extensive Baseband Automation, Including Auto-Acknowledgment
and Address Decoding - Retention of All Relevant Registers in All Power Modes
- High-Performance and Low-Power 8051 Microcontroller Core
- Peripherals
- Powerful Five-Channel DMA
- General-Purpose Timers (One 16-Bit, Two 8-Bit)
- IR Generation Circuitry
- 32-kHz Sleep Timer With Capture
- Accurate Digital RSSI Support
- Battery Monitor and Temperature Sensor
- 12-Bit ADC With Eight Channels and Configurable Resolution
- AES Security Coprocessor
- Two Powerful USARTs With Support for Several Serial Protocols
- 23 General-Purpose I/O Pins
(21 × 4 mA, 2 × 20 mA) - I2C interface
- 2 I/O Pins Have LED Driving Capabilities
- Watchdog Timer
- Integrated High-PerformanceComparator
- Development Tools
- CC2541 Evaluation Module Kit (CC2541EMK)
- CC2541 Mini Development Kit (CC2541DK-MINI)
- SmartRF™ Software
- IAR Embedded Workbench™ Available
SKU: n/a - RF
-
Sensors, Modules and Motors
BMP280 Pressure Sensor Module
Specifications:
- Pressure Range: 300 hPa to 1100 hPa
- Pressure Accuracy: ±1.0 hPa
- Temperature Range: -40°C to +85°C
- Temperature Accuracy: ±0.5°C
- Digital Interface: I2C and SPI
- Supply Voltage: 1.8V to 3.6V
- Current Consumption: 2.7 µA at 1 Hz measurement rate
- Resolution: 0.01 hPa (Pressure), 0.01°C (Temperature)
- Dimensions: Compact and space-saving design
- Operating Modes: Normal, Forced, and Sleep mode for optimized power consumption
- Calibration Coefficients: Stored in on-chip memory for precise sensor compensation
SKU: n/a -
Programmers and Burners
BMW AK90 Key Programmer(Newest V3.19 AK90+ For All BMW EWS)
- Read data dumps directly from MCU which marked 1D47J , 2D47J , 0D46J ,2L86D without removing MCU from circuit board , easy to do yourself.
- Renew, lock or unlock keys by AK90+ software.
- Program original chips “EML 10030A” for making keys .
- Identify keys for all EWS and CAS , show VIN , key No. also change VIN and mileage in ews.
- The lastest update software version is V3.16 for EWS4.4
- EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4
SKU: bmw-key-programmer -
Project Boards
Breadboard
Features:
- A breadboard is a solder-less device for temporary prototypes with electronics and test circuit designs.
- Most electronic components in electronic circuits can be interconnected by inserting their leads or terminals into the holes and then making connections through wires where appropriate.
- Breadboards are one of the most fundamental pieces when learning how to build circuits.
SKU: n/a -
Breakout Boards
Breadboard Power Supply Module
Specifications:
- Input voltage: 10-24VDC, recommended 18V wall power supply (Power Jack)
- Output voltage: 3.3V/5V/Adjustable 1.8-12V
- Output current: 650mA
- Pin Headers for input and output
- Central positive DC 2.1 power jack for input
- Size: 2.64″ x 1.69
SKU: n/a -
-