IC and IC Sockets
Showing 31–45 of 95 results
-
IC and IC Sockets
L6386D SOP
L6386D SOP Features:
- HIGH VOLTAGE RAIL UP TO 600V
- dV/dt IMMUNITY +- 50 V/nsec iN FULL TEMPERATURE RANGE
- DRIVER CURRENT CAPABILITY:
400 mA SOURCE,
650 mA SINK - SWITCHING TIMES 50/30 nsec RISE/FALL WITH 1nF LOAD
- CMOS/TTL SCHMITT TRIGGER INPUTS WITH HYSTERESIS AND PULL DOWN
- UNDER VOLTAGE LOCK OUT ON LOWER AND UPPER DRIVING SECTION
- INTEGRATED BOOTSTRAP DIODEOUTPUTS IN PHASE WITH INPUTS
SKU: n/a -
IC and IC Sockets
L6388D SOP
Features
- High Voltage Handling: Handles high voltage up to 600V for reliable power management.
- Low Power Consumption: Designed for low power operation, making it suitable for battery-powered applications.
- Wide Operating Temperature Range: Operates over a wide temperature range from -40°C to +150°C.
- High-Side and Low-Side Drivers: Features both high-side and low-side drivers for flexible power management.
SKU: n/a -
IC and IC Sockets
L6598 SOP
Features
High voltage rail up to 600 VdV/dt immunity ±50 V/ns in full temperature range
Driver current capability: 250 mA source450 mA sink
Switching times 80/40 ns rise/fall with 1 nF load
CMOS shutdown input
Undervoltage lockout
Soft-start frequency shifting timingSKU: n/a -
IC and IC Sockets
L6599 SOP
Features
■ 50 % duty cycle, variable frequency control of
resonant half-bridge
■ High-accuracy oscillator
■ Up to 500 kHz operating frequency
■ Two-level OCP: frequency-shift and latched
shutdown
■ Interface with PFC controller
■ Latched disable input
■ Burst-mode operation at light load
■ Input for power-ON/OFF sequencing or
brownout protection
■ Non-linear soft-start for monotonic output
voltage rise
■ 600 V-rail compatible high-side gate driver with
integrated bootstrap diode and high dV/dt
immunity
■ -300/800 mA high-side and low-side gate
drivers with UVLO pull-downSKU: n/a -
IC and IC Sockets
LF347N DIP-14
LF347N DIP-14 Features:
- Input Offset Voltage of 5.0 mV Max (LF347B)
- Low Input Bias Current: 50 pA
- Low Input Noise Voltage: 16 nV/Hz
- Wide Gain Bandwidth: 4.0 MHz
- High Slew Rate: 13V/µs
- Low Supply Current: 1.8 mA per Amplifier
- High Input Impedance: 1012 Ω
- High Common Mode and Supply Voltage Rejection Ratios: 100 dB
“>
SKU: n/a -
-
IC and IC Sockets
LM2901N DIP-14
LM2901N DIP-14 Features
- Improved specifications of B-version
- Maximum rating: up to 38 V
- ESD rating (HBM): 2k V
- Low input offset: 0.37 mV
- Low input bias current: 3.5 nA
- Low supply-current: 200 µA per comparator
- Faster response time of 1 µsec
- Extended temperature range for LM339B
- B-version is drop-in replacement for LM239, LM339 and LM2901, A and V versions
- Common-mode input voltage range includes ground
- Differential input voltage range equal to maximum-rated supply voltage: ±38 V
- The low output saturation voltage
- Output compatible with TTL, MOS, and CMOS
SKU: n/a - Improved specifications of B-version
-
IC and IC Sockets
LM2902 SOP-14
LM2902 SOP-14 Features
- Wide gain bandwidth: 1.3 MHz
- Input common-mode voltage range includes the negative rail
- Large voltage gain: 100 dB
- Supply current per amplifier: 375 µA
- Low input bias current: 20 nA
- Low input offset current: 2 nA
- Wide power supply range:
– Single supply: 3 V to 30 V
– Dual supplies: ± 1.5 V to ± 15 V
SKU: n/a -
IC and IC Sockets
LM2902N DIP-14
LM2902 Features
- Improved specifications
- Supply range: 3V to 36V (B, BA versions)
- Low input offset voltage: ±2mV (BA version) / 3mV (B version)
- ESD rating: 2kV (HBM), 1.5kV (CDM)
- EMI rejection: integrated RF and EMI filter
- Low input bias current: 50nA maximum (across –40°C to 125°C)
- Common-mode input voltage range includes V–
- Input voltage differential can be driven up to supply voltage
SKU: n/a - Improved specifications
-
IC and IC Sockets
LM2903 SOP-8
LM2903 SOP-8 Features:
- Improved specifications
- Maximum rating: up to 38 V
- ESD rating (HBM): 2k V
- Low input offset: 0.37 mV
- Low input bias current: 3.5 nA
- Low supply-current: 200 µA per comparator
- Faster response time of 1 µsec
- Extended temperature range for LM393B
- Available in tiny 2 x 2mm WSON package
- B-version is drop-in replacement for LM293, LM393 and LM2903, A and V versions
- Common-mode input voltage range includes ground
- Differential input voltage range equal to maximum-rated supply voltage: ±38 V
- The low output saturation voltage
- Output compatible with TTL, MOS, and CMOS
SKU: n/a - Improved specifications
-
IC and IC Sockets
LM2903CP DIP-8
Features:
- Improved specifications
- Maximum rating: up to 38 V
- ESD rating (HBM): 2k V
- Low input offset: 0.37 mV
- Low input bias current: 3.5 nA
- Low supply-current: 200 µA per comparator
- Faster response time of 1 µsec
- Extended temperature range for LM393B
- Available in tiny 2 x 2mm WSON package
- Common-mode input voltage range includes ground
- Differential input voltage range equal to maximum-rated supply voltage: ±38 V
- The low output saturation voltage
- Output compatible with TTL, MOS, and CMOS
SKU: n/a - Improved specifications
-
IC and IC Sockets
LM2904 SOP-8
LM2904 Features:
- Wide supply range of 3 V to 36 V (B, BA versions)
- Quiescent current: 300 µA/ch (B, BA versions)
- Unity-gain bandwidth of 1.2 MHz (B, BA versions)
- Common-mode input voltage range includes ground, enabling direct sensing near ground
- 2-mV input offset voltage max. at 25°C (BA version)
- 3-mV input offset voltage max. at 25°C (A, B versions)
- Internal RF and EMI filter (B, BA versions)
- On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
SKU: n/a -
IC and IC Sockets
LM2904P DIP-8
LM2904P DIP-8 Features
- Wide supply range of 3 V to 36 V (B, BA versions)
- Quiescent current: 300 µA/ch (B, BA versions)
- Unity-gain bandwidth of 1.2 MHz (B, BA versions)
- Common-mode input voltage range includes ground, enabling direct sensing near ground
- 2-mV input offset voltage max. at 25°C (BA version)
- 3-mV input offset voltage max. at 25°C (A, B versions)
- Internal RF and EMI filter (B, BA versions)
SKU: n/a -
IC and IC Sockets
LM311 SOP
Features:
- Fast Response Times
- Strobe Capability
- Maximum Input Bias Current . . . 300 nA
- Maximum Input Offset Current . . . 70 nA
- Can Operate From Single 5-V Supply
Available in Q-Temp Automotive
– High-Reliability Automotive Applications
– Configuration Control/Print Support
– Qualification to Automotive Standards
SKU: n/a -
IC and IC Sockets
LM311P DIP-8
LM311P DIP-8 Features:
- Fast Response Times
- Strobe Capability
- Maximum Input Bias Current . . . 300 nA
- Maximum Input Offset Current . . . 70 nA
- Can Operate From Single 5-V Supply
Available in Q-Temp Automotive
– High-Reliability Automotive Applications
– Configuration Control/Print Support
– Qualification to Automotive Standards
SKU: n/a
