converter
Showing 1–15 of 16 results
-
Analog and Digital Converters
ADC0800 Converter 8-Bit Analog to Digital
ADC0800 Converter 8-Bit Analog to Digital Features
- Low cost
- +5V, 10V input ranges
- No missing codes
- Ratiometric conversion
- TRI-STATE outputs
- Fast TC 50 ms
- Contains output latches
- TTL compatible
- Supply voltages 5V DC and b12V DC
- Resolution 8 bits
- Linearity +1 LSB
- Conversion speed 40 clock periods
- Clock range
SKU: n/a -
Analog and Digital Converters
ADC0804 Converter 8-Bit Analog to Digital
ADC0804 Converter 8-Bit Analog to Digital Features
- 0V to 5V analog input voltage range with a single 5V supply
- Compatible with microcontrollers, access time is 135 ns
- Easy interface to all microprocessors
- Logic inputs and outputs meet both MOS and TTL voltage level specifications
- Works with 2.5V (LM336) voltage reference
- On-chip clock generator
- No zero adjust required
- 0.3[Prime] standard width 20-pin DIP package
- Operates ratio metrically or with 5 VDC, 2.5 VDC, or analog span-adjusted voltage reference
- Differential analog voltage inputs
SKU: ADC0804-Converter -
Analog and Digital Converters
ADC0808 Converter 8-Bit Analog to Digital
ADC0808 Converter 8-Bit Analog to Digital Features
- Easy Interface to All Microprocessors
- Operates Ratiometrically or with 5 VDC or Analog Span Adjusted Voltage Reference
- No Zero or Full-Scale Adjust Required
- 8-Channel Multiplexer with Address Logic
- 0V to VCC Input Range
- Outputs meet TTL Voltage Level Specifications
- ADC0808 Equivalent to MM74C949
- ADC0809 Equivalent to MM74C949-1
Specifications
- Resolution: 8 Bits
- Total Unadjusted Error: ±½ LSB and ±1 LSB
- Single Supply: 5 VDC
- Low Power: 15 mW
- Conversion Time: 100 μs
SKU: n/a -
Analog and Digital Converters
ADC0809 Converter 8-Bit Analog to Digital
ADC0809 Converter 8-Bit Analog to Digital Features
- Easy Interface to All Microprocessors
- Operates Ratiometrically or with 5 VDC or Analog Span Adjusted Voltage Reference
- No Zero or Full-Scale Adjust Required
- 8-Channel Multiplexer with Address Logic
- 0V to VCC Input Range
- Outputs meet TTL Voltage Level Specifications
- ADC0808 Equivalent to MM74C949
- ADC0809 Equivalent to MM74C949-1
Specifications
- Resolution: 8 Bits
- Total Unadjusted Error: ±½ LSB and ±1 LSB
- Single Supply: 5 VDC
- Low Power: 15 mW
- Conversion Time: 100 μs
SKU: n/a -
Analog and Digital Converters
ADC0831 Converter 8-Bit Analog to Digital
ADC0831 Converter 8-Bit Analog to Digital Features
- NSC MICROWIRE compatible — direct interface to COPS family processors
- Easy interface to all microprocessors, or operates “stand-alone”
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required
- 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible n 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
Specifications
- Resolution 8 Bits
- Total Unadjusted Error ±1⁄2 LSB and ±1 LSB
- Single Supply 5V DC
- Low Power 15 mW
- Conversion Time
SKU: n/a -
Analog and Digital Converters
ADC0832 Converter 8-Bit Analog to Digital
ADC0832 Converter 8-Bit Analog to Digital Features
- NSC MICROWIRE compatible — direct interface to COPS family processors
- Easy interface to all microprocessors, or operates “stand-alone”
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required n 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible
- 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
SKU: n/a -
Analog and Digital Converters
DAC0808 Converter 8-Bit Analog to Digital
DAC0808 Converter 8-Bit Analog to Digital Features:
- Part Number: DAC0808; Resolution: 8; DAC channels: 1; Interface: Parallel; Architecture: Multiplying DAC
- Output type: Unbuffered Current; Output range Max: 4.2(mA/V); Output range (Min): 0 (mA/V); Settling time: 0.15 µs
- Current Output; Relative accuracy: ±0.19% error maximum; Full-scale current match: ±1 LSB typ; Fast settling time: 150 ns typ
- Noninverting digital inputs are TTL and CMOS compatible; High speed multiplying input slew rate: 8 mA/µs; Power supply voltage range: ±4.5V to ±18V; Low power consumption: 33 mW @ ±5V; Operating temperature range: 0 ~ 70°C; Package DIP-16
- Package contains: 1 DAC0808 IC
SKU: n/a -
Analog and Digital Converters
DAC0831 Converter 8-Bit Analog to Digital
DAC0831 Converter 8-Bit Analog to Digital Features:
- Double Buffered, Single Buffered or Flow- Through Digital Data Inputs
- Easy Interchange and Pin-Compatible with 12-bit DAC1230 Series
- Directly Interfaces to all Popular Microprocessors
- Linearity Specified with Zero and Full Scale Adjust
- Works with ±10V Reference Full 4-Quadrant Multiplication
- Can be Used in the Voltage Switching Mode
- Logic Inputs are TTL Compatible
SKU: n/a -
Analog and Digital Converters
DAC0832 Converter 8-Bit Analog to Digital
DAC0832 Converter 8-Bit Analog to Digital Features
- Double-buffered, Single-Buffered or Flow-Through Digital Data Inputs
- Easy Interchange and Pin-Compatible with 12-bit DAC1230 Series
- Direct Interface to All Popular Microprocessors
- Linearity Specified with Zero and Full Scale Adjust Only—NOT BEST STRAIGHT LINE FIT.
- Works with ±10V Reference-Full 4-Quadrant Multiplication
- Can Be Used in the Voltage Switching Mode
- Logic Inputs Which Meet TTL Voltage Level Specs (1.4V Logic Threshold)
- Operates “STAND ALONE” (without μP) if Desired
- Available in 20-pin SOIC or PLCC Package
SKU: n/a -
Analog and Digital Converters
DC 4.5-40V To 5V 2A USB Charger DC-DC Step-down Buck Converter Voltmeter Module
Analog and Digital ConvertersDC 4.5-40V To 5V 2A USB Charger DC-DC Step-down Buck Converter Voltmeter Module
DC 4.5-40V USB Charger Converter Voltmeter Module Specifications:
- Input Voltage Range: 4.5V – 40V
- Output Voltage: 5V
- Output Current: Up to 2A
- Conversion Efficiency: >90%
- Display Accuracy: ±0.1V
- Operating Temperature: -40°C to +85°C
- Dimensions: (L x W x H) 60mm x 21mm x 14mm
- Weight: 15g
- Protection: Overcurrent, Overvoltage, Short Circuit
- Connector Type: Screw terminals for input and output
- Display Type: LED Voltmeter
SKU: n/a -
Modules and Motors
FT232 USB To TTL RS485 Converter Adapter Module
FT232 USB To TTL Converter RS485 Module Specifications:
- Chipset: FT232RL USB to UART converter chip
- Interface: USB 2.0
- Supported Networks: RS485, TTL Serial
- LED Indicators: Power, Data Transmission
- Operating Voltage: 3.3V to 5V
- Baud Rate Range: Adjustable, up to 3 Mbps
- Operating Temperature Range: -20°C to 60°C
- Dimensions: Compact form factor for easy integration (specific dimensions provided in the product documentation)
- Compatibility: Windows, macOS, Linux, and other major operating systems
- Plug-and-Play: Yes, no additional drivers required for most operating systems.
SKU: n/a -
Modules and Motors, Analog and Digital Converters
LTC1871 Boost Power Module High Power DC-DC 100W Adjustable Output 3.5-35v Step up Power Supply Converter Module Board with LED Digital Display Voltmeter
Modules and Motors, Analog and Digital ConvertersLTC1871 Boost Power Module High Power DC-DC 100W Adjustable Output 3.5-35v Step up Power Supply Converter Module Board with LED Digital Display Voltmeter
Specifications:
- Input voltage range: 3.5V-30V(Note: 30V is the maximum voltage when used please make sure input is lower than 30V, otherwise will burn out.)
- Output voltage range: 3.5V-30V (boost mode, the input must be less than or equal to the output voltage)
- Maximum input current: 10A (peak current)
- Continuous Current: 6A
- Size: 67cm(L) * 42cm(W) * 18cm(H)
- Output power: Max 100W {Note: according to the law of conservation of power, computation under the condition of rated output current: Uin*Iin*efficiency =Uout*Iout(Uin: input voltage, Iin: input current)}
- Weight: 35g
- Color: Red
- Voltmeter Accuracy: ± (5 ‰ + 1 digit)
- Static power consumption: Typical about 15mA(With the input voltage, output voltage and the color closely related to the digital pipe. The actual current there is a deviation)
- IN +: Positive Input, IN-: Negative Input. OUT +: Positive output, OUT-: Negative output.
SKU: n/a -
Analog and Digital Converters
Mini MP1584EN DC-DC Buck Converter Adjustable Power Supply Module
- Specifications:
- Input Voltage: 4.5V – 28V
- Output Voltage: 0.8V – 20V (adjustable)
- Output Current: Up to 3A
- Conversion Efficiency: Up to 92%
- Adjustment Method: Potentiometer for precise voltage adjustment
- Dimensions: Compact form factor, suitable for space-constrained projects
- Protection: Overcurrent protection
- Application: Ideal for Arduino projects requiring variable power supply voltages
- Operating Temperature Range: -40°C to +85°C
- Connector Type: Standard header pins for easy integration into breadboards and projects.
SKU: n/a - Specifications:
-
Analog and Digital Converters
RS232 To RS485 Serial Communication Data Converter
RS232 To RS485 Converter Specifications:
- Protocol Support:
- RS232 (Recommended Standard 232)
- RS485 (Recommended Standard 485)
- Voltage Range:
- Input: 5V to 24V DC
- Output: 5V to 24V DC
- Data Rate:
- Supports configurable data rates up to [specified maximum rate] bps (bits per second).
- Operating Temperature:
- Suitable for operation in a temperature range of [specified range] degrees Celsius.
- Dimensions:
- Compact design with dimensions of [specified dimensions] for easy integration into various setups.
- Connectors:
- RS232: [Type of connector]
- RS485: [Type of connector]
- Indicators:
- Power LED: [Indicator description]
- TX LED: [Indicator description]
- RX LED: [Indicator description]
- Protection:
- Built-in surge protection to safeguard connected devices.
- Mounting:
- DIN rail mountable for easy and secure installation.
SKU: n/a - Protocol Support:
-
Modules and Motors
USB to ESP8266 Adapter
USB to ESP8266 Adapter Module Specifications:
- Connector Types: USB-A (Male) to ESP8266-compatible connector
- Compatibility: Works with a wide range of ESP8266 modules
- Data Transfer Rate: Supports high-speed data transfer for efficient programming
- Power Supply: Draws power directly from the USB port, eliminating the need for an external power source
- Dimensions: Compact form factor for easy integration into different projects
- Operating System Support: Compatible with major operating systems, including Windows, macOS, and Linux
SKU: n/a
