Dust Sensor Module GP2Y1010AU0F
Dust Sensor Module GP2Y1010AU0F Specifications:
- Particle Size Range: 0.8μm to 2.5μm
- Voltage Supply: 5V DC
- Output Voltage Range: 0.4V to 4.0V
- Operating Temperature Range: -10°C to 65°C
- Operating Humidity Range: 10% to 90% RH (non-condensing)
- Response Time: Less than 1 second
- Dimensions: 46.0mm x 30.0mm x 17.6mm
- Weight: Approximately 15 grams
- Output Interface: Analog Voltage Output
- LED Indicator: Indicates sensor operation and can be used for system diagnostics.
₨1,250
CompareThe Dust Sensor Module GP2Y1010AU0F is a compact and efficient device designed for measuring the concentration of dust particles in the air. This module utilizes an advanced optical sensing technique to detect and quantify the presence of particulate matter, providing valuable insights into air quality. With its reliable performance and user-friendly design, the GP2Y1010AU0F is ideal for applications such as indoor air quality monitoring, HVAC systems, and environmental monitoring projects
Based on 0 reviews
Be the first to review “Dust Sensor Module GP2Y1010AU0F”
You must be logged in to post a review.
Related products
-
Modules and Motors
EM-18 RFID Reader Module
EM 18 RFID Reader Module Specifications:
- Operating frequency: 125kHz
- Operating voltage: DC 5V
- Supply current: <50mA
- Read distance: up to 100mm (depending on the tag used)
- Interface: UART (TTL level)
- Dimensions: 40mm x 40mm x 16mm
- Communication protocol: UART
- Baud rate: 9600, 8, N, 1
SKU: n/a -
Breakout Boards
Breadboard Power Supply Module
Specifications:
- Input voltage: 10-24VDC, recommended 18V wall power supply (Power Jack)
- Output voltage: 3.3V/5V/Adjustable 1.8-12V
- Output current: 650mA
- Pin Headers for input and output
- Central positive DC 2.1 power jack for input
- Size: 2.64″ x 1.69
SKU: n/a -
-
-
Arduino, Raspberry Pi
PCA9685 16-Channel 12-bit PWM Servo Driver – I2C interface
16 Channel PWM Servo Driver 12-Bit I2C Interface – PCA9685 uses the I2C method, so only four lines can be connected to the Arduino device:
“Classic” Arduino pin mode:- + 5v -> VCC
- GND -> GND
- Analog 4 -> SDA
- Analog 5 -> SCL
- Old Mega pin way:
- + 5v -> VCC
- GND -> GND
- Digital 20 -> SDA
- Digital 21 -> SCL
SKU: 950
There are no reviews yet.