18650 Lithium Battery Charger Protection Board Module
Specifications:
- Voltage Input: 12.6V (3S lithium-ion battery configuration)
- Charging Current: Up to 10A
- Protection Features: Overcharge protection, over-discharge protection, over-current protection, short circuit protection
- Balancing Voltage: 4.2V ± 0.05V
- Temperature Range: -20°C to 60°C
- Compatibility: 3-series 18650 lithium-ion battery packs
₨220 ₨300
The 18650 Lithium Battery Charger Protection Module is a compact and efficient charging solution designed to ensure the safe and optimal charging of 18650 lithium-ion batteries. This protection module is an essential component for anyone seeking to charge 18650 batteries reliably, preventing overcharging, over-discharging, and other potential hazards associated with lithium-ion batteries. Its advanced features make it a reliable choice for various applications, including flashlights, electronic devices, and portable power banks.
Related products
-
-
Modules and Motors
HC06 HC09 Bluetooth Module
HC06 HC09 Bluetooth Module firmware are the modules which are factory set to be Master or Slave modules. Master and slave mode cannot be switched from the factory setting. HC-04 is an industrial grade product, HC-06 is a commercial grade product.
The modules with the HC-09 firmware are replacements for the HC-06 and HC-07 modules.
SKU: n/a -
-
Modules and Motors
RC522 RFID Card Reader
RC522 RFID Card Reader Features and Benefits
- Highly integrated analog circuitry to demodulate and decode responses
- Buffered output drivers for connecting an antenna with the minimum number of external components
- Supports ISO/IEC 14443 A/MIFARE and NTAG
- The typical operating distance in Read/Write mode is up to 50 mm depending on the antenna size and tuning
- Supports MF1xxS20, MF1xxS70 and MF1xxS50 encryption in Read/Write mode
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd
- Supports MFIN/MFOUT
- Additional internal power supply to the smart card IC connected via MFIN/MFOUT
- Supported host interfaces
- SPI up to 10 Mbit/s
- I 2C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on the pin voltage supply
- FIFO buffer handles 64-byte send-and-receive
- Flexible interrupt modes
- Hard reset with low power function
- Power-down by software mode
- Programmable timer
- Internal oscillator for connection to 27.12 MHz quartz crystal
- 2.5 V to 3.3 V power supply
- CRC coprocessor
- Programmable I/O pins
- Internal self-test
SKU: n/a -
Modules and Motors
RFID Card 125KHz
RFID Card 125KHz Specifications:
- Frequency: 125KHz
- Material: PVC or PET, ensuring durability
- Dimensions: Standard credit card size (85.6 x 54 mm)
- Operating Temperature: -20°C to +50°C (-4°F to +122°F)
- Read Range: Dependent on the RFID reader used, typically ranges from a few centimetres to several meters
- Data Storage: Typically has a fixed unique identifier (UID) programmed during manufacturing
- Printable Area: Standard ISO CR80 printing area (84.6 x 53.98 mm)
- Compatibility: Compatible with 125KHz RFID readers adhering to industry standards
“>
SKU: n/a
There are no reviews yet.