Modules and Motors
EGS002 Pure Sine Wave Inverter SPWM Driver Board 5V
EGS002 Pure Sine Wave Inverter SPWM Driver Board Specifications:
- 5V power supply
- 4 pins of pure sine wave output frequency set:
- Integrated and bipolar modulation
- Along with lineage control, pin 4 time:
- External 12 MHz crystal oscillator
- PWM carrier frequency is equal to 23.4KHz
- Has voltage, current and temperature feedback
- Overvoltage, under voltage, overcurrent, overheating protection circuit
- Has serial communication to adjust the output voltage, frequency and other parameters
“>
₨1,100 – ₨1,500
CompareEGS002 Inverter Driver Board 5V is a sine wave inverter controller that can be used to have a pure sine wave inverter without the need for programming. In this circuit, ASIC EG8010 is used as a control chip and IR2113S is used as a MOSFET driver. This board can control voltage, current, temperature, fan speed and LED display. Also, by connecting to an LCD, we will be able to monitor the output voltage, current, temperature and frequency. Using jumpers, we can limit or expand the functions of the board. EGS002 Inverter Driver Board
“>
| Version | Without LCD, With LCD |
|---|
Related products
-
Modules and Motors
ESP-01 ESP8266 WiFi Module
ESP 01 WiFi Module ESP8266 Features
- 802.11 b/g/n protocol
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, and power management units
- +19.5dBm output power in 802.11b mode
- Integrated temperature sensor
- Supports antenna diversity
- Power down leakage current of < 10uA
- Integrated low power 32-bit CPU could be used as application processor
- SDIO 2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4s guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: ESP-01-ESP8266-WiFi-Module -
-
Modules and Motors
L297 & L298 Stepper Motor Driver
L297 L298 Stepper Motor Driver Features
- Easily adjustable motor current (0 to 2A)
- Full and Half stepping modes
- Step, Direction and Enable inputs (5V logic level)
- Synchroniseable when using multiple drivers
- Enable input can be connected to ground to disable the motor
SKU: n/a -
-
Modules and Motors
Bluetooth Module BLE-CC-2541
Features
- RF
- 2.4-GHz Bluetooth low energy Compliant and Proprietary RF System-on-Chip
- Supports 250-kbps, 500-kbps, 1-Mbps, 2-Mbps Data Rates
- Excellent Link Budget, Enabling Long-Range Applications Without External Front End
- Programmable Output Power up to 0 dBm
- Excellent Receiver Sensitivity (–94 dBm at 1 Mbps), Selectivity,
and Blocking Performance - Suitable for Systems Targeting Compliance With Worldwide Radio
Frequency Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe),
FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
- Layout
- Few External Components
- Reference Design Provided
- 6-mm × 6-mm QFN-40 Package
- Pin-Compatible With CC2540 (When Not Using USB or I2C)
- Low Power
- Active-Mode RX Down to: 17.9 mA
- Active-Mode TX (0 dBm): 18.2 mA
- Power Mode 1 (4-µs Wake-Up): 270 µA
- Power Mode 2 (Sleep Timer On): 1 µA
- Power Mode 3 (External Interrupts): 0.5 µA
- Wide Supply-Voltage Range (2 V–3.6 V)
- TPS62730 Compatible Low Power in Active Mode
- RX Down to: 14.7 mA (3-V supply)
- TX (0 dBm): 14.3 mA (3-V supply)
- Microcontroller
- High-Performance and Low-Power 8051 Microcontroller Core
With Code Prefetch - In-System-Programmable Flash, 128- or 256-KB
- 8-KB RAM With Retention in All Power Modes
- Hardware Debug Support
- Extensive Baseband Automation, Including Auto-Acknowledgment
and Address Decoding - Retention of All Relevant Registers in All Power Modes
- High-Performance and Low-Power 8051 Microcontroller Core
- Peripherals
- Powerful Five-Channel DMA
- General-Purpose Timers (One 16-Bit, Two 8-Bit)
- IR Generation Circuitry
- 32-kHz Sleep Timer With Capture
- Accurate Digital RSSI Support
- Battery Monitor and Temperature Sensor
- 12-Bit ADC With Eight Channels and Configurable Resolution
- AES Security Coprocessor
- Two Powerful USARTs With Support for Several Serial Protocols
- 23 General-Purpose I/O Pins
(21 × 4 mA, 2 × 20 mA) - I2C interface
- 2 I/O Pins Have LED Driving Capabilities
- Watchdog Timer
- Integrated High-PerformanceComparator
- Development Tools
- CC2541 Evaluation Module Kit (CC2541EMK)
- CC2541 Mini Development Kit (CC2541DK-MINI)
- SmartRF™ Software
- IAR Embedded Workbench™ Available
SKU: n/a - RF
