2N3906 PNP Transistor
2N3906 PNP Transistor Features
- Bi-Polar PNP Transistor
- DC Current Gain (hFE) is 300 maximum
- Continuous Collector current (IC) is 200mA
- Emitter Base Voltage (VBE) is 5V
- Base Current(IB) is 5mA maximum
- Collector Emitter Voltage (VCE) is 40V
- Collector Base Voltage (VCB) is 40V
- Available in To-92 Package
₨4
Compare2N3906 PNP Transistor has a gain value of 110 to 300, this value determines the amplification capacity of the transistor. The maximum amount of current that could flow through the Collector pin is 200mA, hence we cannot connect loads that consume more than 200mA using this transistor. To bias a transistor we have to supply current to the base pin, this current (IB) should be limited to 5mA.
2N3906 PNP transistor hence the collector and emitter will be closed (Forward biased) when the base pin is held at the ground and will be opened (Reverse biased) when a signal is provided to the base pin.
Based on 0 reviews
Be the first to review “2N3906 PNP Transistor”
You must be logged in to post a review.
Related products
-
Transistors
2SB649 Transistor
2SB649 Transistor details:
Material of Transistor: Si
Polarity: PNP
Maximum Collector Power Dissipation (Pc): 20 W
Maximum Collector-Base Voltage |Vcb|: 160 V
Maximum Collector-Emitter Voltage |Vce|: 120 V
Maximum Collector Current |Ic max|: 1.5 A
Max. Operating Junction Temperature (Tj): 150 °C
Transition Frequency (ft): 140 MHz
Collector Capacitance (Cc): 27 pF
Forward Current Transfer Ratio (hFE), MIN: 60
Noise Figure, dB: –
Package: TO126SKU: n/a -
Transistors
TIP147 Transistor
The devices are manufactured in planar technology with a “base island” layout and monolithic Darlington configuration. The resulting transistors show exceptional high gain performance coupled with very low saturation voltage.
- Monolithic Darlington configuration
- Integrated antiparallel collector-emitter diode
SKU: n/a -
There are no reviews yet.