0.96 Inch 4-pin Blue IIC I2C OLED Display Module 12864
0.96 Inch OLED Display Module 12864 4-pin Blue IIC I2C Specifications:
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
- Mini Size: 2.7 x 2.8cm
- Only Need 2 I/O Port to Control
- Full Compatible Arduino, 51
₨425
CompareThe 0.96 Inch OLED Display Module 12864 4-pin Blue IIC I2C is a compact and versatile display solution designed for easy integration into various electronic projects. This OLED (Organic Light-Emitting Diode) module offers a vibrant blue display with a resolution of 128×64 pixels, providing clear and crisp visual feedback. Its 4-pin IIC (Inter-Integrated Circuit) interface ensures seamless communication with microcontrollers, making it suitable for a wide range of applications, including IoT devices, wearable gadgets, and DIY electronics projects.
Based on 0 reviews
Be the first to review “0.96 Inch 4-pin Blue IIC I2C OLED Display Module 12864”
You must be logged in to post a review.
Related products
-
Arduino, Modules and Motors
Joystick PS2 Breakout Module
Joystick PS2 Breakout Module Specifications:
- Input Voltage: 5V DC
- Output: Analog voltage signals for X and Y axes
- Compatibility: PS2-style joysticks
- Interface: Breakout board with standard pin headers
- Dimensions: Compact size for easy integration into projects
- Operating Temperature: -20°C to 70°C
- Material: High-quality and durable components
- LED Indicators: Power and status indicators for easy troubleshooting
- Mounting Holes: Integrated mounting holes for secure attachment to surfaces or project enclosures.
SKU: n/a -
Modules and Motors, Arduino
W5100 Ethernet Network Module Mini For Arduino
W5100 Ethernet Network Module Specifications:
- Controller: Wiznet W5100
- Interface: SPI (Serial Peripheral Interface)
- Ethernet Speeds: 10Base-T and 100Base-TX
- MicroSD Card Slot: Yes
- Power Supply: 3.3V (via Arduino) or external power source
- Power Consumption: Low power consumption for energy-efficient operation
- Dimensions: Compact form factor for space-efficient integration
- Status LEDs: Power, Link, Full Duplex, and Speed
- Operating Temperature: -40°C to 85°C
SKU: n/a -
Zigbee Boards
XBEE Module Zigbee (S1/S2)
XBEE Module Features & Specifications:
- Indoor Range up to 100 ft. (30 m) &Â Outdoor RF line-of-sight Range up to 300 ft. (100 m)
- Interface: Serial(UART) at 1200-115200 bps
- Supply Voltage: 2.8 – 3.4 V
- Transmit Current (typical) 45mA (@ 3.3 V)
- Idle / Receive Current (typical) 50mA (@ 3.3 V)
- Operating Frequency:Â ISM 2.4 GHz
- Antenna: Whip antenna
- Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
- Number of Channels: (software selectable) 16 Direct Sequence Channels
- Addressing Options: PAN ID, Channel and Addresses
- ADC and I/O line support
- AT and API Command Modes for configuring module parameters
- Extensive command set
- Small form factor
SKU: n/a - Indoor Range up to 100 ft. (30 m) &Â Outdoor RF line-of-sight Range up to 300 ft. (100 m)
-
Arduino
Arduino Uno R3
Arduino Uno R3 board Specifications:
- It is an ATmega328P based Microcontroller
- The Operating Voltage of the Arduino is 5V
- The recommended input voltage ranges from 7V to 12V
- The i/p voltage (limit) is 6V to 20V
- Digital input and output pins 14
- Digital input & output pins (PWM)-6
- Analog i/p pins are 6
- DC Current for each I/O Pin is 20 mA
- DC Current used for 3.3V Pin is 50 mA
- Flash Memory -32 KB, and 0.5 KB memory is used by the boot loader
- SRAM is 2 KB
- EEPROM is 1 KB
- The speed of the CLK is 16 MHz
- In Built LED
- The length and width of the Arduino are 68.6 mm X 53.4 mm
- The weight of the Arduino board is 25 g
SKU: n/a
There are no reviews yet.