Shop
Showing 31–45 of 663 results
-
Connectors
2 Pin PCB Connector Right Angle
2 Pin PCB Connector Right Angle Specifications:
- Connector Type: Right Angle Board-to-Board (RCB) Connector
- Number of Pins: 2
- Termination Style: Through-Hole or Surface Mount, depending on application requirements.
- Orientation: Right Angle, allowing for space-efficient and versatile PCB designs.
- Pitch: Standard pitch to accommodate easy mating and reliable electrical connections.
- Contact Material: Phosphor Bronze or Beryllium Copper for excellent conductivity and durability.
- Contact Plating: Gold or Tin plating for corrosion resistance and reliable signal transmission.
- Insulator Material: High-quality insulating material to ensure electrical isolation and prevent short circuits.
- Operating Temperature Range: Suitable for a wide temperature range to meet various application environments.
- Current Rating: Adequate current-carrying capacity to handle the specified number of pins.
- Voltage Rating: Designed to meet or exceed industry standards for safe and reliable operation.
- Mating Cycles: Engineered for a high number of mating cycles, ensuring long-term durability.
- Mounting Style: Available in both Through-Hole and Surface Mount configurations for flexibility in design.
- Durability: Robust construction for resistance to mechanical stress and environmental factors.
- RoHS Compliance: Compliant with RoHS directives, meeting environmental standards.
- Application: Suitable for various electronic devices, including consumer electronics, industrial equipment, and more, where a right-angle connection is essential.
- Compatibility: Designed to be compatible with other standard 2-pin connectors, ensuring versatility in usage.
SKU: n/a -
LCDs
2.4 Inch TFT LCD For Arduino
2.4 Inch TFT LCD Arduino Specifications:
- 2.4″ diagonal LCD TFT display
- 240×320 resolution
- 5V compatible! Use with 3.3V or 5V logic
- Onboard 3.3V 300mA LDO regulator
- 8-bit digital interface, plus 4 control lines
- 4-wire resistive touchscreen
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, and 3 and analog 4 and 5. Pin 12 is available if not using the microSD
SKU: n/a -
Sensors
2.5 Bar MAP Sensor MPX4250
Specifications:
- Pressure Range: 2.5 Bar
- Output Type: Analog Voltage
- Supply Voltage: 5 VDC
- Accuracy: ±1.5% of Full Scale
- Operating Temperature Range: -40°C to 125°C (-40°F to 257°F)
- Response Time: <1 ms
- Electrical Connection: Industry-standard connector for easy integration
- Mounting: Various mounting options for flexibility in installation
- Compliance: RoHS compliant, ensuring environmental friendliness
- Application: Ideal for automotive engine management systems, industrial process control, and other applications requiring accurate pressure measurement.
SKU: n/a -
Crystal Oscillators
20MHz Crystal Oscillator
Specifications:
- Frequency Output: 20MHz – The crystal oscillator generates a stable clock signal at a frequency of 20 megahertz.
- Crystal Resonator Type: Quartz crystal resonator, known for its high stability and low phase noise characteristics, ensuring accurate frequency generation.
- Frequency Tolerance: Precise frequency control with low tolerance levels, typically within a few parts per million (ppm), to meet stringent timing requirements.
- Operating Temperature Range: Suitable for a wide temperature range, ensuring stable performance across various environmental conditions.
- Supply Voltage: Compatible with standard supply voltages commonly used in electronic systems, typically ranging from 3.3V to 5V.
- Output Waveform: Provides a clean and square wave output with minimal harmonics, making it suitable for digital applications.
- Output Load: Designed to drive standard loads commonly found in digital circuits, ensuring signal integrity and reliability.
- Start-up Time: Rapid start-up time, allowing for quick stabilization of the oscillator upon power-up.
- Aging Characteristics: Low aging rate, indicating minimal frequency drift over extended periods of operation.
- Package Type: Available in various package types, including through-hole and surface mount, to accommodate different PCB layouts and assembly processes.
- Phase Noise: Low phase noise characteristics, ensuring minimal signal jitter for precise timing applications.
- RoHS Compliance: Compliant with RoHS (Restriction of Hazardous Substances) directives for environmental safety.
- Application: Suitable for microcontrollers, microprocessors, communication systems, and other electronic devices where accurate timing is essential.
- Compatibility: Standard 20MHz frequency, ensuring compatibility with a wide range of electronic components and systems.
SKU: n/a -
LCDs
240128 LCD (240×128) Blue/Green
240128 LCD (240×128) Blue/Green Key Specifications/Special Features:
- 240 x 128 pixels COB graphics LCD module
- Overall dimensions: 144 x 144 x 15mm (max)
- Viewing area: 114 x 64mm
- Transmissive polarizer type (optional transflective/reflective)
- CCFL backlight (optional bottom LED backlight/side LEDbacklight/EL backlight/no backlight)
- White backlight (optional yellow-green)
- LCD STN blue (optional LCD STN yellow/STN grey/FSTN)
- Viewing angle: 6:00 (optional 12:00)
- Standard temperature range (optional wide temperature)
- Parallel interface
SKU: n/a -
Tools & Instruments
24V Adapter Power Supply 1.5A
Key Features:
- Output Voltage: Delivers a constant 24V DC output suitable for many electronics and devices.
- Input Voltage Range: Supports a wide AC input range (typically 100-240V), allowing for international compatibility.
- Current Rating: Available in different current ratings (e.g., 1A, 2A, 5A) to suit various power requirements.
- Safety Features: Built-in protections against over-voltage, over-current, short circuit, and over-temperature ensure safe operation.
- Durable Build: Sturdy and compact design, with quality casing to protect internal components from impact and environmental stress.
- Energy Efficient: Designed for low power consumption, meeting efficiency standards for reduced energy use.
- Plug and Play: Easy to install with a standard DC barrel connector (often 5.5mm x 2.1mm), commonly used with LED lights, security cameras, and other low-voltage devices.
SKU: n/a -
Cables
25 Pin Male to Female Cable
Features :
- Connector 1: DB25 Male and Connector 2: DB25 Female.
- Each cable is foil shielded for EMI/RFI protection, available fully molded with thumbscrew connectors for a fast, easy connection every time.
- All 25 lines are wired straight through pin-to-pin for ease of compatibility.
SKU: n/a -
Modules and Motors
2DM860 Digital Stepper Driver
2DM860 Digital Stepper Driver Specifications:
- The new 32-bit DSP technology
- Optically isolated differential inputs (26LS32)
- Extra-low noise and vibration
- Built 500 high octave segments (segments selected value)
- * 4,6,8 lines can drive two-phase stepper motor
- Current settings can be arbitrarily choose between ratings
- Stationary current is automatically halved
- Pulse frequency response up to 250KHz
- Overvoltage, undervoltage, short circuit protection
- Alarm output function I / O ports
- Alarm clear input ENA
SKU: n/a -
Transistors
2N2222 NPN Transistor
2N2222 NPN Transistor Features
- Bi-Polar high current NPN Transistor
- DC Current Gain (hFE) is 100
- Continuous Collector current (IC) is 800mA
- Emitter Base Voltage (VBE) is 6V
- Collector-Emitter Voltage (VCE) is 30V
- Base Current(IB) is 5mA maximum
- Available in To-92 Package
“>
SKU: n/a
