Arduino TFT Display 3.2 Inch LCD
Arduino TFT Display 3.2 Inch LCD Features:
- Support Arduino Mega2560 Directly inserted
- With a Full-angle IPS TFT panel
- OnBorad level conversion chip for 5V/3.3V MCU
- Compatible with 3.3/5 V operation voltage level
- Compatible with Arduino-Series Development Board.
- (Please notice: This Screen is not a touch screen)
- Provided 12-examples with Arduino,3-examples with STM32
- With an SD Card Socket
- With SPI FLASH circuit
Specifications:
- Driver IC: ILI9481
- Screen Size: 3.2 inch
- Display Size : 67.68(W) * 45.12(L) (mm)
- Backlight Type: Highlighting White 6 LED
- Screen Resolution: 480 * 320 Pixel (HVGA)
- Power Consumption : 80~110(mA)
- Screen Type: TFT (IPS Whole Perspective)
- Power : 5V / 3.3V
- Touch Function: None
- Data Bus: 16 Channels Parallel Bus
- Module Interface : 36Pin (Compatible with Arduino Mega2560)
- Size : 89.92(W) * 54.25(L) (mm)
₨4,200
CompareArduino TFT Display 3.2 Inch LCD with 262 K color 480 x 320 resolutions. The controller of this LCD module is HX8357B, it supports a 16-wire Data Bus interface. Moreover, this module includes the 5 V-3.3 V power conversion circuit and Level conversion circuit, This Module can be directly inserted into the Arduino Mega2560 Board,it also includes the SD card socket and SPI FLASH circuit.
Parameters:
- Display Type: 3.2 inch a-si TFT LCD Module
- Glass Type: TFT IPS(Full-Angle)
- Display Resolution: 480 X RGB X 320 Pixels
- Backlight: 6 chip High-Light white LEDs
- Control IC: ILI9481
- Interface: 16 Bit parallel interface
- PCB Module size: 89.92 mm X 54.25 mm
- LCD Area(W x H x T): 50.74 mm X 78.35 mm X 1.88 mm
- Active Area(W x H): 67.68 mm X 45.12 mm
Based on 0 reviews
Be the first to review “Arduino TFT Display 3.2 Inch LCD”
You must be logged in to post a review.
Related products
-
Mother Board, Arduino
CNC Shield V4 Controller Board For Arduino Nano
CNC Shield V4 Controller Board For Arduino Nano Specifications:
- Board Type: CNC Shield V4
- Microcontroller Compatibility: Arduino Nano
- Motor Driver Compatibility: A4988, DRV8825, and similar stepper motor driver modules
- Axis Control: Up to 4 axes
- Endstop Support: Yes, with connectors for limit switches and homing sensors
- PWM Control: Yes, for spindle speed and laser intensity control
- Power Supply Input: 12-36V DC
- Dimensions: Compact form factor for space-efficient installations
SKU: n/a -
Arduino, Raspberry Pi
PCA9685 16-Channel 12-bit PWM Servo Driver – I2C interface
16 Channel PWM Servo Driver 12-Bit I2C Interface – PCA9685 uses the I2C method, so only four lines can be connected to the Arduino device:
“Classic” Arduino pin mode:- + 5v -> VCC
- GND -> GND
- Analog 4 -> SDA
- Analog 5 -> SCL
- Old Mega pin way:
- + 5v -> VCC
- GND -> GND
- Digital 20 -> SDA
- Digital 21 -> SCL
SKU: 950 -
Sensors, Arduino, Modules and Motors
801S Vibration Shock Sensor For Arduino
801S Vibration Shock Sensor For Arduino Specifications:
- Operating Voltage: 3.3V – 5V DC
- Current Consumption: <1mA
- Output Type:
- Digital Output: High/Low (TTL)
- Analog Output: 0V to Vcc (0 – 5V)
- Detection Range: Adjustable via sensitivity potentiometer
- Frequency Response: 10Hz – 10kHz
- Dimensions: 32mm x 14mm x 7mm
- Mounting Holes: Two mounting holes for easy integration into various projects.
- Operating Temperature: -10°C to +70°C
- Interface: 3-pin interface (VCC, GND, Signal)
- Compatibility: Compatible with Arduino and other microcontrollers with digital and analog input capabilities.
SKU: n/a -
Arduino
OV7670 Camera Module for Arduino
OV7670 Camera Module for Arduino Specifications:
-
- Image Sensor: Omnivision OV7670
- Resolution: VGA (640×480 pixels)
- Frame Rate: Adjustable, up to 30 frames per second
- Interface: I2C
- Supply Voltage: 3.3V (Typical), 5V-tolerant I/O
- Operating Temperature: -30°C to 70°C
- Dimensions: Compact form factor for easy integration into various projects
- Lens Compatibility: Standard M12 lens mount for flexibility in lens selection
- Signal Processing: Onboard signal processing for reduced microcontroller workload
- Compatibility: Designed for use with Arduino microcontrollers
SKU: n/a -
There are no reviews yet.