Modules and Motors
Showing 91–105 of 134 results
-
Modules and Motors
RC522 RFID Card Reader
RC522 RFID Card Reader Features and Benefits
- Highly integrated analog circuitry to demodulate and decode responses
- Buffered output drivers for connecting an antenna with the minimum number of external components
- Supports ISO/IEC 14443 A/MIFARE and NTAG
- The typical operating distance in Read/Write mode is up to 50 mm depending on the antenna size and tuning
- Supports MF1xxS20, MF1xxS70 and MF1xxS50 encryption in Read/Write mode
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd
- Supports MFIN/MFOUT
- Additional internal power supply to the smart card IC connected via MFIN/MFOUT
- Supported host interfaces
- SPI up to 10 Mbit/s
- I 2C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on the pin voltage supply
- FIFO buffer handles 64-byte send-and-receive
- Flexible interrupt modes
- Hard reset with low power function
- Power-down by software mode
- Programmable timer
- Internal oscillator for connection to 27.12 MHz quartz crystal
- 2.5 V to 3.3 V power supply
- CRC coprocessor
- Programmable I/O pins
- Internal self-test
SKU: n/a -
-
Modules and Motors
RFID Card 125KHz
RFID Card 125KHz Specifications:
- Frequency: 125KHz
- Material: PVC or PET, ensuring durability
- Dimensions: Standard credit card size (85.6 x 54 mm)
- Operating Temperature: -20°C to +50°C (-4°F to +122°F)
- Read Range: Dependent on the RFID reader used, typically ranges from a few centimetres to several meters
- Data Storage: Typically has a fixed unique identifier (UID) programmed during manufacturing
- Printable Area: Standard ISO CR80 printing area (84.6 x 53.98 mm)
- Compatibility: Compatible with 125KHz RFID readers adhering to industry standards
“>
SKU: n/a -
Modules and Motors
RFID Card 13.56MHz
RFID Card 13.56MHz Specifications:
- Frequency: 13.56MHz
- Communication Protocol: ISO 14443A/B, ISO 15693
- Chip Type: Contactless Smart Card IC (Integrated Circuit)
- Memory Capacity: Varies based on chip type and application requirements (e.g., 1KB, 4KB, or more)
- Operating Range: Standard reading distance up to 10 cm, depending on the RFID reader’s power and antenna design.
- Material: PVC or other durable materials
- Dimensions: Standard credit card size (85.6 x 53.98 mm) or customizable based on specific requirements.
- Operating Temperature: -20°C to +70°C
- Data Encryption: Advanced encryption algorithms for enhanced security
- Compatibility: Compatible with a wide range of RFID readers and devices supporting the 13.56MHz frequency.
SKU: n/a -
Modules and Motors
RGB LED Module 1W
RGB LED Module 1W Specifications:
- LED Power: 1W RGB LED
- Operating Voltage: 5V
- Control Interface: PWM (Pulse Width Modulation)
- Color Channels: Red, Green, Blue
- Dimensions: (L) x (W) x (H) mm
- Compatible with: Arduino Uno, Arduino Mega, and other Arduino boards
- Connector Type: Standard pin headers for easy connection
- Mounting Holes: Integrated for secure installation in projects
- Operating Temperature Range: -10°C to 60°C
- Storage Temperature Range: -20°C to 80°C
SKU: n/a -
Modules and Motors
SD Card Module for Arduino
Arduino SD Card Module Specifications:
- Communication Interface: SPI (Serial Peripheral Interface)
- Voltage Range: 3.3V to 5V
- Card Compatibility: SD, SDHC
- Onboard Level Conversion: Yes
- Power Supply: Stable 3.3V regulated output
- Dimensions: Compact form factor for versatile integration
- Indicator: LED for operational status
- Connectors: User-friendly for easy SD card insertion/removal
- Compatibility: Arduino boards and microcontrollers
- Application: Data logging, storage, and retrieval in Arduino projects
SKU: n/a -
Modules and Motors
SD Card MP3 Module
Features :
- Support plug-largest-capacity of 1G SD card
- Automatically identify audio files
- Can load WAV audio at 6KHz ~ 16KHz sample rate
- Can store up to 512 Section voice
- Support for micro-processor and key control
- With power-down save operation data function
- Support combination of documents playback, including the mute combination
- Quiescent Current: 16uA (do not insert SD card)
- Support play 4 Bit ADPCM format file
- Can load AD4 audio at 6KHz ~ 32KHz and 36KHz sampling rate
- 16bitDAC and PWM audio output
- With WTV020-SD-20S, WTV020-SD-16P two module types
- Can play any paragraph of the voice
- Can be loaded voice without software, just need to place voice into the SD card
- Operating voltage: DC2.5 ~ 3.6V
SKU: n/a -
Arduino, Modules and Motors, Sensors
Sensor Shield V4.0 for Arduino
Sensor Shield V4 Arduino Specifications:
- Compatibility: Compatible with Arduino Uno and other similar Arduino boards.
- Power Supply: Supports a wide voltage range for sensor compatibility.
- Material: High-quality, durable PCB for long-lasting performance.
- Dimensions: Compact and stackable design, ensuring it fits seamlessly with other Arduino shields.
- Connectivity: Multiple analog and digital pins for sensor and peripheral connectivity.
- Indicator LEDs: Status LEDs for power and sensor activity.
- Integrated Voltage Regulator: Ensures stable power supply to connected sensors.
- Mounting Holes: Screw holes for secure attachment to Arduino boards.
SKU: n/a -
Modules and Motors
Serial Mp3 Module Sensor
Features:
- Support sampling frequency (kHz):8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48
- Support file format:MP3/WAV
- Support Micro SD card, Micro SDHC Card
- 30 class adjustable volume
- UART TTL serial control playback mode, baud rate is 9600bps
- Power supply can be 3.2 ~ 5.2VDC
- Size:43mm x 25mm
SKU: n/a -
Modules and Motors
Sx1278 LoRa Module
Ra-02 is a wireless transmission module based on SEMTECH’s SX1278 wireless transceiver. It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has strong ability of anti-jamming and has the function of air wake-up Consumption.
SKU: n/a -
Modules and Motors
TB6600 Stepper Motor Driver Controller 4A 9~42V 32 Micro-Step CNC 1 Axis
Signal Input Terminal- CP +: pulse signal input positive terminal.
- CP-: pulse signal input negative terminal.
- DIR +: the motor reverse control of the positive terminal.
- DIR-: the motor reverse control of the negative terminal.
- EN +: motor off control of the positive terminal.
- EN-: motor off control of the negative terminal.
Motor winding connection:- A +: A + phase motor winding connection.
- A-: A- phase motor winding connection.
- B +: B + phase motor winding connection.
- B-: B- phase motor winding connection.
Operating voltage connection:- VCC: DC power positive (Note: 10V <VCC <42V).
- GND: DC power supply negative.
SKU: n/a -
Modules and Motors
TDA7297 Audio Amplifier Module
TDA7297 Audio Amplifier Module Specifications:
- Output Power: 15W + 15W (RMS)
- Supply Voltage: 6V – 18V DC
- Input Impedance: 22k ohms
- Signal-to-Noise Ratio (SNR): > 85 dB
- Total Harmonic Distortion (THD): < 0.05%
- Frequency Response: 20Hz – 20kHz
- Efficiency: > 90%
- Dimensions: 65mm x 56mm x 20mm (L x W x H)
- The Blue LED indicator light will be on when amplifier power on.
SKU: n/a -
Modules and Motors
TDA7492 Wireless Bluetooth Receiver Digital Audio Amplifier Board 50W 50W
Specifications:
- Amplifier Chip: TDA7492 Class D
- Output Power: 50W+50W (Stereo)
- Bluetooth Version: 4.0
- Input Voltage: DC 8-25V
- Input Impedance: 470 ohms
- SNR (Signal-to-Noise Ratio): 80dB
- Frequency Response: 20Hz – 20kHz
- Efficiency: 90%
- Dimensions: [Insert Dimensions Here]
- Weight: [Insert Weight Here]
- Input Connector: Bluetooth, 3.5mm Audio Jack
- Protection Features: Overcurrent, Overtemperature, Short-Circuit
SKU: n/a -
Modules and Motors
TDA8954TH Amplifier Board Dual Channel XH-M252
TDA8954TH Amplifier Board Specifications:
- Product Model: XH-M252
- Amplifier chip: TDA8954TH
- Input voltage: recommended AC dual 24V (up to 30V)
- Amplifier power: 2x420W
- Number of channels: left and right stereo
- Output impedance: 2-8Ohm
- Appearance size: 107*93*30mm
SKU: n/a