Modules and Motors
BH1750 Light Sensor
BH1750 Light Sensor Features
- Illuminate to Digital Converter
- Wide range and High resolution. ( 1 – 65535 lx )
- Low Current by power down function
- 50Hz / 60Hz Light noise reject-function
- I2C bus Interface ( f / s Mode Support )
- No need for any external parts
- It is possible to select 2 types of I2C slave-address.
- It is possible to detect min. 0.11 lx, max. 100000 lx by using this function.
₨450
CompareThe BH1750 Light Sensor ambient light intensity sensor breakout board has a 16-bit A2D converter built-in that can directly output a digital signal. The output from the sensor is in Lux (Lx) and does not require advanced calculations in the sketch. The BH1750 communicates using the I2C Protocol. BH1750 FVI Is a Digital Light sensor, which is a digital Ambient Light Sensor IC for the I2C bus interface. This IC is the most suitable for obtaining the ambient light data for adjusting the LCD and Keypad backlight power of Mobile phones. It is possible to detect a wide range at High resolution. ( 1 – 65535 lx ).
Based on 0 reviews
Be the first to review “BH1750 Light Sensor”
You must be logged in to post a review.
Related products
-
Modules and Motors
Bluetooth Module BLE-CC-2541
Features
- RF
- 2.4-GHz Bluetooth low energy Compliant and Proprietary RF System-on-Chip
- Supports 250-kbps, 500-kbps, 1-Mbps, 2-Mbps Data Rates
- Excellent Link Budget, Enabling Long-Range Applications Without External Front End
- Programmable Output Power up to 0 dBm
- Excellent Receiver Sensitivity (–94 dBm at 1 Mbps), Selectivity,
and Blocking Performance - Suitable for Systems Targeting Compliance With Worldwide Radio
Frequency Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe),
FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
- Layout
- Few External Components
- Reference Design Provided
- 6-mm × 6-mm QFN-40 Package
- Pin-Compatible With CC2540 (When Not Using USB or I2C)
- Low Power
- Active-Mode RX Down to: 17.9 mA
- Active-Mode TX (0 dBm): 18.2 mA
- Power Mode 1 (4-µs Wake-Up): 270 µA
- Power Mode 2 (Sleep Timer On): 1 µA
- Power Mode 3 (External Interrupts): 0.5 µA
- Wide Supply-Voltage Range (2 V–3.6 V)
- TPS62730 Compatible Low Power in Active Mode
- RX Down to: 14.7 mA (3-V supply)
- TX (0 dBm): 14.3 mA (3-V supply)
- Microcontroller
- High-Performance and Low-Power 8051 Microcontroller Core
With Code Prefetch - In-System-Programmable Flash, 128- or 256-KB
- 8-KB RAM With Retention in All Power Modes
- Hardware Debug Support
- Extensive Baseband Automation, Including Auto-Acknowledgment
and Address Decoding - Retention of All Relevant Registers in All Power Modes
- High-Performance and Low-Power 8051 Microcontroller Core
- Peripherals
- Powerful Five-Channel DMA
- General-Purpose Timers (One 16-Bit, Two 8-Bit)
- IR Generation Circuitry
- 32-kHz Sleep Timer With Capture
- Accurate Digital RSSI Support
- Battery Monitor and Temperature Sensor
- 12-Bit ADC With Eight Channels and Configurable Resolution
- AES Security Coprocessor
- Two Powerful USARTs With Support for Several Serial Protocols
- 23 General-Purpose I/O Pins
(21 × 4 mA, 2 × 20 mA) - I2C interface
- 2 I/O Pins Have LED Driving Capabilities
- Watchdog Timer
- Integrated High-PerformanceComparator
- Development Tools
- CC2541 Evaluation Module Kit (CC2541EMK)
- CC2541 Mini Development Kit (CC2541DK-MINI)
- SmartRF™ Software
- IAR Embedded Workbench™ Available
SKU: n/a - RF
-
-
Modules and Motors
A3144EUA Sensor
A3144EUA Sensor FEATURES and BENEFITS
- Superior Temp. Stability for Automotive or Industrial Applications
- 4.5 V to 24 V Operation … Needs Only An Unregulated Supply
- Open-Collector 25 mA Output … Compatible with Digital Logic
- Reverse Battery Protection
- Activate with Small, Commercially Available Permanent Magnets
- Solid-State Reliability
- Small Size
- Resistant to Physical Stress
SKU: n/a -
Modules and Motors
GY-271 Magnetometer HMC5883L Module
GY271 Magnetometer HMC5883L Module Features:
- Gold plating PCB, applying machine welding technology, superb technique and reliable quality guarantee!
- Name: HMC5883L Module (Triaxial Magnetic Field Module);
- Type: GY-271;
- Used Chip: HMC5883L;
- Power Supply: 3~5V;
- Communication Mode: Standard IIC communicating protocol;
- Measuring Range: ±1.3-8 Gauss.
SKU: GY271-Magnetometer -
Modules and Motors
PL2303 USB To TTL RS232 Converter Adapter Module
PL2303 USB To TTL Converter RS232 Specifications:
- Chipset: PL2303
- Interface: USB 2.0
- Voltage Levels: 3.3V or 5V selectable
- Indicators: Power and data transmission LEDs
- Compatibility: Windows, Linux, macOS
- Dimensions: Compact form factor for easy integration
- Driver Support: Included for easy installation
- Applications: Programming, debugging, and interfacing with microcontrollers and Arduino boards
SKU: n/a
There are no reviews yet.